Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Enginetech Cam Bearings
Enginetech offers cam bearings for a variety of applications, including many Chevy small block V8 engines from the 1960s, '70s, '80s, and '90s. Enginetech camshaft bearings are manufactured as a "full round" design. They're produced from extruded steel tubes with a centrifugally cast Babbitt lining. Several different grades of Babbitt are used depending on the application. Engines with inherent OE problems of bearing wiping and/or fatiguing utilize a high-grade ASTM-14 material. Order the replacement set recommended for your engine.
Not Yet Reviewed
$20.99
—
$26.99
Enginetech Piston Ring Sets
Enginetech piston ring sets are produced with only the best materials and quality assurance testing is conducted to ensure quality for customers. They offer a variety of ring sets to choose from. Select a set preferred for your application. Additional features: * Barrel face, taper face, positive twist, reverse twist, and Napier face designs, among others are used where required * Numerous ring face coatings are available depending on the application, and include plasma moly, chrome, and stainless steel * Compression rings are made from the highest quality gray iron, ductile iron, and high strength steel * Oil ring expanders are designed for ease of installation to prevent overlap during assembly
Not Yet Reviewed
$25.99
—
$49.99
Enginetech Engine Expansion Plug Kits
Enginetech offers engine expansion plug kits for a variety of car, truck, SUV, high performance, and marine applications. Machined from brass or steel, the kits include a variety of sizes to seal whatever ports need to be closed off. The plugs are produced in accordance with factory specs to ensure proper fit and performance. They meet or exceed OE quality standards. Order the kit recommended for your engine. Expansion plugs (or freeze plugs) serve two primary purposes: to block coolant leaks from internal passages, and to protect the engine block from cracking if the coolant inside freezes and expands. The plugs are designed to "pop out" under the pressure of expanding ice, preventing more severe damage, like a cracked block.
Not Yet Reviewed
$21.99
—
$43.99
Enginetech Rebuilders Valves
For about the same cost of reclaiming valves, you can install brand new Enginetech Rebuilders valves. The purpose of these patented Enginetech Rebuilders valves is to help simplify engine rebuilding by salvaging worn cylinder heads and reducing the need for expensive parts like valve seats and springs. Designed with oversized heads and stems, and a lowered keeper groove, these specialized valves create a more efficient and cost-effective rebuild process. The Enginetech one-piece intake valves are made from HNV-3 high alloy valve steel (often used for exhaust valves). All of the valve stems are either triple chrome plated or gas nitrided. Enginetech even goes a step further and hardens every valve tip to 50HRC minimum. The Enginetech exhaust valves are also a one-piece design. All Rebuilder's exhaust valves are made from EV-8 or EV-12 stainless steel. Again, like their intake valves, all stems are triple chrome plated or gas nitrided. Wafer tips, hardened to 50RHc, are inertia welded to every tip. Select the valves you need for your engine rebuild.
Not Yet Reviewed
$20.99
—
$44.99
Enginetech Rod Bearings
Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$21.99
—
$49.99
Enginetech Main Bearings
Enginetech main bearings are made of high-quality alloys, based on the application requirement. Manufactured on state-of-the-art equipment, this ensures consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, guaranteeing they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. Thrust washers are included, where appropriate, when they are not already molded into the main bearing. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech main bearings provide extra protection and better durability within your rebuild. Select the size needed.
Not Yet Reviewed
$28.99
—
$49.99
Enginetech Piston and Ring Kits
Enginetech offers piston and ring kits for a variety of applications, including select Chevy and Ford engines from the 1960s, '70s, '80s, and '90s. The replacement pistons are available in dish or flat top style, in cast or forged aluminum. The rings serve multiple purposes: Sealing the combustion chamber; regulating oil consumption; transferring heat away from the piston into the cylinder wall; and maintaining compression for engine power and efficiency. Order the set recommended for your engine.
Not Yet Reviewed
$27.99
Enginetech Timing Cover Gaskets
Enginetech offers many timing cover gaskets to go with their timing sets—all made with Fire Seal technology. They are individually cut from the right materials and with the right thickness for each application. Unlike OE designs, the superior design and materials work better for and on rebuilt engines, making them ideal for rebuilders. Order the timing cover gasket set needed for your vehicle's engine.
Not Yet Reviewed
$44.99
Enginetech Oil Pumps
The oil pump is a critical component of the internal combustion engine. Enginetech oil pumps are designed to meet or exceed OEM performance with the correct flow and maximum pressure control for each application. Each one is 100 percent cycle tested for both volume and pressure, as well as providing the quality and reliability that precision engine builders require. Enginetech offers pumps for popular and many hard-to-find applications, meeting the rebuilder's requirements for quality and performance. In addition to standard volume pumps, they also offer high-volume/high-pressure versions. Select the oil pump designed for your vehicle.
Not Yet Reviewed
$39.99
—
$46.99
Enginetech Hydraulic Lifters and Lash Adjusters
Lifters play a vital role in keeping your rebuilt engine running properly. Enginetech hydraulic lifters and lash adjusters are made to OEM quality and specifications, and designed with the needs of the engine builder in mind. They go through a strict QC process to provide you peace of mind during your rebuild. Enginetech lifters are hermetically sealed to prevent contamination, are presoaked to save you prep time, and conveniently packaged in different quantities for easy ordering. Choose what you need today.
Not Yet Reviewed
$36.99
