Availability
Ford Performance Parts camshaft drive kits include all of the components that you need for proper timing. They're offered in numerous packages for a variety of applications and include high-quality production components for increased durability. Depending on vehicle, kits may include new production: * Tensioner arms * Chain guides * Primary and secondary timing chains * Primary and secondary timing chain tensioners * Camshaft sprockets, spacers, bolts, and washers * Camshaft VCT phasers and bolts * Crankshaft sprockets, spacers, and washers * Crank position trigger wheel * Dowel pins and fasteners
( 47 )
$522.99
—
$678.99
Serious power needs serious strength, so Ford Performance Parts offers these 5.0 Coyote Mustang forged crankshafts for 5.0L Coyote engines. These cranks are designed to be absolutely tough to take the abuse that racing can inflict. They are constructed from forged 4130 steel and are precision-machined and balanced to ensure that they are they ready to go in your track or hardcore street car! Whether you are planning on dominating the strip, street, or road course, these Ford Performance Parts 5.0 Coyote Mustang forged crankshafts are ready for the challenge.
Not Yet Reviewed
$599.99
These good looking steering wheels from Ford Performance Parts are direct OE replacements crafted from the finest wood and leather. They'll retain the use of your air bag and cruise control switches without modifications while adding some style to your cockpit.
( 12 )
$514.99
—
$599.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 15 )
$689.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$741.99
Ford Performance Parts high-flow fuel injectors are specifically designed for performance applications. They are offered in a variety of flow rates, with a range of impedances, long or medium lengths, and USCAR or Jetronic/Minitimer-style electrical connectors (adapter kits are sold separately). The injectors work best with air meters with revised calibrations and have been specially trimmed for high-flow rates. Notes: * All injector flow rates are quoted at a delta pressure of 39.15 psi * To convert to a delta pressure of 43.5 psi, multiply flow rate by 1.054
( 44 )
$597.99
—
$610.99
Ford Performance Parts F-150 complete suspension lowering kits reduce front ride height by 1.3 inches and rear ride height by 2.5 inches, providing a leveled sport truck stance. Each kit includes precision-tuned front coils, laser-cut steel lowering shackles with urethane bushings, and laser-cut strut spacer for front height adjustability. Front spring rate: 625 lbs.-in. The kits are designed for fitment on 2021-24 F-150 2WD and 4WD Regular Cab, SuperCab and SuperCrew trucks. * Current restrictions are as follows: -- Does not fit Tremor -- Does not fit Raptor -- Does not fit any variant of the Lightning -- Does not fit Limited Trim -- Does not fit any "High Pay Load Package" -- Does not fit any variant of PowerBoost
( 1 )
$525.99
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
Track-tuned by Ford Performance engineers--Ford 2015-17 Mustang track strut and shock kits. Designed specifically for their track handling packs and to be used with their lowering springs (not included), these kits fit Mustang GT and 2.3L EcoBoost coupes. The kits include: * Track front dampers * Track rear shocks * Front strut top mounts * Front strut spring retainer * Front damper anti-squeak pads * Strut rod nuts * Thread lock
Not Yet Reviewed
$682.99
Ford Performance Parts Tremec Cobra R bellhousings are designed to mount the Tremec 3550 manual transmission to Ford 4.6L/5.4L modular gas engines. They are manufactured from cast aluminum and feature all factory mounting positions. The Tremec Cobra R bellhousings may require minor modifications for transmission clearance and mounting in some vehicle applications.
( 5 )
$669.99
Ford Performance Parts ignition coil sets are stock replacement coils for a variety of late model Ford V8 engines. They're required when installing some Ford Performance heads on 2005-07 and early 2008 Mustang GTs originally equipped with "High Thread" design heads. Fit your vehicle with the right ignition coil sets designed by the original maker and rest assured that the performance will be exceptional.
( 19 )
$520.99
Although they are direct replacements for original equipment Ford and Lincoln parts, Ford Performance Parts IRS knuckle sets are also perfect for kit car custom builds using independent rear suspensions. They are manufactured from high-quality cast aluminum and include preinstalled bushings. Depending on the application, they may include hubs. Others require that hubs be purchased separately.
( 2 )
$553.99
Give your transmission an overhaul with these 94-piece T-5 transmission rebuild kits from Ford Performance Parts. You get everything you need for a complete and successful rebuild.
