Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Ford Performance Parts Spark Plug Wire Sets
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 705 )
$50.99
—
$92.99
Ford Performance Parts Spark Plugs
Ford Performance Parts has a range of spark plugs to meet your performance needs. Designed for use in engines operated at sustained high rpm or with higher-than-stock cylinder combustion pressures, these plugs are made from quality materials and are designed to provide the spark that you need to fire up your Ford. Depending on the application, features of Ford Performance Parts spark plugs may include: * Available in heat ranges colder than the stock spark plugs * Sold individually and in sets * Pre-gapped at the factory * Offered in a variety of thread sizes * More robust construction for race applications
( 37 )
$56.99
—
$86.99
Ford Performance Parts Oil Pan Gaskets
When you need an oil pan gasket for your high performance Ford engine, why not get the ones designed by the folks who made the engine? These Ford Performance Parts oil pan gaskets are a one-piece design that features rubber sealing material bonded to a solid steel core, for a strong, reliable seal.
( 96 )
$54.99
—
$76.99
Ford Performance Parts Starter Index Plates
Ford Performance Parts starter index plates are metal plates that go between your block and bellhousing. They are designed to position the starter to ensure proper starter drive to flywheel/flexplate ring gear alignment. If you're looking for a starter index plate, look no further. Ford Performance Parts has you covered.
( 29 )
$92.99
Ford Performance Parts Door Sill Plates
Ford Performance Parts door sill plates feature the "Ford Performance" logo to trim your vehicle appropriately. These striking door sill plates are made from durable ABS plastic, and both the right and left door plates are included. They are original equipment on many Fords, so whether you're replacing or just adding to the look of your vehicle, these door sill plates will fit perfectly. Choose the set designed for your particular car or truck.
( 3 )
$98.99
Ford Performance Parts Main Stud and Bolt Kits
Do you need main cap fasteners for your Ford engine? Ford Performance Parts main stud and bolt kits are available for a variety of Ford V8s. Their kits contain all main bolts, studs, washers, and nuts for one block. Secure your main caps the right way with Ford Performance Parts main stud and bolt kits. Note: some bolts and studs are torque-to-yield and must be replaced after each use.
( 1 )
$61.99
—
$62.99
Ford Performance Parts Throwout Bearings
Ford Performance Parts throwout bearings have a heavy-duty self centering bearing design. They last longer than most aftermarket bearings and will fit many applications.
( 25 )
$75.99
Ford Performance Parts High-Volume Oil Pumps
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 46 )
$63.99
—
$80.99
Ford Performance Parts Performance Cylinder Head Gaskets
Ford Performance Parts performance cylinder head gaskets minimize blowout and are available in several sizes and thicknesses to accommodate many Ford applications. From "competition" gaskets with solid metallic cores and wire encased combustion chamber seals to gaskets with pre-flatten copper or steel wire combustion rings, genuine Ford cylinder head gaskets will deliver leak-free performance.
( 29 )
$58.99
—
$90.99
Ford Performance Parts Intake Manifold Gaskets
Ford Performance Parts intake manifold gaskets are a great way to seal your new intake manifold. And why wouldn't they be? Available for a variety of Ford V8 engines, they're from the folks who designed and built your engine to start with. These high performance gaskets are a definite must for people who are serious about performance. Depending on the application, features may include: * Synthetic rubber Print-O-Seal (Fel-Pro) bead around ports for improved sealing * Improved port location that allows mild porting. * Non-stick coating, steel reinforced * Fitments for most single plane intake manifolds (check for port alignment and adequate sealing surface)
( 17 )
$67.99
Ford Performance Parts 8.8 in. Traction-Lok Rebuild Kits
Make your differential perform even better than it did from the factory with Ford Performance Parts 8.8 in. Traction-Lok rebuild kits. They allow you to do the job right and can save you a big chunk of change by rebuilding in lieu of having to do a complete total replacement. Performance to mileage, or a little in between, no one knows how to make your Ford perform better than Ford Performance Parts, so make them your #1 source for performance parts for your Ford vehicle.
( 82 )
$92.99
Ford Performance Parts Transmission Yokes
When performing your transmission swap, don't forget to get the correct yoke for your application. These Ford Performance Parts transmission yokes allow the use of larger-than-stock U-joints for that higher horsepower application.
