Availability
Earl's Performance power steering hoses are triple-steel and fabric braid-reinforced high-pressure hoses. They were developed specifically to meet the demands of power steering systems. These flexible hoses are also suitable for hydraulic and air lines, and come with a blue or black fabric outer covering. When used with Earl's power steering hose ends, Earl's power steering hose is rated for up to 2,250 psi operating pressures. The use of other manufacturer's hose ends is not recommended.
( 27 )
$90.39
—
$94.95
The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.
( 34 )
$78.65
—
$78.99
Earl's Performance transmission cooler line adapters make your plumb job easier. Integrating into the transmission and adapting to AN lines allows additional tunnel clearance and freedom that the original hard lines cannot. These adapters are available for many plumbing situations and custom applications. They're machined from high-quality materials, including nickel plated steel or billet aluminum with a black anodized finish, and have high-pressure capabilities. Order the adapter size and configuration needed for your application.
( 33 )
$65.39
—
$70.79
Due to extreme pressure spikes at the end of steering travel, power steering hose requirements are among the toughest in the industry. These steel power steering hose ends from Earl's have been developed specifically to meet these requirements. They're available in a variety of sizes to suit your needs.
( 66 )
$56.19
—
$66.59
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose fittings in their Swivel-Seal hose ends. These components are precision-machined to exact tolerances for trouble-free performance. Some features include an unmatched bend design, allowing for the maximum fluid flow capacity, and aluminum retention pins, allowing for 360 degrees of adjustment after installation. The nipple-and-cutter design that Earl's uses has been aerospace-proven for more than 40 years.
( 167 )
$53.25
—
$106.95
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$64.98
—
$76.45
Allow for the instant disconnection and reconnection of fuel, lubricant, and hydraulic lines with virtually no spillage with these Earl's Performance quick-disconnect fittings. Flow restriction is minimal and Buna seals are compatible with most fuels and lubricants.
( 21 )
$62.45
—
$66.59
Earl's bulkhead adapter fittings provide an easy way to securely connect your lines together through firewalls, panels, etc. They are available in aluminum or steel, and in a variety of sizes, configurations, and finishes.
( 31 )
$56.19
—
$73.25
Earl's Performance brake booster check valves replace your OEM plastic valve for a clean, custom appearance. Choose from black or clear anodized finish and three vacuum hose options. The valves fit most brake boosters or vacuum canisters with a 13/16 in. O.D. on booster. Replace that plain, old plastic valve with a more attractive Earl's brake booster billet aluminum check valve. Features: * Machined from billet 6061-T6 aluminum * Anodized black or clear for superior corrosion protection * 90 degree angle * 1/2 in. vacuum hose barb fits most GM LS engines * 3/8 in. vacuum hose barb fits most other domestic and import engines * -06 AN male vacuum hose for use with -AN hose * Valve material: premium FKM (lasts much longer than OEM plastic and rubber valve) * Fits most brake boosters with 0.588 in. port (I.D. of the grommet)
( 6 )
$82.45
—
$87.95
Earl's Performance Speed-Flex hose is used with the Speed-Seal reusable hose ends and can handle pressure of up to 3,000 psi. Earl's considers it their highest-pressure hose, and it's lightweight and resistant to almost everything. Speed-Flex is most commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, power steering, and fuel and oil lines. It's constructed from synthetic rubber or PTFE, with a braided stainless steel covering. Some hoses are PCV coated, as well. Your options include operating psi, size, length, and color. Order the Speed-Flex hose needed for your applications.
( 22 )
$79.99
—
$93.25
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 23 )
$84.25
On Sale
Earl's lightweight UltraPro hose ends are designed to withstand harsh environments, brutal vibration, high-flow requirements, and extreme pressures! Their offered selection features Dynamic Swivel technology that allows for 360 degrees of rotation of installed line after installation, furnace-brazed bent tubes for a permanent and robust bond, as well as twist-on and crimp-on styles to provide you with more plumbing options at home and the track. Their high-stress components are constructed from high-strength 2024-T8 aluminum and receive Earl's popular Ano-Tuff black hard coat anodizing for extreme durability. Plus, they are fitted with rugged fluoroelastomer internal seals, which are chemically resistant to all known fuels, oils, and coolants. Whether you go with straight or bent, swivel or non-swivel, twist or crimp, Earl's UltraPro hose ends will deliver winning performance and looks.
