Availability
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
Ford Performance Parts intercooler coolant circulation pumps were designed to efficiently keep supercharged Shelby GT500s cool. These electric water pumps circulate water through their supercharger intercoolers and heat exchangers. They include a rubber isolated mounting bracket and can be used in many coolant applications. Cool your Ford with an intercooler coolant circulation pumps; choose the model with options best suited for your vehicle.
( 12 )
$165.99
—
$387.99
Ford Performance Parts has done it again. You can now put the same intake manifold on your Mustang that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. Additional features include: * Includes unique Ford Racing intake badging *O-ring intake gaskets included * Boss 302 Intake Manifold Installation Kit, Part No. M-9444-M50B, is recommended and includes the necessary production components to complete the installation (minor wiring harness modifications required) * Calibration is required to prevent engine damage! * Calibration not included * Boss 302 air inlet tube does not have provisions for aspirator tube hook up common to automatic transmission equipped 2011-14 Mustang GTs
( 19 )
$312.99
Ford Performance Parts high-flow fuel injectors are specifically designed for performance applications. They are offered in a variety of flow rates, with a range of impedances, long or medium lengths, and USCAR or Jetronic/Minitimer-style electrical connectors (adapter kits are sold separately). The injectors work best with air meters with revised calibrations and have been specially trimmed for high-flow rates. Notes: * All injector flow rates are quoted at a delta pressure of 39.15 psi * To convert to a delta pressure of 43.5 psi, multiply flow rate by 1.054
( 44 )
$242.99
—
$610.99
Are you looking for an easy way to add some style to your Ford engine? Look no further than Ford Performance Parts air cleaner assemblies. There are many different styles, shapes, and sizes available to fit everyone's needs. They come round or oval shaped for both single and dual carbureted vehicles, with your choice of finishes and "Cobra," "Ford," or "Mustang" logos. A high-performance filter element and mounting hardware are included. Any way you go, your engine will be sure to look great.
( 33 )
$107.99
—
$164.99
These Ford Performance Parts 4.6L 3-valve performance intake manifolds feature high-flow runners and an open plenum design for maximum flow, while still fitting underneath stock Mustang hoods. They are manufactured from lightweight composite plastic and have been tested up to 20+ psi; perfect for use in forced induction applications. Ford Performance Parts 4.6L 3-valve performance intake manifolds include a set of intake gaskets to complete the installation. Additional technical information: * Works well with Ford Performance M-6550-3V hot rod camshafts, M-6049-N3VPA high performance CNC-ported 3V cylinder heads, and M-9926-3V 62mm throttle bodies * Less heat soak than aluminum intakes * MAP sensor mounting boss for speed-density applications * Calibration required (not included) * Throttle body not included * Does not fit with Ford Performance strut tower braces
( 11 )
$786.99
If you are looking for the right manifold for your 289 or 302, look no further than these single plane intake manifolds from Ford Performance Parts. Features include: * High-rise, short-runner design intake manifold * Cast from 356A aluminum * Designed for 8.2 in. deck height blocks * Tapered ports sized for moderate-flow heads * Standard Holley carb pattern * Un-machined injector bosses * Designed for Windsor-style heads * Slotted holes for addressing decked blocks * 6.00 in. carburetor pad * 4,000-8,000 rpm range
( 12 )
$434.99
Ford Performance Parts fuel pump eccentrics are designed to fit engines equipped with mechanical fuel pumps. They are used on most Ford Performance Parts small block pushrod crate engines. They feature heat-treated steel construction with chrome plated wear surfaces and are available for different size cam sprocket bolts. Features include: * Fit: 289/302/351W small block Ford engines * Used with M-6268-A302 and M-6268-B302 timing chain sprocket sets * Not compatible with stepped-faced timing sprockets originally equipped with two-piece fuel pump eccentrics
( 24 )
$134.99
Ford Performance Parts 289/302 dual plane performance intake manifolds are designed for use on small block engines fitted with production heads and inline valves. They can mount either the stock 4-barrel carburetor or an aftermarket Holley. With their excellent fuel distribution and midrange power band from 1,500 to 6,500 rpm, they're ideal for use on high performance street and mild race applications. Additional features include: * For use with 8.206 in. deck height blocks * Do not fit "Z" or the GT-40 "X" heads
( 9 )
$384.99
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
Ford Performance Parts offers these throttle bodies as stock replacements for 2005-10 Mustang GT applications equipped with 3V, 4.6L engines. After years of wear and work, the throttle body of your Mustang GT can become damaged or broken, inhibiting and altering the amount of air entering your engine. Brand new, direct replacement throttle bodies featuring 55mm dual throttle bodies; they are made using quality materials for durable, reliable performance.
