Availability
Denali Electronics SoundBomb Compact Dual-Tone air horns produce an ear-splitting 120 decibels of sound. These small horns feature a rugged molded clamp that mechanically mates the compressor to the acoustic unit. Because of the compact design and blacked-out housing, these horns will practically disappear once installed. They're virtually indestructible and are compatible with all CANbus electrical systems. Other specs: * 20 amp power draw * Dimensions: 5.40 in. x 4.50 in. x 3.60 in.
( 3 )
$69.99
—
$153.99
Denali Electronics SoundBomb horn wiring harnesses offer the easy and inexpensive way to connect your horn. These plug-and-play wiring harness are designed for SoundBomb compact and split horns, and they do not require any cutting, soldering, slicing, or crimping as long as the original horn has blade-style electrical connections. Features: * Extra connections for custom applications * 5.5 ft. harness length * 30 amp mini in-line fuse * Inline relay socket * Protective vinyl sheath * Weather-resistant
( 1 )
$39.99
Denali Electronics DRL visibility pods are purpose-built to create the most light from the smallest, low-profile housing possible. DRL (daytime running lights) auxiliary lights are unbelievably bright—but will practically disappear once installed. The white or amber pods are compatible with a variety of mounting kits that enable the lights to be used as DRLs, turn signals, and backup lights. Choose between an offset mount, fender mount, or flush mount. Using the included wiring adapter, the DRLs can be directly plug-and-play connected to a CANsmart accessory controller or to any Denali 2.0-series wiring harness. When connected to a Denali 2.0 harness, the DRLs will run only in high-intensity mode. But when connected through the CANsmart, the DRLs can be fully dimmed.
Not Yet Reviewed
$72.99
Denali Electronics B6 brake light visibility pods are purpose-built to create the greatest amount of light from the smallest, most low-profile housing possible. The B6 brake lights are unbelievably bright, but will practically disappear once installed. Complete with an integrated run-brake circuit, the 3-wire B6 pods will run at 50 percent intensity on the red wire—and switch to 100 percent intensity via the orange wire. These pods are compatible with a variety of mounting kits that enable them to be mounted below a license plate, on the side of a license plate, or flush mounted onto any flat surface. Complete with a waterproof micro-connector and included posi-taps, the B6 third brake light assemblies are easy to connect into any vehicle's brake light circuit. The B6 also connects directly to the Denali CANsmart Controller—to enable programmable flash pattern braking and deceleration-activated auto brake light functionality. B6 is, simply, the brightest and most feature-rich auxiliary brake light on the market. Features: * Dual circuit: Running and brake * 180 degree viewing angle * Six high-power LEDs * Low 6 watt power consumption * Low-profile design
( 3 )
$72.99
—
$138.99
Denali Electronics DM LED light pods were designed to concentrate 1,095 lumens into a small optic to create a super-compact light that's incredibly bright to look at. These lights are the ideal solution for daytime visibility but will still outshine your typical high beam. Features and contents: * High-Intensity Series Cree LEDs outputting 1,095 lumens per pod * DrySeal submersible waterproof light can withstand the most extreme environments * Impact PC polycarbonate bezels won't crack, fade, or corrode like traditional aluminum bezels * LiveActive Thermal Management keeps the LEDs cool, preventing the loss of light output from overheating * IP67 waterproof and submersible * One LED light pod * One spot lens (installed) * One E-Mark approved elliptical flood lenses * One hinge mount with M8 stainless steel hardware * One wiring pigtail
Not Yet Reviewed
$133.99
Denali MT Series connector sets are the same ones used in the Denali 2.0 lights and harnesses. These premium connector kits include both the male and female connector, crimp on terminals, and waterproofing wire seals. Denali MT Series connectors can be crimped onto wires in seconds to modify, customize, or replace electrical connections.
