Availability
Fishbone Offroad's front stubby winch bumper with tube guard is built and ready to attack the trail! The bumper's narrow design hugs the bottom of the grille for tire clearance and allows your tires to hit the obstacle before the bumper. These bumpers are designed so that you can reuse your OE factory fog lights; they're ready to accept a winch and include a fairlead mount. Fishbone bumpers ship to you with all necessary hardware for installation, and they include two D-rings so you're ready to tackle the trails! Fishbone Offroad front stubby bumper with tube guard features: * Durable, steel construction * Black textured powdercoat finish * Fits 2007 to 2018 JK Wrangler, Rubicon, and Unlimited * Fits 2-door and 4-door models * Accepts a winch (sold separately) and includes fairlead mount * Raised tube winch guard * Bumper accepts OE fog lights or 14 in. LED light bar (lights and light bar are not included)
( 1 )
$529.99
—
$679.99
Fishbone Offroad front winch Bullhead bumpers are ready to charge the trails! These bumpers are made from 3/16 in. steel, covered with a textured black powdercoat, and include Grade 8 mounting hardware and extended mounting plates for maximum strength and durability. The Bullhead bumpers are winch-ready, and feature power cable access holes for a clean installation. Fishbone Offroad front winch Bullhead bumper features include: * Fits 1984 to 2001 XJ Cherokees * Recessed winch mount design * Includes two D-rings * Bullhead front bumper also available with 2 in. diameter raised grille guard to protect your winch (not included) while on the trail * Note: prices may vary depending on Bullhead bumper model
Not Yet Reviewed
$639.99
—
$819.99
Give your Chevy Silverado or GMC Sierra a utility upgrade with a Rockfish rear recovery bumper from Fishbone Offroad. It retains your factory trailer connector, backup sensors, and license plate lights—and provides much-needed steps to allow easy access to your truck bed or utility rack, as well as slots for two 3x3 in. pod lights. Rockfish is perfect for any workhorse or a neighborhood tailgater! Order the model designed to fit your truck. Additional details: * Easy bolt-on design * 3/4 in. D-ring mounts * Works with all OE sensors, brackets, and lights * Black textured 2-stage powdercoat * 1/8 in. steel fabrication with 1/4 in. reinforcements * Built-in step on both sides * Works with most 2 in. tow hitches * Blind spot monitoring system compatible * Dual and single exhaust compatible * Wire tabs welded inside of bumper to retain factory wire routing
( 1 )
$799.99
Give your truck a utility upgrade with one of these sturdy Fishbone Offroad rear recovery bumpers. They retain your factory trailer connector, backup sensors, and license plate lights, while also providing much needed steps for easy access to your truck bed or utility rack. Fabricated from steel with a textured black, powdercoat, Fishbone Offroad rear recovery bumpers are perfect for any workhorse--or even a neighborhood tailgater with its featured bottle opener! Order the model designed to fit your truck!
Not Yet Reviewed
$699.99
If you're looking to get a winch for your new Toyota Tacoma, while retaining the stock aesthetic, then look no further! The center stubby bumpers from Fishbone Offroad add a mounting plate for your favorite winch, alongside two cube lights, without the bulk of full bumper/grille aftermarket replacements. The bumper completely houses your winch, shielding it from Mother Nature--and even adds a much-needed initial skid plate and paintable mesh accents! Additional details: * Cutting/Removing of the body is required * All hardware needed is included * Features ready-to-paint insertable hex-meshes * Allows more airflow to your trans and steering coolers * Hides and protects your winch and line * Perfect housing for accent lights * Accepts up to a 12,000 lb. winch * Accepts two 3 in. x3 in. cube (pod) LED lights
Not Yet Reviewed
$649.99
Fishbone Offroad Mako rear bumpers are ready for the trail and everyday usage. They tuck up nicely against the back of your Jeep and follow around the corner of the body to give you some corner protection for the trail. These rear bumpers are fabricated from 3/16 in. steel with a black powdercoat finish. Mako bumpers are available for dozens of Gladiator and Wrangler applications. Models are available with or without a winch mount. Additional product features: * Works with an OE or aftermarket hitch * Backup sensor compatible and has pre-drilled holes to accept the sensors * If you don't have the sensors, plugs are included to fill the holes and finish the bumper * All necessary hardware to install * Equipped with two D-rings
( 1 )
$577.36
—
$669.99
Give your Ford Bronco a utility upgrade with one of these Fishbone Offroad Steelhead rear bumpers. They feature a bolt-on setup that retains all the factory safety sensors and license plate features without relocation. The bumpers also have provisions for 3/4 in. D-rings and backup LED cubes. So, if you're ready to make a change, but worried about losing safety features, don't compromise. Order a Fishbone Offroad Steelhead rear bumper for your Bronco! Other features include: * Fabricated from steel, with a textured black powdercoat * Easy installation * Ready-to-paint aluminum accent mesh
Not Yet Reviewed
$749.99
Fishbone Offroad rear bumpers are ready for anything you can throw at them. Features include: * Made from steel * Black textured powdercoat * 2 in. accessory receiver * Welded shackle recovery points * Welded D-ring shackles with D-rings
( 2 )
$747.62
—
$799.99
Fishbone Offroad full width bumpers protect the front of your Jeep. Each of the bumpers are built from strong steel and finished with a textured black powdercoat for added durability and lasting good looks. Fishbone offers different styles that accept your OE fog lights, or that includes LED lights. All feature a recessed winch plate to keep air moving across your grill, 2 in. diameter raised tube winch guards or full grill guard, and D-rings so you're ready for the trails. Fishbone Offroad ships these bumpers with all necessary hardware to install them.
Not Yet Reviewed
$789.99
Fishbone Offroad Manowar front bumpers ready your Jeep for anything. They're made from 3/16 in. steel and covered with a textured black powdercoating. They will accept a winch and have provisions for your OE fog lights. The Manowar bumper includes D-rings and all necessary hardware to properly install it. Features may include: * Accepts a winch and includes fairlead mount * Bumper accepts OE fog lights (lights are not included) * Includes two D-rings * 1 3/4 in. tube grille guard protects the front of Jeep
Not Yet Reviewed
$587.99
Fishbone Offroad rear Bullhead bumpers are ready for the trail and every day usage. They are made from 3/16 in. steel and powdercoated black. The bumpers tuck up nicely against the back of your Jeep offering a great departure angle when you are off-road. Fishbone Bullhead bumpers include integrated 2 in. receivers for off-road, D-rings, and ships with all necessary hardware, including nut strips to make the installation easier.
( 1 )
$584.99
Fishbone Offroad Mid-Width front bumpers protect your Jeep. Fabricated from steel with a protective powdercoat finish, these bumpers have the design and features to ready your rig for the trails. They're available for dozens of Gladiator and Wrangler applications. Product features include: * 2 in. diameter raised tube winch guard * Recessed winch plate keeps air moving across your grill * Specifically designed to accept your OE fog lights without modification or cutting to your factory lights * Accepts both the halogen and LED versions of the factory fogs * All necessary hardware to install * Two D-rings
Not Yet Reviewed
$819.99
Fishbone Offroad Mako front bumpers protect your Jeep. Fabricated from steel with a protective powdercoat finish, these bumpers have the design and features to ready your rig for the trails. They're available for dozens of Gladiator and Wrangler applications. Additional product features: * Fit snugly on your Jeep for a great approach angle when off-roading * Specifically designed to accept your OE fog lights without modification or cutting to your factory lights * Accepts both the halogen and LED versions of the factory fogs * All necessary hardware to install * Two D-rings
Not Yet Reviewed
$724.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
