Availability
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1470 )
$517.95
—
$590.95
On Sale
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
$664.76
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$659.95
$509.95
—
$754.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$681.95
$509.95
—
$860.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$514.95
—
$689.95
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$617.95
Performer RPM Dual-Quad intake manifolds are available in two versions, one for small port cast iron factory heads and one for factory large port with Edelbrock's Performer RPM W-Series heads. These manifolds deliver performance improvements in the 1,500 to 6,500 rpm range with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept their dual-quad accessories including fuel lines, throttle linkage, and air cleaners. They include the oil fill tube and matching push-in breather.
( 3 )
$713.95
—
$746.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$652.95
$511.96
—
$604.95
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$540.95
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
Edelbrock Performer manifolds are designed for street 1987-94 Chevy V6s with factory throttle body injection. They provide outstanding throttle response and torque increases. They accept all factory accessories and hardware, and your throttle body stays in its stock location. A computer chip is available at no charge and is street-legal for 4.3L trucks (E.O. #D-215-21). Return the postage-paid card that comes with the manifold to receive the chip from Edelbrock.
( 10 )
$595.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 164 )
$701.50
—
$780.50
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$509.95
—
$595.95
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 42 )
$506.95
—
$514.95
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$782.50
Edelbrock Performer 5.8 EFI aluminum intake manifold bases represent the standard for hot 5.8 Liter performance. Their modular design incorporates the latest airflow technology and CAD programming for maximum power gains. They feature a broad power range and the base manifold is CNC port-matched to the upper manifold for maximum performance.
( 1 )
$549.95
Edelbrock Performer RPM Marine intake manifolds are designed specifically for demanding marine applications. They feature a low-rise, dual-plane design with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and feature brass lined front water crossovers and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion.
( 3 )
$605.95
—
$611.95
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$530.95
—
$708.95
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$638.95
$511.16
Edelbrock Performer Dual-Quad Air-Gap EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator--which are each sold separately.
( 1 )
$779.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
