Availability
Eddie Marine standard flame arrestors are made from aluminum and anodized for corrosion protection. These Barbron arrestors fit standard carburetors with 5 1/8 in. mounting flanges. They meet all U.S. Coast Guard requirements and include fuel tube.
( 6 )
$94.95
Eddie Marine oil drain kits offer the perfect replacement for your stock oil pan drain plug, giving you an easy-access drain for your oil. Run it through your bilge drain or connect an oil pump to the end. The drain end cap is 3/4 in. O.D. and designed to fit through a standard drain hole. Models with 1/2 in.-20 threads will fit most Chevy, Ford, and Olds pans—while the metric model fits some late model Mercruiser engines. Order the thread size and hose length best suited for your application.
( 23 )
$59.95
—
$69.95
Upgrade your exhaust tips with the absolute best flapper design available—Eddie Marine's non-burn exhaust flappers! They're constructed to be installed inside of SS exhaust tips by welding the included mounting pin. These non-burn exhaust flappers represent the ultimate in durability, as well as a finishing touch to your boat's exhaust system. Order the model designed for your pipe diameter.
( 1 )
$68.95
Eddie Marine exhaust block-off plates are made from stainless steel and black Fusioncoated for looks and protection. They're used to block off the exhaust outlet on Mercruiser Bravo Gimal housings, when removing the stock exhaust "Y" pipe for through-transom exhaust applications.
( 1 )
$61.95
Eddie Marine exhaust bends are offered to fabricate custom exhausts, create alternate exhaust routes, and to lower the outlet position of your exhaust. Their 90 degree bends are raw stainless steel available in a choice of O.D.s with legs approximately 10 1/2 in. and 13 1/2 in. long. Their 80 degree and "S" bends (available in three drop lengths) are Fusioncoated stainless steel and accept 4 in. exhaust hose.
( 2 )
$100.95
Adapt to different gas fills with Eddie Marine fuel hose reducers. Decrease the diameter of your fuel hose to fit your fill with these quality-made Eddie Marine reducers.
Not Yet Reviewed
$55.95
Eddie Marine billet throttle cable brackets are machined from one-piece aluminum for strength throughout. These brackets mount on the base of the carburetor. They come with a throttle return spring and hardware, and are available in a polished finish, clear anodized, or Fusion powdercoat color options. The brackets accept 33C cables (sold separately).
( 4 )
$64.95
Eddie Marine billet aluminum water plates shine with a polished finish. They are available for both big block and small blocks, and they feature 1/2 in. NPT threads.
Not Yet Reviewed
$61.95
Eddie Marine remote power outlets offer a solution to opening your hatch when you have a dead battery. Available in white plastic and black plastic, the covers of these outlets open to reveal the two battery posts for easy actuator jump starting. They can be mounted inside a seat base or other inconspicuous location.
( 6 )
$64.00
Eddie Marine Mercruiser shift quadrants are EMI Thunder accessories that help make your installation easy. These shift quadrant/electronic control module brackets relocate your stock shift quadrant assembly and engine control module (ECU) to an EMI Thunder exhaust system. Eddie Marine Mercruiser shift quadrant brackets have a gloss black Fusioncoat finish and include fasteners.
( 1 )
$80.95
Eddie Marine offers swim step brackets to mount your Eddie Marine swim steps. They're 1 1/2 in. wide, 6 in. long against the transom, and extend out 12 in. These stainless steel brackets are available in 12 degree or 16 degree angles, as well as in a bright polished finish or in several powdercoat colors. (Important note: it's imperative to select the correct bracket angle to fit your boat's transom to ensure the step is level to your boat. These are the Eddie Marine swim step mounting brackets only.)
( 4 )
$53.95
Eddie Marine billet aluminum finger-grip grab handles provide a secure balancing point to help passengers and skiers safely board or exit a boat. These contoured bars are available in a variety of lengths and finishes. They mount with two bolts (not included) in blind tapped holes, so no hardware is exposed. Equip your watercraft with plenty of billet grab handles for good looks and steady assurance.
