Availability
Engine Works offers SFI-approved flexplates for a wide range of applications from the 1950s and up. These steel replacements are available in one- or two-piece rear main seal styles, internal or external balanced. The flexplates are designed to factory specs to ensure proper fitment and exceptional performance.
( 2 )
$62.46
—
$74.96
Engine Works offers lightweight fuel pump pushrods for a variety of applications, including many Chevy small block and big block engines from the 1950s and up. They feature a tubular design with one hardened steel end and one bronze end for use on all aftermarket camshafts. Aluminum rods with brass tips are also available. Select from models designed for use with cast iron or billet steel roller cams.
Not Yet Reviewed
$24.96
—
$29.96
High-tensile strength head bolt kits are a necessity with any performance engine build and Engine Works offers a broad selection of head bolt kits to help you complete your cylinder head installation. These head bolt kits contain strong, high-quality steel bolts with a high-tensile strength much higher than OE bolts. Order the bolt kit designed for your application needs.
Not Yet Reviewed
$44.96
Engine Works deep transmission pans offer multiple benefits for race and street use. In addition to more fluid capacity, aluminum dissipates heat, and is stronger than steel alternatives. Spacer bolts and hardware are included with each transmission pan model. Order the pan for your application needs.
( 1 )
$112.46
—
$137.46
Engine Works offers lifters for a variety of applications, including many Chevrolet big block and small block V8 engines from 1955 and up. The replacements are available in hydraulic roller or flat tappet styles. These components sit between the camshaft and the cylinder valves. As the camshaft moves over the top of the lifter, it actuates, temporarily opening the valve. And because the intake and exhaust valve need to open at different times, each has its own separate lifter. Order the set recommended for your engine.
Not Yet Reviewed
$91.21
—
$137.46
Engine Works LS Series valves are offered in OE and Performance styles for intake and exhaust. Made from stainless steel, the Performance valves are swirl polished and have an undercut stem, and the OE intake valves are black nitrided. Choose the proper size intake or exhaust valves for your application.
( 4 )
$4.96
—
$11.86
Engine Works offers billet timing pointers for a variety of applications, including many Chevrolet SBC engines from the 1950s through the early 2000s. These replacements are designed to hug the damper so it's easier to line up the damper and pointer for more accurate timing. Additional details: * Available for different harmonic balancer diameters * Billet aluminum construction with a black anodized finish * Stainless steel hardware included * Up to 4 degrees of adjustment are possible
( 1 )
$33.71
Engine Works offers heavy-duty distributor hold-down clamps for a variety of applications, including many Chevrolet small block and big block performance engines from 1955 and up. The clamps are precision-machined from billet aluminum and are available in multiple color options. Installation hardware is included. Secure your distributor with HD hold-downs from Engine Works!
Not Yet Reviewed
$18.71
Engine Works offers Pro SFI-approved flexplates for a variety of applications, including many Chevrolet small block and big block engines from the 1950s,'60s, '70s, and '80s. These 2-piece replacements are ideal for racing, thicker than stock and double-welded with a forged one-piece ring gear. Precision-machined from premium A36 steel plate material, the SFI 29.1 rated flexplates are much stronger than the factory originals and able to handle high-RPM usage. Order the model recommended for your vehicle.
( 1 )
$96.21
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
Not Yet Reviewed
$21.86
Engine Works freeze plug sets are offered in brass or steel options for a range of engine applications. Each kit will include water jacket plugs, cam plug, oil galley plugs, and pipe plugs. Choose the set designed for your engine.
Not Yet Reviewed
$18.24
—
$19.96
Engine Works rod bearing sets are quality bearing sets available in various series and clearances. Offered in bi-metal or Alecular tri-metal construction, these rod bearing sets also come in a variety of clearance options from standard through .030 in., with a .001 in. X-clearance available on some sets. When you want high-quality and high-value parts for your performance vehicle, Engine Works delivers. Check availability and order the set recommended for your ride.
