Availability
In 1938, Vic Edelbrock built his first intake manifold so he could get more power from his 1932 Ford roadster. After some modification, his “slingshot” manifold helped...
In 1938, Vic Edelbrock built his first intake manifold so he could get more power from his 1932 Ford roadster. After some modification, his “slingshot” manifold helped his flathead Ford set a new quarter mile record. Word got around about this manifold, leading Edelbrock to go into manufacturing after the end of World War II. As Vic and his successors continued to chase increased performance, his company spread into new markets. Today, Edelbrock is one of the largest producers of aftermarket performance parts in the world. The company continues to develop and manufacture their products in the USA with factories in California...
In 1938, Vic Edelbrock built his first intake manifold so he could get more power from his 1932 Ford roadster. After some modification, his “slingshot” manifold helped his flathead Ford set a new quarter mile record. Word got around about this manifold, leading Edelbrock to go into manufacturing after the end of World War II. As Vic and his successors continued to chase increased performance, his company spread into new markets. Today, Edelbrock is one of the largest producers of aftermarket performance parts in the world. The company continues to develop and manufacture their products in the USA with factories in California and North Carolina.
Edelbrock doesn’t just build classic car parts. Since its inception, the company has continued to develop and release parts for the latest vehicles hitting showrooms. Edelbrock was there during the peak of the hot rod, dragster and muscle car eras, and they continue to lead with parts for the latest engines coming out of Detroit and elsewhere. From Ford flatheads to Subaru boxers, Edelbrock has the parts you need to improve the performance of your vehicle. It even offers components for truck and marine applications. Here are some of the company’s most popular products.
Intake Manifolds: The first thing that comes to mind when you hear Edelbrock is intake manifolds, and for good reason. Edelbrock has been perfecting intake manifold design since the very beginning, using the best tools available. Whether you are looking to improve performance and driveability, towing, all-out high rpm performance, or something in between, Edelbrock has an intake manifold for your engine.
Carburetors: An Edelbrock carburetor isn’t just a great performer. It’s also designed to be easy to tune. Most tasks, including float bowl adjustments and needle swaps, can be done without draining or removing the unit from the engine.
Cylinder Heads: Edelbrock added cylinder heads to their product offerings in 1986. The company has built a reputation for offering heads that deliver great performance at a low price for street cars, as well as high performance heads that can keep up with demanding race applications. Its various lines help engines generate the right balance between a street friendly torque curve and high rpm racing performance.
Fuel Injection Kits: Edelbrock introduced the first aftermarket fuel injection kit in 1979. Over the years, it has remained the leader in these kits, offering an easy way for tuners to add the drivability and power benefits of EFI to classic engines. The company’s new ECU also can control the distributor and cooling fans, giving your classic motor the same tunability as a modern factory powerplant. Thanks to Bluetooth compatibility, you can tune your fuel delivery and ignition curve from a smartphone app.
Top End Kits: Does figuring out which performance upgrades go together give you a headache? Edelbrock takes the guesswork out of performance improvements with its range of top end kits. These kits include carburetors, intake manifolds and heads that are designed and tested to deliver proven performance when used together.
Superchargers: Thanks to their high efficiency superchargers, Edelbrock supercharger kits deliver maximum power at low boost. This makes them ideal for street applications, as they require little or no modification to the engine’s internals. Edelbrock makes kits for specific applications that include everything you need for installation. The company also offers general purpose kits built around popular engines that can be modified to fit the vehicle.
Valve Covers: Edelbrock makes a selection of contemporary and classic valve cover designs borrowing from its motorsport heritage. These valve covers give your motor the custom look you want with the space you need for a high performance valve train.
Showing In Stock Items. Show All 44 Items.