( 2 )
$72.95
—
$92.95
Eddie Marine bulkhead fittings are stainless steel. They are available in several AN sizes and lengths to assist in your marine plumbing needs.
Not Yet Reviewed
$68.95
—
$79.95
Eddie Marine clamp-on exhaust tip flappers are designed to clamp over most exhaust tips. These external flappers are constructed from high-temp rubber and do not use an internal metal plate (which could cause failure). These clamp-on exhaust flappers are available to fit different diameter tips (3 1/2 in. requires slight modification of flap to fit). Tip is not included. Note: To be sure that this particular part will fit, measure the outside diameter of the exhaust tip to determine size needed.
( 5 )
$61.95
Eddie Marine forward-reverse relay boxes are replacements for their trim tabs and can also be used with hatch actuators. By incorporating one of these boxes, the possibility of voltage drop will be eliminated and the actuator will be supplied with a full 12 volts of current at all times, regardless of the length and age of the power supply wires. The boxes contain two relays encapsulated in epoxy for corrosion resistance—and they also allow the use of a single-pole switch to operate reverse polarity actuators, as well as accommodate two actuators simultaneously. Ensure that your actuator will operate at its maximum speed with an Eddie Marine forward-reverse relay box.
( 1 )
$92.00
Eddie Marine bypass Y-fittings assist in converting your Merc thermostat units to be used with EMI Thunder manifolds. Sold individually, two will be required to convert your 4-hose Merc unit.
Not Yet Reviewed
$85.95
Eddie Marine Pro-X control cables are commonly used for throttle, shift or diverter cables. They're built with highly efficient armored core technology, a stainless steel flat wire swaged over stainless steel stranded cable—with a specially processed polymer liner to provide low friction, high flexibility, and high strength. The replacement control cables are available in a variety of lengths and end types to fit your boating needs.
( 1 )
$108.00
Eddie Marine transom flange and gasket kits supply leak-free transom sealing. For 4 in. dry tailpipes or their no-flange exhaust tips, these polished stainless steel flange and silicone gasket sets are an excellent fit, even with extreme transom angles—the gasket stretches to seal against the exhaust.
Not Yet Reviewed
$104.95
Eddie Marine billet aluminum drink holders feature an attractive and functional design for holding a soda can or fountain drink. A simple press fit, or a small amount of glue or silicone will hold them in place. The drink holders are CNC-machined from a solid chunk of 6061-T6 aluminum, and are available in a raw machined or bright polished finish, addition to a variety of anodize and powdercoat colors.
Not Yet Reviewed
$79.95
Eddie Marine is the largest supplier of custom switch panels in the performance marine industry. These billet aluminum switch panels are machined from 6061-T6 aluminum on precision CNC mills and are offered polished or Fusioncoated. To further enhance the look of the panels, they're laser engraved for the cleanest graphics possible. The switch panels are available in a large variety of configurations to fit your electrical needs.
( 1 )
$60.00
Eddie Marine billet aluminum slimline cleat bezels add a complementary look to your boat. These bezels install against the deck underneath the cleats. They're available in many polished and anodized finishes, as well as a variety of Fusioncoat colors. Order the size and finish you prefer.
Not Yet Reviewed
$55.95
Eddie Marine heavy-duty water hose features a 2-ply reinforced construction that resists salt water, ozone, and the elements. The hose is commonly used for engine cooling, bilge intakes, and drains. Eddie Marine offers heavy-duty water hoses in a variety of diameters and lengths. Order the amount needed for your applications.
Not Yet Reviewed
$55.95
—
$82.95
Eddie Marine vents will add a touch of style to your boat, while providing proper ventilation. They're machined from 6061 T-6 billet aluminum and are available in a variety of sizes, shapes, and finishes.
Not Yet Reviewed
$94.95
Eddie Marine's cast aluminum valve cover breathers are designed for use with their EMI Thunder valve covers. They feature a removable top cap for easy oil filling and they include gaskets. Eddie Marine breathers are available polished and in a variety of Fusioncoat colors.
Not Yet Reviewed
$56.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
