Availability
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 52 )
$57.95
—
$106.95
Edelbrock Pro-Tuner EFI distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. They have a magnetic crank pickup and use a Hall-Effect pickup with an LED indicator for the camshaft sensor. Their cam sync pickup can be adjusted manually or with EFI Management software. The cam sync has a 12 in. lead with a 3-prong Weatherpack connector. The crank trigger has an 8 in. lead with a 2-prong Weatherpack connector.
( 3 )
$458.95
When you buy that new Max Fire distributor, don't forget a new Edelbrock distributor hold-down clamp. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 23 )
$14.95
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$435.95
—
$489.95
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$90.95
—
$117.95
Edelbrock LS1/LS6 aluminum ignition coil covers are a great, and affordable way to dress up Chevrolet Gen III LS Series engines. They are manufactured from cast aluminum and available in a natural, polished, or black powdercoated finish. These LS1/LS6 coil covers eliminate the need for the factory coil pack bracket by mounting the ignition coil packs directly to the underside of the covers. Install a set of the Edelbrock LS1/LS6 aluminum ignition coil covers and create a clean, custom under the hood look for your ride.
( 5 )
$353.95
—
$492.95
Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets offer performance and value to replace your OEM wires. They feature high-quality leads that deliver 500 ohms of EMI-RFI noise suppression with low resistance. Ultra-Spark 500 wires are built with superior cores—wrapped with a suppression material, conductive winding, and a layer of latex silicone. That is covered with inner insulation, braid tape, and an 8.5mm silicone outer jacket that won't crack or shrink, and resists chemicals. Why replace when you can upgrade? Treat your daily driver or budget build to Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets.
( 6 )
$61.95
—
$62.95
Edelbrock Max-Fire distributor caps are the perfect-fit replacements. Just like the originals, they're molded in high-quality, 30 percent glass-filled polyester for durability and carbon tracking resistance. Available in a choice of styles, the caps include retainer and hardware. For the ignition performance you expect, service your Max-Fire distributor with genuine Edelbrock caps.
Not Yet Reviewed
$45.95
Edelbrock Pro-Flo EFI and Max-Fire bronze distributor gears are designed specifically for Pro-Flo 4 and Max-Fire distributors. These drive gears are an optional replacement part for the iron gears that come installed on the Pro-Flo 4 and Max-Fire distributors. The bronze gears are intended for high performance and race applications which require distributor drive gears that conform to the camshaft gear. This type of gear is designed to be sacrificial and should be inspected regularly and replaced when worn.
Not Yet Reviewed
$60.95
On Sale
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,222.95
$1,100.66
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$33.95
—
$149.95
Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.
Not Yet Reviewed
$469.95
—
$601.95
On Sale
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
$1,691.96
Edelbrock mass airflow sensor kits are the perfect upgrades for any MAFS-equipped vehicle with performance upgrades that have elevated airflow above the range of the stock sensor. They feature a large, 95mm venturi housing that reduces airflow restriction and improves overall horsepower potential. The sensor is manufactured with an injection-molded housing for OEM-level precision with a modern, blade-style element for the latest in technology.
Not Yet Reviewed
$236.95
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$82.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