( 26 )
$53.25
—
$87.95
On Sale
Earl's Performance AN to straight cut O-ring fittings allow you to plumb from an AN line to a fitting that uses an O-ring seal. They are manufactured from high-quality aluminum and are anodized for protection against corrosion. Earl's Performance AN to straight cut O-ring fittings are available in different configurations and styles, so you can use them throughout your vehicle.
( 60 )
$56.19
—
$73.25
Earl's Performance carburetor Vapor Guard hoses combat modern fuel's deterioration and eliminate the safety hazards associated with fuel vapors and the leakage that occurs as the traditional rubber hoses deteriorate. Earl's Vapor Guard hoses are multi-layered and designed to withstand the corrosive properties of modern fuels. The initial layer offers high resistance to heat and aggressive fuels, and they save one gallon of gas each year as compared to traditional rubber hoses from permeation alone. Earl's Vapor Guard hoses are your long-lasting hose solution!
( 4 )
$59.89
—
$62.45
On Sale
Earl's Performance Speed-Flex brake lines are factory-assembled brake lines made from the same Speed-Flex stainless steel braid-protected hose of extruded PTFE that is the worldwide standard of the racing industry for flexible brake, clutch, and instrument hoses. They're assembled with Earl's Speed-Flex crimp or swaged permanently-installed hose ends. Speed-Flex brake lines provide a firmer brake pedal, improved brake pedal feel, and better brake modulation. Each hose is pressure tested to 4,000 psi.
( 105 )
$53.25
—
$66.59
Earl's Performance annealed stainless steel tubing will assist you in creating precision hardline systems. The straight lengths of 304 stainless steel are easily formed with tools and can be flared. Plus, they can be polished for a custom look. Earl's tubing is available in several diameters and lengths to fulfill your application needs.
( 11 )
$53.25
—
$99.95
On Sale
Earl's Speed-Seal hose ends are reusable and have a proven record of reliability throughout the racing industry. Because brake system hose ends are subject to wear and tear from extreme vibration, these forged hose ends have an 80 percent greater wall thickness than any other on the market. These Speed-Seal hose ends are available in stainless steel or aluminum, bent tube or low-profile, and adjustable or non-adjustable configurations. They're made for use with Speed-Flex smooth bore hoses.
( 35 )
$56.15
—
$94.95
On Sale
These high-temperature elastomeric auto-flex hoses are ideal for almost all street and marine applications, and many non-critical competition uses. These high-quality hoses have a nice looking stainless braided outer cover that protects the synthetic rubber inner liner, allowing continuous operating temperatures of -40 degrees to 300 degrees F. These auto-flex hoses are good for fuel, oil, water, and many other fluids.
( 30 )
$59.95
—
$105.95
Earl's Performance quick-connect fuel rail adapter fittings are a slick, easy way to use AN plumbing with late model OE fuel rails and fuel lines. Each quick-connect features two reusable metal retainers that won't break or melt. The secondary retaining clip is attached to the fitting on a tether chain. These fittings are available in a variety of sizes, materials, finishes, and attachment styles. Product features: * One-hand "click" connection to OE line * Metal internal and external retainer provides a reliable and reusable fuel connection that cannot snap loose or melt like some plastic retainers * O-ring material developed specifically for the same application on factory vehicles to tolerate today's fuel additives and E85 * Tether chain keeps secondary retainer clip attached to the adapter, so it's always handy (installed retainer can also be safety wired to adapter for additional safety) * Fits most vehicles with 3/8 in. fuel rail and SAE standard connection
( 4 )
$99.95
When it comes to running brake, fuel, or transmission cooler lines, you'll need Earl's Performance steel tubing. They use double-wall low carbon steel, as well as copper brazed tubing that comes with either zinc plating or an olive poly-vinyl-fluorine (PVF) coating ideal to use on vehicles exposed to snow, road salt, gravel, salty air, or other extreme environments. Earl's Performance steel tubing is DOT-approved for hydraulic systems, available individually or with tube nuts, and comes in 3/16, 1/4, 5/16, and 3/8 in. diameters.
( 5 )
$55.55
—
$66.99
Earl's steel-braided, PTFE Speed-Flex hose and line take special Speed-Seal hose fittings and adapters like these tee adapters. They are offered in aluminum, steel, and stainless steel. Aluminum adapters are not recommended for use in braking systems.
( 3 )
$87.45
Earl's Performance fuel line adapter fittings are precision-machined to exacting tolerances for trouble-free performance. They are available in many configurations for numerous plumbing situations and custom applications. Earl's has the most complete line of adapter fittings in the industry!
( 5 )
$66.55
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 39 )
$65.39
—
$99.95
Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.
( 3 )
$53.25
—
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