( 16 )
$608.99
Ford Performance Parts clutch kits are available in several diameters and a wide variety of configurations to meet the specific requirements of your street, street/strip, or race vehicle. Depending on the application, available features include: * Heavy duty-organic linings * Carbon/copper linings on flywheel side and carbon linings on pressure plate side * Heavy-duty diaphragm kits with approximately 40 percent more capacity than stock clutches * Heavy-duty diaphragm-types with centrifugal assist and approximately 25 percent more capacity than OE units * Stronger covers and revised internal geometry to reduce clutch pedal effort by 10 percent * Nodular iron and cast iron plates * Some installations require new flywheels * Metric fasteners and dowel pins must be used with some clutches * Note: May mix and match Ford Performance Parts clutch discs and pressure plates, but do NOT install a FPP pressure plate with a stock disc or vice-versa as disengagement problems may occur
( 39 )
$559.99
Enhance the performance of your 2.7L engine in your late-model Bronco! The Ford Performance engineered and dyno-tested calibration delivers their promise of more power and increased performance without sacrificing reliability. Product details: * Improved throttle response throughout RPM range * Optimized shift schedule * Peak torque = 433 lbs.-ft. at 3,500 rpm * Peak power = 355 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). Additional modifications required. * Ability to change axle ratio/FDU up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * Not available in California for 2022-23 model year vehicles * M-12655-F ProCal 4 delivery tool included * The M-9603-B23 calibration is also available * Premium fuel required NOTES: *Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. * Calibration and ProCal 4 tool are VIN locked. * ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode." * ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
( 1 )
$754.99
If you're rebuilding or servicing your 5.2L Predator engine, these camshaft finger followers are direct-fit OEM replacements from Ford Performance Parts. The kit contains 32 followers for the 2020 Shelby GT500 Mustangs—and can also serve as a bolt-on upgrade for the 2015-20 GT350 or the Gen 3 2018+ GT Coyote cylinder heads. Features and benefits: * Higher strength wheel and bearings * Premium design and high-strength materials make these a durable part for your modular engine * These are genuine Ford Performance parts, so they will be a direct-fit replacement for your originals * Durable steel construction
Not Yet Reviewed
$610.99
Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$734.99
Whether you're dressing up or simply replacing an old oil pan on your vehicle, Ford Performance Parts has the oil pan for you. These oil pans are available in several finishes for a variety of applications, so there's sure to be one to suit your needs and your style.
( 97 )
$631.50
—
$765.99
Ford Performance Parts exhaust systems bring you the ultimate in high performance. All components are made from mandrel-bent, stainless steel and are produced to Ford Performance Parts specifications. These high-quality, low-restriction kits are attractively priced, guaranteed to fit, and produce world-class power. They are available with a variety of exhaust tip designs and finishes to not only sound great but look great too. Cat-back systems bolt directly to the stock factory catalytic converters, keeping your vehicle 100 percent emission compliant while providing an aggressive sound. Ford Performance Parts exhaust systems utilize stock hangers and mounts and includes the necessary hardware.
( 47 )
$723.99
Ford Performance Parts offers accessory drive kits for the (FEAD) 7.3L Godzilla V8 crate engine. These front accessory drive kits come with the alternator, alternator bracket, power steering pump, drive belt, belt tensioner, idler pulley, and required installation hardware—saving you the valuable time of having to obtain and match all parts individually. You can depend on Ford Performance for the parts and accessories that your engine needs.
Not Yet Reviewed
$799.99
Ford Performance Parts Torsen differentials use a worm gear friction system that will not wear out like conventional clutch-type positive traction differentials. These differentials ensure your engine's power is transferred to the wheels with the maximum traction. The unique torque-sensing ability of the Torsen design, and the smooth engagement of Torsen-style limited-slip differentials, make them the perfect choice for your street, strip, or off-road vehicle.
( 6 )
$709.99
—
$732.99
Ford Performance Parts rear spoilers with Gurney flap adds aggressive style with a purpose. A factory option on some GT models, you can update your 2015-21 Mustang coupe with one of these spoilers featuring a removeable Gurney flap for added downforce. Ford rear spoilers have a gloss black OEM finish and includes mounting hardware and installation template.
( 2 )
$572.99
Ford Performance Parts 2021+ F-150 front skid plate kits will provide the undercarriage protection you need for your new Raptor with the same skid plates that were used on the 2017 Ford Raptor Race truck. Made from powdercoated 3/16 in. thick aluminum, they guard the transmission and transfer case from rock damage. Ford front skid plates are designed to bolt on and fit your truck perfectly.
( 1 )
$719.99
For a difference you can hear and feel, Ford Performance Parts 2015-17 Mustang GT Power Pack 2 performance packages should be at the top of your list. Featuring Ford proprietary software and engineering, with calibrations available for manual and automatic transmissions, these kits allow gear ratio changes up to 4.09:1. Additional features: * GT350 cold air intake * 87mm throttle body with exclusive intake adapter * Open air filter with industry exclusive 50-state legal CARB E.O. * 21 hp and 24 lbs.-ft. peak gains over stock * 40 lbs.-ft. gain at 1500 rpm * Automatic calibrations feature optimized performance shift schedule * Exclusive no-lift shift strategy and enhanced throttle response * 91 octane or higher fuel required
( 28 )
$801.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
