Availability
Edelbrock Performer carburetor maintenance kits consist of genuine Edelbrock parts to help you rebuild or simply keep your carburetor in top notch condition. They include all of the parts and gaskets necessary to rebuild or modify your Performer carburetor for optimum performance. You put a lot of hard work and effort in your project vehicles. Make sure the parts you use are worthy of the effort and order the Edelbrock Performer carburetor maintenance kit designed for your application.
( 287 )
$58.95
—
$60.95
Edelbrock knows carbs. That's why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
( 201 )
$66.95
—
$96.95
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 114 )
$50.95
—
$69.95
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 174 )
$64.95
—
$117.95
Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Edelbrock single feed fuel line kits are the right choice for your hot rod.
( 376 )
$50.95
—
$53.95
Edelbrock electric chokes kits are designed to give you reliable starting in all weather conditions. The kits include all necessary parts to convert your carburetor into an electric choke operation.
( 117 )
$97.95
—
$132.95
Edelbrock offers E-Series head bolt kits to install one set of cylinder heads. Each bolt kit includes the necessary bolts and washers for your application. E-Series bolts have a yield tensile strength of 190,000 psi for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. These cylinder head bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock "E" stamped into the hex head. Order the E-Series head bolt kit designed for your application needs.
( 5 )
$73.95
—
$115.95
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 23 )
$64.95
—
$82.95
Are you looking for quality fuel lines for your dual-quad setup? These dual-quad fuel line kits from Edelbrock feature two ports to supply fuel to two Edelbrock carbs when used with a dual-quad intake manifold.
( 22 )
$90.95
—
$114.95
Keep your Pro-Flo multi-point EFI systems performing their best with Edelbrock MAP sensors. These Manifold Absolute Pressure sensors are made with high-quality components for durability and dependability, and will have a role in making sure that your engine is fed the right mixture of fuel and air. Hold on to performance by making sure that your ride's computer is getting the right signals with Edelbrock MAP sensors.
( 5 )
$97.95
—
$128.95
Edelbrock pushrod guideplates for Edelbrock heads are made from high-grade alloy steel and hardened to 60 Rockwell "C." These guideplates are available in either a flat or stepped plate style. Stepped plates support the pushrods closer to the rockers, stabilizing them.
( 9 )
$64.95
—
$100.95
Edelbrock universal micro electric fuel pumps are designed to deliver maximum performance in a compact package. They feature a durable, simple design that reduces the chance of vapor lock and flooding. The fuel pumps are easy to install and operate quietly, so you won't know they're there! They include a fuel filter, mounting hardware, and instructions for a hassle-free installation. Order the model with options best suited for your application. Edelbrock universal micro electric fuel pump details: * For use with standard 12 V negative ground systems with 1 amp draw at maximum delivery * Easy to set up 2-wire design * Gravity fed inline, self-priming, and regulating design * Can also be used as a lift or transfer pump * Designed for use with automotive and industrial application
( 72 )
$69.95
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 600 )
$50.95
—
$76.95
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 52 )
$57.95
—
$106.95
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 222 )
$50.95
—
$76.95
Edelbrock's valve spring retainers are made of superior-quality steel, and are machined and heat-treated for strength. They have a black oxide finish for rust and corrosion protection. And when matched with Edelbrock's valve stem lock kits and valve springs, Edelbrock valve spring retainers will give you the reliable valvetrain performance you need for your street rod, daily driver, or competition vehicle.
( 9 )
$92.95
—
$113.95
Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.
( 42 )
$56.95
—
$117.95
Designed to take the guesswork out of carb swaps, these fuel line and filter kits provide a quick, leak-free installation in a matter of minutes. They'll work with all Performer and some other brands of carbs and are available in different forms for a variety of applications.
( 36 )
$50.95
—
$113.95
Edelbrock universal micro electric diesel fuel pumps are designed to deliver maximum performance in a compact package. They feature a durable, simple design that reduces the chance of vapor lock and flooding. The fuel pumps are easy to install and operate quietly, so you won't know they're there! Each pump includes a fuel filter, mounting hardware, and instructions for a hassle-free installation. Edelbrock universal micro electric fuel pump details: * For use with standard 12 V negative ground systems with 1 amp draw at maximum delivery * Easy to set up 2-wire design * Gravity fed inline, self-priming, and regulating design * Can also be used as a lift or transfer pump * Designed for use with automotive and industrial applications
( 4 )
$84.95
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 454 )
$50.95
—
$90.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$58.95
—
$61.95
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air—without the expense of buying a new filter every few thousand miles. They're constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are available in black, red, white, and blue to complement any engine bay. They're also designed with three inlet adapter rings for use on 3 in., 3.5 in., and 4 in. inlet tube systems. Pro-Flo universal conical air filter elements also feature the Edelbrock exclusive Pro-Charge clean strip for easy maintenance. This strip will let you know when it's time to clean your filter.
( 9 )
$69.95
—
$89.95
Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets offer performance and value to replace your OEM wires. They feature high-quality leads that deliver 500 ohms of EMI-RFI noise suppression with low resistance. Ultra-Spark 500 wires are built with superior cores—wrapped with a suppression material, conductive winding, and a layer of latex silicone. That is covered with inner insulation, braid tape, and an 8.5mm silicone outer jacket that won't crack or shrink, and resists chemicals. Why replace when you can upgrade? Treat your daily driver or budget build to Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets.
( 6 )
$61.95
—
$62.95
Edelbrock Max-Fire Ultra-Spark 500 universal spark plug wire sets provide the same value and performance, but with the flexibility to tailor them to fit your V8 application perfectly! They come with pre-installed straight or 90 degree spark plug boots, and include early OEM socket-style and late-style HEI plug distributor terminals to make sure you're covered. The straight boot sets are a Vari-Angle type that allows the boots to be bent and hold their shape in tight areas to clear headers. What a deal! Replace your OEM wires with maximum performance and a custom fit using Edelbrock Max-Fire Ultra-Spark 500 universal spark plug wire sets.
( 3 )
$69.95
—
$71.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