( 12 )
$246.99
Ford Performance Parts Slant-Edge air cleaners are the perfect way to complete your dress-up look in premium Slant-Edge style! The air cleaner lid attaches to a short stud that is screwed into center of the carburetor, and the lid has a threaded boss on the underside. Installation is easy, simply spin into place. With a prominent raised and milled Ford Racing emblem, these Slant-Edge air cleaners will bring your engine look together in head-turning fashion. Features, specs, and parts may include: * Slant-Edge style air cleaner assembly * High-quality diecast aluminum construction * Round shape * Genuine 3 in. Motorcraft air filter element included * Supplied with necessary mounting hardware * Officially Licensed Ford Performance Product
( 3 )
$226.99
—
$309.99
Replace your broken or cracked intake manifold with an updated 1999-2004 Mustang GT 4.6L 2V PI intake from Ford Performance! The factory GT intake manifold had a plastic coolant crossover that eventually cracked over time, causing increased heat and wear to your engine. Ford Performance has now updated this intake manifold with a new runner design and tooling used to bring back a PI intake manifold. One of the largest improvements was to update the gaskets on the intake to more modern integrated O-ring seals for an easy installation without extra gaskets needed. Another major improvement was the change to an all-aluminum coolant crossover with two sensor bungs, which works with multiple applications. All mounting locations are reinforced and have metal threaded inserts for the fuel rail, coil packs, and lower intake plenum, compared to threading into plastic like other aftermarket options. Ford Performance also includes a new 195 degrees thermostat, thermostat gasket, and alternator bracket. Additional details: * Larger bell mouth * Shorter runner * More rounded runner * Deeper plenum * Fits 1999-2004 Power Improvement (PI) heads * Designed for off-road use; can be used on 1996-98 engines with Performance Improvement (PI) heads (custom calibration required) * Additional parts and modifications may be required * Eliminate irritating coolant leaks and ensure the engine in your 1999-2004 Mustang GT is performing as it should
Not Yet Reviewed
$467.99
Ford Performance Parts Hi-Flow throttle bodies provide more air and produce more power than stock throttle bodies, while also providing good drivability and low-speed control. Available in a variety of styles, number and size of venturis, materials and finishes, they are precision-machined to ensure consistency and accept all stock sensors and controls. Depending on application, features include: * All factory sensors installed; no need to tear apart your original throttle body * Calibrated for idle air flow using the same procedure as production throttle bodies * Consistent high flow * Great looks and underhood "bling" * Validation through hundreds of hours of dyno, racing, and street performance driving * All cfm ratings calibrated at 28 in. of water, measured on SuperFlow SF-1020 flow bench
( 22 )
$869.99
Ford Performance Parts 7.3L Super Duty low-profile intake manifolds offer better hood clearance with a straight-out inlet that will fit under an S550, and deliver an increase in horsepower and torque over the stock Godzilla manifold. Built with the latest technologies, the "plug-and-play" manifolds are easy swaps for stock units, they are lightweight, and safe for boost, nitrous, or pretty much any application. Ford Performance Parts 7.3L low-profile intake manifolds utilize the 92mm GT500 throttle body (not included) and custom calibration is required. They are topped with a removable, branded Ford performance plaque.
Not Yet Reviewed
$942.99
Ford Performance Parts Mustang Bullitt throttle bodies can be used on your 2018-19 GT with a 5.0L Coyote engine. Original equipment from the 2019 Bullitt, these throttle bodies include fasteners for an easier install.
( 2 )
$245.99
Ford Performance Parts 2015-17 Mustang GT350 throttle bodies are an original equipment replacement, these 87mm units will also finish your 5.0L engine's upgrade to the GT350 5.2L intake manifold. They include fasteners, and these larger, precision-manufactured GT350 throttle bodies will open up the airflow into your manifold, resulting in added power. Whether you're replacing or upgrading, the place to purchase the perfect power for your Mustang is Ford Performance Parts.
( 3 )
$192.99
Give your engine that custom look with Ford Performance fuel pump block-off plates that easily bolt into place to properly block-off your existing fuel pump hole when upgrading to an inline or in tank design pump on your carbureted Mustang. These steel block-off plates are offered in polished, chrome plated or black crinkle finishes to complement and coordinate with your engine bay accessories. Officially Ford licensed, these fuel pump block-off plates also feature the well-known Ford oval logo engraved on the top.
( 2 )
$13.99
—
$16.99
Add some extra flair to your custom air cleaner by topping it off with Ford Performance air cleaner wing nuts and fasteners. They are made from quality steel and are available in a range of stylish designs and finishes to give your engine a personalized appearance. Select the model you like best!
( 6 )
$16.99
—
$20.99
Ford Performance Parts air filter elements are the same filters as those used in Ford Performance Parts cold air induction kits. Also available for several OE air cleaners, most are constructed from multi-layer high performance cotton gauze that traps more dirt, has less restriction than traditional paper filters, and are cleanable and reusable. Ford Performance Parts air filter elements make sure your engine gets plenty of clean air to keep it running strong.
( 30 )
$94.99
—
$106.99
Ford Performance Parts' OEM throttle bodies from the 2020-22 Mustang GT500s are also offered for fitment on their 7.3L Super Duty low-profile intake manifold. These 92mm bodies include hardware.
Not Yet Reviewed
$472.99
Ford Performance intake plenum spacer kits are CNC-machined from Westinghouse Type C phenolic material. These spacers fit between the upper and lower intake manifold to help dissipate heat and significantly increase performance. Mounting hardware is included. They are available to fit stock pushrod 5.0L Mustang GTs and for Ford Performance Cobra intake manifolds.
( 13 )
$77.99
—
$97.99
Ford Performance Parts GT350 throttle body adapters are manufactured from billet aluminum and include fasteners. These adapters allow you to mount the GT350 87mm throttle body on the Mustang GT intake manifold.
( 1 )
$116.99
Clean up the look of your engine bay with a "Powered by Ford" engine dress-up kit by Ford Performance! These kits are designed for year-specific Mustang models equipped with a Coyote 5.0L TiVCT engine. The decorative covers hide your fuel rail, injectors, and wiring—and the trim brackets sport attractive "Powered by Ford" lettering. To ensure a finished look under the hood, install a Ford Performance "Powered by Ford" engine dress-up kit! Kit features and parts include: * Fuel rail driver side trim (bracket) * Fuel rail passenger side trim (bracket) * PVC hoses * Necessary hardware to facilitate installation
( 2 )
$154.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
