Availability
DEI Heat Sheath sleeves are made from high-temperature fiberglass fabric bonded to aluminized material and then sewn into a tube. Designed to slide over wires and hoses, these sheaths can be easily shaped to fit the tightest bends. They will reflect up to 90 percent of the radiant heat and can insulate against up to 500 degrees of direct, continuous heat. They can be easily cut to length with scissors or a sharp knife and come in five popular diameters from 3/4 in. to 1 1/4 in., in 3 ft. lengths. They are also available in bulk, up to 50 ft. rolls.
( 89 )
$14.99
—
$21.99
Wrap your lines and wires with DEI Cool Tape. It's 40 percent lighter and reflects 30 percent more heat than other tapes. It has a smooth finish and a strong adhesive backing.
( 37 )
$17.99
Design Engineering Fire Sleeves offer ideal protection against intense underhood heat, making them perfect for protecting hoses, oil and fuel lines, and electrical wiring. The Fire Sleeves are constructed of a woven fiberglass braided sleeve heavily coated with 100 percent iron oxide silicone rubber. They are capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent.
( 27 )
$21.99
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 23 )
$10.99
—
$22.99
Design Engineering's short roll exhaust and header wrap is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers reduces underhood temperatures by up to 50 percent while providing additional horsepower, engine protection and passenger comfort. These header wraps use a hi-temp fiberglass composite material with a proprietary coating to enhance heat retention and expand durability.
( 19 )
$12.99
—
$19.99
DEI aluminized spark plug wire sheaths are made from the same material as DEI heat sheaths. They're designed as inexpensive protection for plug wire boots—or any spot on a plug wire that is close to heat and requires additional protection. These slip-on sheaths can also be used to cover lines, wires, and hoses that need protection in a specific area. The plug wire sheaths are 6 in. long x 3/4 in. diameter. Additional features and benefits: * Inexpensive protection for spark plug boots * Reflects radiant heat from headers and engine * Easy to install * Four per pack
( 46 )
$13.99
DEI has taken premier Titanium LR technology and transformed it into the best protection sleeves on the market. DEI Titanium Protect-A- Sleeves are capable of withstanding temperatures up to 1,800 degrees F direct heat and 2,500 degrees F radiant, shielding your wires, lines, and cables from damage. The sleeves are available in 4 ft. lengths. The 1/2 in. inside diameter will fit larger spark plug wires to protect them from hot exhaust manifolds and headers.
( 5 )
$19.99
Design Engineering Protect-A-Boots keep your plug wire boots and wires safe from header and exhaust manifold heat, lowering the risk of backfiring and engine damage. Guaranteed up to 1,200 degrees F, they fit most straight or 90-degree boots.
( 78 )
$19.99
—
$21.99
DEI heat shield mounting kits are designed for ridged or semi-ridged heat shields. The universal bolt-on kits Include six 1/2 in. tall stainless standoffs with hardware.
Not Yet Reviewed
$19.99
DEI titanium exhaust wrap with LR technology is constructed from pulverized lava rock, extruded into fibers, and then woven into a tight weave, giving it titanium-like strength and toughness. The improvement in thermal protection helps to reduce underhood temperatures, resulting in cooler air intake for improved performance. And less heat in the engine bay means less chance of heat soak conditions on vital underhood components. Typical glass fiber wrap is rated at handling 1,200 degrees F of maximum direct heat, while DEI's titanium wrap, using LR technology, is capable of handling direct continuous heat up to 1,800 degrees F and radiant heat up to 2,800 degrees F. And because it's pliable, there's no need to wet the wrap when wrapping headers or pipes, as many do in order to make the wrapping process easier to manage and to get a tight wrap. Titanium wrap will not shrink, and because of its material structure, it is more resistant to temperature and vibration breakdown, abrasions, chemical and hot oil spills than glass fiber wrap. Plus, DEI titanium wrap offers a very cool carbon fiber look as an added feature!
( 254 )
$15.99
DEI wide band stainless steel clamps are perfect to enhance the look of their exhaust wrap on your motorcycle. They are extra-wide to cover the end of the wrap and give a clean transition from wrap to pipe. Made entirely from 300 Series stainless steel, they will stay new looking for years, and they are available in the most popular pipe sizes. Features include: * Can be polished to a show finish * 2 3/8 in. clamps have a range of 2.25 in. to 2.56 in. * 2 in. clamps have a range of 1.88 in. to 2.19 in.
( 1 )
$22.99
Use DEI asbestos-free exhaust wrap as a heat barrier to keep the engine and driving compartments cool. It also keeps wires and hoses from melting under extreme conditions and controls heat in the exhaust system for a performance boost.
( 36 )
$11.99
—
$19.99
Oil filters soak in a lot of heat from high performance engines, as they're nestled tight to the oil pan and engine. DEI's oil filter heat shields effectively block radiant heat that can change the oil's viscosity—or potentially cause a thermal breakdown that will make the oil additives degrade, dissipate, and wear out quickly. These easy-to-install oil filter covers block that heat and reduce oil temperatures, and their universal trim-to-fit sizes will work on any oil filter.
Not Yet Reviewed
$14.99
Protect-A-Wires from DEI provide thermal protection for various under-hood components, such as spark plug wires, electrical wiring, and hoses, by shielding them from extreme engine and exhaust heat that can cause cracking, hardening, or burning. Basic sleeves are made from the same fiberglass composite as Protect-A-Boots to resist high temps. Upgrade kits include materials such as silicone and titanium for even greater heat insulation. To install, simply remove the distributor boot and connector, then easily slide on your Protect-A-Wire covering over the spark plug. This tubing can also be used to wrap speedometer cables, electrical wiring, and hoses. Multiple diameters, lengths, and colors are available. Product Overview: * Durable construction, made from high-temperature resistant materials * The titanium versions are resistant to chemicals and oils, offering comprehensive protection in various engine environments * Can be used to protect a wide range of components, including spark plug wires, fuel and oil lines, and speedometer cables, and are suitable for various vehicles from street cars to Powersports and marine applications * Shields sensitive components to prevent burning, cracking, and hardening of spark plug wires, electrical wiring, and hoses caused by severe under-hood temperatures, saving on replacement costs * The sleeves are designed to easily slide over existing wires and cables * Provides a professional-looking finish under-the-hood of your vehicle
( 5 )
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