Not Yet Reviewed
$17.46
—
$73.71
Engine Works offers timing covers in a variety of styles for many Chevy and Ford engine applications. The one- or two-piece covers are available in stamped steel or diecast aluminum—in multiple finishes. These replacements are essential in protecting the timing belt, timing chain, or cam belt of your vehicle from road debris, grime, and gravel. Order the model recommended for your ride.
Not Yet Reviewed
$13.11
—
$137.46
Engine Works offers timing cover gaskets for a wide range of applications, including many Chevrolet and Ford small block and big block V8 engines from 1955 and up. These replacements are available in different materials, such as rubber-coated fiber or embossed copper. They are the working fluid seal between the timing cover and the engine block, preventing contaminants from the gear shaft area. Ensure a leak-free seal with a new timing cover gasket from Engine Works.
Not Yet Reviewed
$9.96
—
$13.71
Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available in a variety of lengths and thread sizes. Sold in sets of 16. Singles are also available. Order the studs recommended for your vehicle and engine application.
Not Yet Reviewed
$31.24
—
$43.71
Engine Works bellhousing dowel pins are a must for easier alignment when installing the bellhousing on your engine block. The dowel pins contribute to fewer shifter problems and maximum life for your bearings and transmission. They are available in a variety of sizes and offsets. Order the pair of engine Works bellhousing dowel pins recommended for your vehicle's application.
Not Yet Reviewed
$14.49
Engine Works offers camshaft locking plates to keep your cam and timing gear locked securely together. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. Each plate is stamped from cold steel, features bendable tabs to lock the cam bolts in place and is finished in black oxide. Kit comes with zinc alloy 150,000 psi bolts to lock the cam plate into place after they're torqued to spec. Order the cam locking plate recommended for your make/model.
Not Yet Reviewed
$3.49
—
$28.71
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, Engine Works has got an alternator to help you accomplish your mission. These alternators feature a quality construction and are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run.
Not Yet Reviewed
$149.96
Elevate your vehicle's performance with Engine Works Street Series exhaust valves. Designed to unlock maximum power and efficiency, these top-tier products ensure your vehicle operates at its peak potential. Engineered to thrive under high-speed conditions, this performance upgrade guarantees unparalleled durability and remarkable value for your investment. With Engine Works, you can tackle both the racetrack and everyday streets with unwavering confidence, indulging in a thrilling driving experience like never before.
Not Yet Reviewed
$7.46
—
$10.61
Engine Works offers Ready-to-Run (RTR) race distributors for a wide range of applications—including many Chevrolet big block and small block V8 engines from 1955 and up. As the name implies, these drop-in replacement distributors include a built-in ignition module and connect by means of three wires (power, ground, and coil negative). They feature an aluminum housing, HEI (high energy ignition) in-cap coil, and your choice of cap colors. A very popular choice among street rod and muscle car owners!
Not Yet Reviewed
$272.46
Engine Works offers oil galley plugs for a variety of LS engine applications from 1997 and up. These nylon/plastic plugs help to maintain proper oil pressure. An O-ring seal is included.
Not Yet Reviewed
$4.86
Engine Works offers valve cover gaskets for a wide range of applications—including many Chevrolet and Ford small block and big block engines from 1955 and up. They're available in a variety of materials, thicknesses, and quantities. These replacement gaskets are placed between the engine and valve cover to tightly seal the oil inside the engine body. A worn-out gasket can allow oil to leak into other parts of the engine, causing performance issues. Order the pair or set of 20 designed to fit your vehicle.
Not Yet Reviewed
$18.24
—
$412.46
Engine Works offers thermostat housing gaskets for a variety of applications, including many Chevrolet Gen I engines from the 1950s and up. Ideal for oil pan and water pump sealing, the versatile .030 in. thick gaskets are made with fiber material, bound by high-quality NBR rubber. They're manufactured in accordance with factory specifications to ensure proper fitment and long-lasting performance. Sold in a set of 10.
Not Yet Reviewed
$10.31
Engine Works offers oil filter adapters for a wide range of applications, including many Chevrolet big block and small block engines from the 1950s and up. They're machined from aluminum and designed for spin-on filters.
Not Yet Reviewed
$15.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
