Availability
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,266.95
—
$3,239.95
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,645.95
—
$2,986.95
These Edelbrock kits include everything needed to upgrade a carbureted fuel system to a high-pressure EFI system without breaking the bank. These are return-style systems and will complete the fuel system loop by returning the unused fuel to the tank. Edelbrock includes the following parts in these kits: * Universal fuel pump * Regulator * Filter * Russell Twist-Lok hose * Hose ends * Mounting brackets and hardware
( 6 )
$618.95
Edelbrock fuel injectors offer precise, controlled fuel flow for better power, throttle response, and economy. They are available in a number of designs to fit the various Edelbrock fuel injection systems, as well as a wide range of fuel flow rates.
( 14 )
$82.95
—
$884.95
Edelbrock Victor EFI 4-barrel throttle bodies are the perfect high-quality, satin finished complement for fuel injection systems based on Victor EFI intake manifolds. They also make affordably priced replacements for similar throttle bodies. These units include four 1.75 in. throttle bores for a 1,000 cfm flow rating. The base flange will fit most of the Edelbrock Victor and Pro-Flo 4-style manifolds (or other similar manifolds with comparable square-bore carburetor flange and standard bolt spacing). These Edelbrock-designed throttle bodies are diecast and fully machined with high-quality components. Get your thrill on running wide-open with Edelbrock Victor EFI 4-barrel throttle bodies! Features, notes, and specs: * Will accept standard air cleaners with 5 1/8 in. flange * Assembly includes Delphi/GM 4-pin stepper-style idle air control (IAC) motor with GM-style 3-pin throttle position sensor (TPS) and 1-bar GM MAP sensor * Multiple vacuum take-offs (front 3/8 and 1/4; rear 3/8, 1/4, and 3/16—plus another 3/16 on the passenger side) * MAP sensor mounting location incorporated on housing * Precision throttle control provided by progressive linkage with provisions for 700R4-style throttle valve cable * 2.53 in. measurement from base flange to air cleaner flange
( 5 )
$486.95
Automobile engines are a perfect balance of science and mechanical engineering. Each part is designed to interact with the other in perfect harmony to produce a means of transportation. One very small, but very vital component found in this mass orchestra of mechanics is the idle air control valve, or better known to mechanics as the IAC. Edelbrock offers their version, the GM stepper IAC motors, that also includes a valve gasket. The IAC valves adjust the airflow to improve motor idling. The gasket provides a tight seal to avoid a leaky throttle system, which could be a nuisance and also dangerous.
( 1 )
$124.95
These Edelbrock throttle body intake elbows are designed using the latest technology for unbeatable flow and performance. They adapt GM LS1, LS2, and Ford 5.0L based throttle bodies to EFI intake manifolds with a traditional square bore, 4150 type, mounting flange. Edelbrock throttle body intake elbows are available in standard or box-style configurations to fit a wide variety of engine and hood combinations. Cast from high-quality aluminum, the throttle body elbows feature several bore inlet sizes with your choice of natural or black powdercoated finishes.
( 14 )
$183.95
—
$248.95
Edelbrock Victor LS throttle bodies are constructed from billet aluminum and come complete with TPS and IAC, maximizing performance upgrades on all Pro-Flo XT, EFI Victor Elbow, and Gen III and Gen IV engines with cable-driven throttle bodies. With bolt patterns for both LS generations, these enlarged single-bore throttle bodies feature a progressive throttle linkage and parabolic bore design for increased power and enhanced low-speed drivability. A thicker throttle blade eliminates deflection for boosted applications, while a beefed-up linkage and dual-spring mechanism ensure safety and total throttle control.
( 1 )
$329.95
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$137.95
—
$274.95
Edelbrock Super Victor LS3 fuel rail kits are specifically designed to be used with your Super Victor LS3 manifold to give your ride its peak performance. These kits are ideal for helping you build a 700 hp and higher carbureted or EFI large-displacement racing engine, operating between 3,500 and 7,500 rpm. They are exactly what you need when working on nitrous or forced induction applications. So, if you're working on making the perfect LS3 race engine, Edelbrock Super Victor LS3 fuel rail kits are must-haves.
Not Yet Reviewed
$296.95
Edelbrock Pro-Flo XT EFI fuel rail kits are designed for use with your Edelbrock Pro-Flo XT EFI system. Made of high-quality materials, they have a beautiful finish with the Edelbrock Pro-Flo XT logo and hardware is included.
( 1 )
$188.95
—
$226.95
Edelbrock Victor Tunnel Ram fuel rail kits are specifically designed for their Victor Series Tunnel Ram manifolds. They feature a new and improved design with 5.5 sq. in. at the plenum, making them 25 percent larger. They are the ideal fuel rail kits to use with any modern high-horsepower demanding application. Edelbrock Victor Tunnel Ram fuel rail kits are constructed from superior-quality aluminum for long-lasting durability and performance and are anodized black for a beautiful finish.
Not Yet Reviewed
$224.95
Edelbrock aluminum fuel rail stands are CNC-machined from aluminum extrusions and are matched with standard injectors (2.650 in. O-ring spacing) or Pico injectors (1.50 in. O-ring spacing). These fuel rail stands are designed for use with Edelbrock aluminum fuel rails for Edelbrock EFI manifolds.
( 5 )
$52.95
Edelbrock throttle bodies are superior in quality and performance. They are available in several sizes to suit your application. The smaller sizes are the first choice for stock or mildly modified engines. The larger sizes are for more radical engine combinations and require port matching of the manifold to fit, in most cases. All sizes include brand new throttle position sensors that are factory-set and ready to go, right out of the box.
Not Yet Reviewed
$1,220.95
Are you having problems with your new intake accepting your throttle body? Edelbrock throttle body adapters allow you to use either your stock or aftermarket throttle body on Edelbrock intake manifolds.
( 1 )
$31.95
—
$230.95
Edelbrock LS3 1-Bar MAP sensors are designed to fit Chevrolet LS3 applications that use an Edelbrock LS3 XT intake manifold or any other factory-style intake that has a 12mm MAP sensor port hole. These MAP sensors should also replace the 1-bar MAP sensor on factory LS3 applications when an Edelbrock Pro-Flo 4 EFI system has been installed in order to provide a compatible calibration during installation and tuning.
Not Yet Reviewed
$55.95
Edelbrock idle air control motors control idle speed by regulating the flow of air around your throttle plates for proper performance. Edelbrock offers these idle air control motors for a variety of EFI systems. They're constructed from top-quality materials to ensure years of dependable service.
Not Yet Reviewed
$156.95
These Edelbrock Pro-Flo multi-point replacement calibration modules are exact replacements for Pro-Flo fuel injection systems. They are exclusively designed for the Edelbrock Performer RPM Pro-Flo EFI systems. The modules require a cord and adapter in order to hook them up to the electronic control module.
Not Yet Reviewed
$533.95
—
$594.95
Edelbrock fuel injector adapters make it easier to supercharge your vehicle equipped with USCAR injectors. Plug them in and you're accessorized and ready for a performance upgrade. Do you have USCAR injectors? Get Edelbrock fuel injector adapters and harness the power.
Not Yet Reviewed
$137.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
