Availability
Engine Works offers SFI-approved flexplates for a wide range of applications from the 1950s and up. These steel replacements are available in one- or two-piece rear main seal styles, internal or external balanced. The flexplates are designed to factory specs to ensure proper fitment and exceptional performance.
Not Yet Reviewed
$62.46
—
$74.96
Engine Works deep transmission pans offer multiple benefits for race and street use. In addition to more fluid capacity, aluminum dissipates heat, and is stronger than steel alternatives. Spacer bolts and hardware are included with each transmission pan model. Order the pan for your application needs.
( 1 )
$112.46
—
$137.46
Engine Works offers lightweight fuel pump pushrods for a variety of applications, including many Chevy small block and big block engines from the 1950s and up. They feature a tubular design with one hardened steel end and one bronze end for use on all aftermarket camshafts. Aluminum rods with brass tips are also available. Select from models designed for use with cast iron or billet steel roller cams.
Not Yet Reviewed
$24.96
—
$29.96
Engine Works offers fuel bowl gaskets for a variety of carburetors, including Holley 4150, 4160, and 4500 models. The gaskets are made from blue non-stick reusable fiber. They're available individually or in multi-packs. Order the seals designed to fit your application.
( 1 )
$2.49
—
$14.06
Engine Works LS Series valves are offered in OE and Performance styles for intake and exhaust. Made from stainless steel, the Performance valves are swirl polished and have an undercut stem, and the OE intake valves are black nitrided. Choose the proper size intake or exhaust valves for your application.
( 2 )
$4.96
—
$9.61
Engine Works offers billet timing pointers for a variety of applications, including many Chevrolet SBC engines from the 1950s through the early 2000s. These replacements are designed to hug the damper so it's easier to line up the damper and pointer for more accurate timing. Additional details: * Available for different harmonic balancer diameters * Billet aluminum construction with a black anodized finish * Stainless steel hardware included * Up to 4 degrees of adjustment are possible
( 1 )
$33.71
Engine Works offers overhaul kits for a variety of carburetor models, including Holley 4160, 2300, and 4150. These kits contain all the gaskets and small parts needed to rebuild your carb. The gaskets are available in reusable and non-reusable options.
( 1 )
$33.71
—
$42.46
High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.
Not Yet Reviewed
$42.46
—
$44.96
Get rid of those old fuel bowl floats—and upgrade to a carburetor float from Engine Works! These Nitrophyl carb floats are available for side hung or center hung fuel bowl models to keep your fuel level where it's supposed to be. Order the carb float model recommended for carburetor your application.
Not Yet Reviewed
$13.11
—
$21.21
Engine Works offers Pro SFI-approved flexplates for a variety of applications, including many Chevrolet small block and big block engines from the 1950s,'60s, '70s, and '80s. These 2-piece replacements are ideal for racing, thicker than stock and double-welded with a forged one-piece ring gear. Precision-machined from premium A36 steel plate material, the SFI 29.1 rated flexplates are much stronger than the factory originals and able to handle high-RPM usage. Order the model recommended for your vehicle.
Not Yet Reviewed
$96.21
Engine Works presents their lineup of mechanical gauges, offering versatility and precision for every automotive enthusiast. These mechanical gauges feature various face colors and psi ranges, along with silver or black bezels, in liquid-filled or dry versions to seamlessly blend style with functionality. Engine Works ensures accurate, reliable readings, making them the ideal choice for those who want performance and style in equal measure.
Not Yet Reviewed
$16.21
—
$26.21
Engine Works freeze plug sets are offered in brass or steel options for a range of engine applications. Each kit will include water jacket plugs, cam plug, oil galley plugs, and pipe plugs. Choose the set designed for your engine.
Not Yet Reviewed
$14.99
—
$19.96
Engine Works offers many air/fuel carburetor gaskets to keep your carb performing at optimum levels. Their metering block gaskets feature blue non-stick fiber construction and are reusable. Available in different quantities for several carburetor applications, choose the style and quantity needed.
( 1 )
$9.06
—
$15.31
Engine Works offers heavy-duty distributor hold-down clamps for a variety of applications, including many Chevrolet small block and big block performance engines from 1955 and up. The clamps are precision-machined from billet aluminum and are available in multiple color options. Installation hardware is included. Secure your distributor with HD hold-downs from Engine Works!
Not Yet Reviewed
$18.71
Engine Works fire boots are the cure for spark plug wire failure in high heat environments, withstanding up to 1,200 degrees F. Their universal size and shape fits most boots, even 90 degree styles. The slip-on fire boots are available in multiple lengths, colors, and quantities.
Not Yet Reviewed
$39.96
—
$41.29
Engine Works carburetor feed lines are a great addition to any fuel system to clean up your engine compartment and properly deliver fuel to your carburetor. The stainless braided hose is rated at 1,000 psi and is impervious to fuels and will withstand temperatures up to 300 degrees F. Make plumbing your carburetor a simple job by choosing Engine Works carburetor feed lines. Order the model designed for your application needs.
Not Yet Reviewed
$61.81
—
$70.06
Engine Works offers intake manifold gasket sets for a variety of applications, including many Ford small block V8s from the early 1960 and up. Constructed from premium fiber material blended with multiple elastomer layers, these replacement gaskets deliver a snug, fluid-resistant seal. Engine Works is synonymous with top-tier automotive solutions, catering to the needs of racers and engine builders alike. Order the gaskets designed to fit your vehicle.
Not Yet Reviewed
$23.71
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
Not Yet Reviewed
$21.86
Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995, and when you are ready to plumb your vehicle, Engine Works aluminum AN fittings will do the job with professional looking results. Engine Works hose ends are crafted from aluminum and finished with a durable red/blue or black anodized finish. They are available in AN sizes 4 to 12 and in straight, 45-degree, or 90-degree styles. Assemble your hoses with help from Engine Works.
Not Yet Reviewed
$5.16
—
$12.36
Engine Works offers timing cover gaskets for a wide range of applications, including many Chevrolet and Ford small block and big block V8 engines from 1955 and up. These replacements are available in different materials, such as rubber-coated fiber or embossed copper. They are the working fluid seal between the timing cover and the engine block, preventing contaminants from the gear shaft area. Ensure a leak-free seal with a new timing cover gasket from Engine Works.
Not Yet Reviewed
$12.46
—
$13.71
Engine Works carburetor mounting gaskets are engineered to exacting standards with proprietary design and are available in applications for fitment on a wide range of carburetor flanges. Each premium-quality gasket is manufactured with application-specific materials to ensure a perfect fit and correct operation for unsurpassed quality that you can trust. Order the carb gasket design and the mounting options that best suit your make/model.
( 1 )
$1.88
—
$17.46
Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.
Not Yet Reviewed
$17.46
—
$73.71
Engine Works offers a variety of high performance starters, including racing, premium, and ultra-high performance models. They feature 3 hp or 4 hp motors, heavy-duty solenoids, and other options. The starters include different styles and mounting choices. Order the model recommended for your year/make and engine application.
Not Yet Reviewed
$246.21
Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available in a variety of lengths and thread sizes. Sold in sets of 16. Singles are also available. Order the studs recommended for your vehicle and engine application.
Not Yet Reviewed
$31.24
—
$41.21
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