Not Yet Reviewed
$5.49
—
$7.69
Denali Electronics SoundBomb Split Dual-Tone air horns produce an ear-splitting 120 decibels of sound. Their unique 2-piece design separates the compressor from the acoustic unit, allowing the horn to be installed in tight spaces. A 48 in. heat-resistant air hose connects the two halves, allowing them to be mounted in an entirely different locations. With a blacked-out housing and compact design, these horns practically disappear once installed. Other specs: * 20 amp power draw * CANbus compatible * Compressor size: 4.50 in. x 2.90 in. x 3.00 in. * Acoustic unit size: 4.10 in. x 3.70 in. x 3.40 in.
Not Yet Reviewed
$75.99
Denali Electronics D2 LED light pods feature DataDim Technology and create an impressive beam of light that is perfectly balanced between nighttime distance and daytime conspicuity. Features and contents: * High-Intensity Series Cree LEDs outputting 1,095 lumens per pod * DrySeal submersible waterproof light can withstand the most extreme environments * Impact PC polycarbonate bezels won't crack, fade, or corrode like traditional aluminum bezels * LiveActive thermal management keeps the LEDs cool, preventing the loss of light output from overheating * One LED light pod * One spot lens (installed) * One E-Mark Approved elliptical flood lens * One hinge mount with M8 stainless steel hardware * One wiring pigtail
Not Yet Reviewed
$179.99
Clearance
Denali Electronics DR1 LED light pods feature a unique oversized reflector that creates an industry-leading 1,000-ft. beam distance from the single 10 watt Cree LED. No other 10 watt Cree LED even comes close. These light pods are ideal for night riding conditions where maximum beam distance is desired. The included True-Hybrid lens carries an official e-Mark certification and creates a more balanced combination of distance and width. Denali DR1 auxiliary LED lights are optimal lighting options for motorcycles, ATVs/UTVs, snowmobiles, Jeeps, and trucks. DR1 features: * High-Intensity Series Cree LED outputting 1,095 lumens per pod * DrySeal submersible waterproof light and switch housings can withstand the most extreme environments * Impact PC polycarbonate bezels won't crack, fade, or corrode like traditional aluminum bezels * LiveActive thermal management keeps the LEDs cool, preventing the loss of light output from overheating * DataDim compatible * IP67 waterproof and submersible * Low-profile mounting bracket with stainless steel hardware included * Additional e-Mark approved flood lens included * Amber lenses available (sold separately)
( 1 )
$178.99
$89.50
Denali Electronics driving light mounts are offered in universal and vehicle-specific applications to better suit your specific needs. These powdercoated brackets assist in mounting any Denali driving light in the optimum position—be it a motorcycle, ATV, snowmobile, or Jeep. Order the model you need.
Not Yet Reviewed
$48.99
—
$145.99
Position your lights with Denali Electronics articulating bar clamp light mounts. Offered in several choices, these unique mounts feature an octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters. Each clamp comes with a fully rotatable mounting shelf that creates a super versatile and robust light mounting solution. They will fit engine guards, crash bars, frame tubes, handlebars, inner or outer fork tubes, or any tube within the clamp's specified diameter range on just about any 2- or 4-wheeled machine you're driving. Articulating bar clamp mounts features: * Billet aluminum construction * Available in anodized black or polished chrome * Adjustable grip range * Rotatable mounting shelf allows fourth axis of adjustability * Mount lights to shelf or directly to the clamp itself * Accepts M8 bolt from light pods * Kits include two clamps, two rotatable mounting shelves, and hardware kit
( 2 )
$92.99
—
$122.99
Denali Electronics driving light extension harnesses features a clever HotSwap design that enables an effortless swap from the standard single-intensity relay to Denali dual-intensity DataDim controller. (sold separately) Plug in Denali DataDim controller to enable the lights to switch between half and full intensity with your vehicle's original high beam switch.