Edelbrock Victor EFI 4-barrel throttle bodies are the perfect high-quality, satin finished complement for fuel injection systems based on Victor EFI intake manifolds. They also make affordably priced replacements for similar throttle bodies. These units include four 1.75 in. throttle bores for a 1,000 cfm flow rating. The base flange will fit most of the Edelbrock Victor and Pro-Flo 4-style manifolds (or other similar manifolds with comparable square-bore carburetor flange and standard bolt spacing). These Edelbrock-designed throttle bodies are diecast and fully machined with high-quality components. Get your thrill on running wide-open with Edelbrock Victor EFI 4-barrel throttle bodies! Features, notes, and specs: * Will accept standard air cleaners with 5 1/8 in. flange * Assembly includes Delphi/GM 4-pin stepper-style idle air control (IAC) motor with GM-style 3-pin throttle position sensor (TPS) and 1-bar GM MAP sensor * Multiple vacuum take-offs (front 3/8 and 1/4; rear 3/8, 1/4, and 3/16—plus another 3/16 on the passenger side) * MAP sensor mounting location incorporated on housing * Precision throttle control provided by progressive linkage with provisions for 700R4-style throttle valve cable * 2.53 in. measurement from base flange to air cleaner flange
( 5 )
$486.95
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1470 )
$414.95
—
$590.95
Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
( 829 )
$394.95
—
$619.95
Designed and calibrated from Edelbrock for use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are protected by a Chromate conversion coating which is used as a corrosion inhibitor. Other features include modified bowl venting, specially designed throttle shafts, an accelerator pump seal, a 3/8 in. inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, a 5 1/8 in. flame arrestor flange, a universal throttle lever, and revised secondaries for improved transient performance. Also included with every Edelbrock carburetor are instructions for installation, set up, and basic tuning.
( 71 )
$621.95
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
—
$1,047.95
Edelbrock heat insulator gaskets are designed to help prevent fuel percolation in Performer series carburetors exposed to extreme underhood temperatures. They are available in both open and ported styles, and come complete with extended-length carburetor studs.
( 231 )
$32.95
—
$33.95
Mount your carburetor the right way with these base gaskets from Edelbrock. They ensure a positive, leak-free seal between your carburetor and manifold surfaces.
( 50 )
$17.95
—
$38.95
These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
( 206 )
$18.95
—
$119.95
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
( 359 )
$44.95
—
$92.95
Edelbrock Q-Jet Airhorn gasket sets are for the Edelbrock and GM Rochester Quadrajet carburetors. They are made from the same high-grade gasket material that Edelbrock uses for its new carburetor gaskets to ensure a proper seal on your Q-Jet!
( 4 )
$39.95
—
$49.95
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$663.95
$425.95
—
$801.95
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$482.95
$339.95
—
$540.95
Edelbrock Ford flathead intake manifolds are designed to give your flathead engine more power. They are made of aluminum and feature a natural finish. The intakes are available for dual carburetor 1938-48 engines or in a single 4-barrel version for 1949-53 engines.
( 1 )
$519.95
—
$703.95
If you want to build a carbureted LS3 engine. Edelbrock's Performer RPM LS3 intake manifolds afford you that opportunity. Originally computer-controlled engines, you can top your LS3 with one of these Performer RPM manifolds and a carburetor to gain maximum power and a broad torque curve. They include provisions for a timing control module, passages for clean-look wiring, and a special throttle/transmission bracket to make these units an easy retro-fit. Go carbureted with Edelbrock Performer RPM LS3 intake manifolds.
( 1 )
$422.95
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$1,017.95
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$1,297.95
$432.95
—
$1,038.36
Edelbrock Victor Series air cleaners feature a die-cast aluminum lid that is black powdercoated with a finely textured surface for a pleasing and unique appearance. This is the same finish that you'll find on Edelbrock's other new Victor Series accessories. These air cleaners will work with all popular 5 1/8 in. carburetors or 4-barrel throttle bodies and include a knock-out in the base, along with an adapter for crankcase ventilation. They also come with a medical-grade, pre-oiled cotton gauze element for excellent filtration.
( 4 )
$181.95
—
$205.95
These Edelbrock Victor Jr. LS1 carbureted intake manifold packages are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. They include an electronic timing control module that picks up MAP, crank position, and cam position in order to drive the stock coil-on-plug ignition system.
( 1 )
$1,077.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$652.95
$227.95
—
$604.95
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$509.95
—
$845.95
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets and bolts.
( 7 )
$125.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 600 )
$33.95
—
$152.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
