Availability
Give your Chevy Silverado or GMC Sierra a utility upgrade with a Rockfish rear recovery bumper from Fishbone Offroad. It retains your factory trailer connector, backup sensors, and license plate lights—and provides much-needed steps to allow easy access to your truck bed or utility rack, as well as slots for two 3x3 in. pod lights. Rockfish is perfect for any workhorse or a neighborhood tailgater! Order the model designed to fit your truck. Additional details: * Easy bolt-on design * 3/4 in. D-ring mounts * Works with all OE sensors, brackets, and lights * Black textured 2-stage powdercoat * 1/8 in. steel fabrication with 1/4 in. reinforcements * Built-in step on both sides * Works with most 2 in. tow hitches * Blind spot monitoring system compatible * Dual and single exhaust compatible * Wire tabs welded inside of bumper to retain factory wire routing
( 1 )
$799.99
Give your Chevy/GMC truck a utility upgrade with one of these sturdy Fishbone Offroad front winch bumpers. They accept a winch (up to 12,000 lbs. rating), include interior tabs for wire management, accept standard 3x3 pod lights, and feature a retaining door that allows access to the winch controls. If you decide not to install a winch, there's plenty of space below your grille for accent accessory lights! Whichever way you roll, the black, powdercoated steel of a Fishbone Offroad front bumper will help turn your truck into a workhorse adventure machine with a style that matches!
Not Yet Reviewed
$999.99
—
$1,099.99
Fishbone Offroad offers Pelican front winch bumpers for 2009-14 and 2015-17 (non-Raptor) Ford F-150s. These bumpers are a must-have for any off-road machine adventures. They're fabricated from 3/16 in. cold-rolled steel with a textured black powdercoat—and can house up to a 12,000 lb. winch. The bumpers feature ready-to-paint accent mesh for customization; and include two D-ring mounts that double as steps to help you reach inside the engine bay no matter how high your rig is lifted! Pelican bumpers will also accept up to a 22 in. light bar. Order the model designed to fit your truck!
Not Yet Reviewed
$999.99
Give your Ford Bronco a utility upgrade with one of these Fishbone Offroad Steelhead front bumpers. They feature a bolt-on setup that retains all the factory safety sensors and license plate features without relocation. The bumpers also have provisions for 3/4 in. D-rings and backup LED cubes. So, if you're ready to make a change, but worried about losing safety features, don't compromise. Order a Fishbone Offroad Steelhead front bumper for your Bronco! Additional details: * Fabricated from steel, with a textured black powdercoat * Easy installation * Ready-to-paint aluminum accent mesh * Accepts two 3 in. pod lights * Accepts up to 21 in. light bar
Not Yet Reviewed
$833.74
Give your Chevy Silverado or GMC Sierra a utility upgrade with a Rockfish front winch bumper from Fishbone Offroad. The bumpers retain your factory sensors and also provide provisions for aftermarket LED lights and winch. They're perfect for any workhorse or overlander! These bumpers are fabricated from 1/8 in. steel with 1/4 in. reinforcements, finished in a black textured 2-stage powdercoat. Order the model designed to fit your truck. Additional product details: * LED light mounts * Easy bolt-on design * Tight body fit * 3/4 in. D-ring mounts * Improved approach angle and added tire clearance * Winch compatible (10 x 4.5 in. mounting pattern) * Works with all OE sensors * All hardware Included * Wire tabs welded inside of bumper to retain factory wire routing
Not Yet Reviewed
$999.99
njmnjkmGive your Ford truck a utility upgrade with one of these sturdy Fishbone Offroad Pelican front bumpers. They offer a variety of setups, whether a 12,000 lbs. winch is your thing or retaining some of the factory components is more your style. Whichever way you roll, the black, powdercoated steel of a Fishbone Offroad Pelican front bumper will help turn your truck into a workhorse adventure machine with a style that matches. Depending on the application, features may include: * Ready-to-paint accent hex mesh * Winch compatibility * Light bar compatibility * Factory sensor compatibility * Factory fog light compatibility * D-ring mounts
Not Yet Reviewed
$999.99
Fishbone Offroad rear bumpers are ready for anything you can throw at them. Features include: * Made from steel * Black textured powdercoat * 2 in. accessory receiver * Welded shackle recovery points * Welded D-ring shackles with D-rings
( 2 )
$799.99
—
$899.99
Fishbone Offroad full width bumpers protect the front of your Jeep. Each of the bumpers are built from strong steel and finished with a textured black powdercoat for added durability and lasting good looks. Fishbone offers different styles that accept your OE fog lights, or that includes LED lights. All feature a recessed winch plate to keep air moving across your grill, 2 in. diameter raised tube winch guards or full grill guard, and D-rings so you're ready for the trails. Fishbone Offroad ships these bumpers with all necessary hardware to install them.
Not Yet Reviewed
$789.99
Fishbone Offroad front winch Bullhead bumpers are ready to charge the trails! These bumpers are made from 3/16 in. steel, covered with a textured black powdercoat, and include Grade 8 mounting hardware and extended mounting plates for maximum strength and durability. The Bullhead bumpers are winch-ready, and feature power cable access holes for a clean installation. Fishbone Offroad front winch Bullhead bumper features include: * Fits 1984 to 2001 XJ Cherokees * Recessed winch mount design * Includes two D-rings * Bullhead front bumper also available with 2 in. diameter raised grille guard to protect your winch (not included) while on the trail * Note: prices may vary depending on Bullhead bumper model
Not Yet Reviewed
$819.99
Fishbone Offroad Mid-Width front bumpers protect your Jeep. Fabricated from steel with a protective powdercoat finish, these bumpers have the design and features to ready your rig for the trails. They're available for dozens of Gladiator and Wrangler applications. Product features include: * 2 in. diameter raised tube winch guard * Recessed winch plate keeps air moving across your grill * Specifically designed to accept your OE fog lights without modification or cutting to your factory lights * Accepts both the halogen and LED versions of the factory fogs * All necessary hardware to install * Two D-rings
Not Yet Reviewed
$819.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