( 50 )
$73.99
Ford Performance Parts 2024 Mustang 5.0L Engine Covers
Dress up your Gen 4 Coyote crate engine compartment with a 2024 Mustang 5.0L engine cover from Ford Performance Parts. These fuel rail and coil covers are manufactured from plastic with a black/silver finish and a black/red logo. Notes: * Fits 2024 Mustang 5.0L * Fits M-6007-M50D and M-6007-M50DAUTO crate engines * Does not fit Gen 1, 2 or 3 Coyote crate engines
Not Yet Reviewed
$84.99
Ford Performance Parts Thrust Plates
When your cam "walks" in the block, it grinds the cam gear against the face of the block. Ford Performance Parts thrust plates will not only protect your block, they can even free up some extra horsepower.
( 11 )
$58.99
—
$59.99
Ford Performance Parts Ignition Coil Covers
Ford Performance Parts ignition coil covers dress up 5.0L 4V Ti-VCT Coyote and almost any 4.6L/5.4L/5.8L DOHC engines with coil-on-plug ignition systems. They're available in a variety of finishes and logos—for applications from 1996 and up. Let the competition know you're serious about performance!
( 14 )
$56.99
—
$96.99
Ford Performance Parts Clutch Forks
Ford Performance Parts clutch forks are stock replacement clutch release levers. They are made of stamped steel, and feature an attractive, durable zinc dichromate finish that resists rust.
( 16 )
$74.99
Ford Performance Parts Clutch Linkage Upgrade Kits and Accessories
Available in self-adjusting or manually-adjustable kits, Ford Performance Parts clutch linkage upgrade kits and accessories feature billet aluminum construction and heavy-duty clutch cables. They'll provide you with years of smooth operation, while also providing softer pedal pressure and longer clutch life. Available options include: * Beefed-up clutch release forks and heavy-duty self-adjusting high-lubricity polymer-lined clutch cables * Parts required to convert stock non-adjustable clutch cables to fully-adjustable type so you can adjust clutch pedal travel to your driving habits * Adjustable clutch service cables * Some Fox body applications require the 1982 and later self-adjusting quadrant mechanisms (sold separately)
( 55 )
$52.99
—
$69.99
Ford Performance Parts Modular Bellhousing Installation Kits
When doing a clutch swap or transmission repairs on your Ford Modular equipped vehicle, the bellhousing bolts can get rounded off or misplaced. That's where Ford Performance Parts Modular bellhousing installation kits are sure to come in handy. The kits include bolts to mount the bellhousing to the engine block, two starter index plate to bellhousing bolts, and a clutch fork pivot ball stud. All fasteners are plated for corrosion resistance and the bellhousing bolts feature blue thread locker already applied. For all of your Ford parts and accessory needs, pony up with genuine parts from Ford Performance Parts.
( 5 )
$78.99
Ford Performance Parts Timing Chain Sets
Ford Performance Parts timing-chain sets are available for a variety of the company's performance engines. They include rugged, double-row roller chains for excellent performance and reliability. They also feature crank sprockets with nine keyways, which give you nine choices for cam timing--stock, plus four each advanced and retarded settings. Most sprockets are cast iron; however, some sets have steel cam sprockets for extra strength.
( 30 )
$94.99
Ford Performance Parts Pinion Flanges
Designed for use with 1350 U-joint flanges, Ford Performance Parts Cobra pinion flanges are replacements for the original equipment. They will fit all 8.8 in. rear-drive pinions and offer a perfect fit for your Ford. Why would you go anywhere else for "Blue Oval" parts but Ford Performance Parts?
( 10 )
$57.99
—
$72.99
Ford Performance Parts Oil Filter Adapters
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$82.99
Ford Performance Parts 2015-19 Mustang Knuckle To Toe Link Bearing Assemblies
Ford Performance Parts 2015-19 Mustang knuckle-to-toe link bearing assemblies improve handling, especially in "power down" situations. These bearings replace the rubber toe link bushing in the rear knuckle with a Delrin®-lined spherical bearing. They remove suspension compliance with a minimal impact on ride quality.
( 1 )
$80.99
Ford Performance Parts Hood Lift Shocks
So easy—Ford Performance Parts hood lift shocks finish what you started. Simply begin to lift your hood, and the gas struts take over. They're made from lightweight steel and aluminum, powdercoated with a durable black finish, and laser-engraved with the Ford Performance logo, giving your engine bay a clean, professional appearance. Plus, installation is as easy as their operation. They are rated at 90 lbs., with models available for dozens of applications from 2005 and up. Ford Performance Parts lift shocks deliver stress-free support and style to your hood. Note: If your aftermarket hood is lighter than the factory hood, use caution when opening the hood due to the power of the struts.
( 21 )
$89.99
—
$94.99
Ford Performance Parts U-Joint Conversion Kits
Ford Performance Parts U-joint conversion kits allow small and large Ford drivetrain components to be interchanged. These kits consists of a hybrid 1310/1330 series cross, plus caps and locking clips.
( 5 )
$52.99