( 2 )
$21.99
—
$54.99
Denali Electronics LED headlight module "All-On" adapters permit the use of low beam and high beams simultaneously. Exclusive to the Denali M5 and M7 LED headlight modules, the adapters offer simple plug-and-play installation "inline" between the modules and your motorcycle. Improve lighting on the sides of the road, directly in front of the motorcycle, and over 500 ft. down the road when your headlights are "All-On" with Denali adapters.
Not Yet Reviewed
$40.99
Denali Electronics DrySeal HI-LOW-OFF waterproof switches replace the standard ON-OFF switch. They enable independent dimming of the lights, separate from the vehicle's OEM lighting system. This eradicates the issues presented by vehicles that do not provide a clean 12 V high beam trigger signal. These switches are also a great option for those who want full independent control of their auxiliary lights. In addition to molded silicone gasket seals, Denali uses a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures the housings are 100 percent watertight, even when submerged underwater with the wires cut and connector removed.
Not Yet Reviewed
$38.99
Clearance
Denali Electronics H4 anti-flicker adapters are specially designed to accompany the M5 and M7 DOT LED headlight modules—to eliminate flickering caused by PWM dimming signals used in many CAN bus systems. The plug-and-play adapter is for use with vehicles originally equipped with H4 headlight bulb size. The adapter simply plugs inline between the M5 or M7 headlight and the vehicle's factory H4 headlight connector.
Not Yet Reviewed
$52.99
$26.50
Clearance
Denali Electronics fog light mounts are machined from heavy-duty steel to secure your compact and powerful Denali DR1 LEDs. These Jeep-specific mounts are black powdercoated for added durability and are designed to fit in the factory fog light location to make installation easy. The brackets come with the necessary wiring adapter to plug your DR1 lights directly into the factory harness. This provides you control from the factory fog light switch. Secure your fog lights properly with the easy installation of Denali mounts.
Not Yet Reviewed
$95.99
$47.50
Clearance
Denali Electronics flush light mount kits provide a waterproof gasket and all the necessary hardware for installing a Denali DRL or B6 visibility pod to any flat surface on your vehicle. You can use these kits to mount DRLs to body panels and hand guards or flush mount B6 brake light pods directly to your rear bumper or on the back of your luggage cases.
Not Yet Reviewed
$19.00
$11.50
Denali M7 LED headlight modules are direct plug-and play replacements for the original 7 in. sealed beam headlights on your motorcycle. They feature a super-wide low beam, piercing high beam, and halo daytime running light. Drop one of these modules inside your existing headlight housing to throw a blazing beam of light three times further than your stock halogen headlight—and twice as far as a stock LED headlight. The unique design and black chrome finish of the optics will give your bike a modern custom look, while also increasing your visibility to oncoming traffic even during daylight. Additional product features: * Plug-and-play with H4 connectors * Premium LEDs boast an average life span of 50,000 hours * DOT-approved high and low beams * Robust aluminum housing * Enhances visibility and safety * IP-68 waterproof
Not Yet Reviewed
$509.99
Denali Electronics DataDim dual-intensity controllers enable Denali driving lights to switch between half and full intensity with your vehicle's original high-beam switch. Simply plug this controller into the harness end included with their LED light kits to enable dual-intensity functionality. All Denali 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit. It allows the use of an external signal for reliably controlling intensity of the LED chip at the source. Order a Denali DataDim dual-intensity controller for driving light harness to set the intensity level for all your vehicle's lights with your high-beam switch. In the box: * DataDim dual-intensity controller * Dual-intensity trigger wire
( 1 )
$60.99
Clearance
Denali Electronics OEM Harley-Davidson® LED to H4 wiring adapters make it easy to install a Denali M5 or M7 LED headlight module into any Harley® motorcycle originally equipped with an LED headlight. Plug-and-play installation is simple, with no wires to splice into and your factory harness remains intact.
Not Yet Reviewed
$38.99
$19.50
Denali Electronics D2 LED lens kits are designed to maximize visibility in foggy and rainy conditions. Both amber and Selective Yellow lens colors increase visibility in fog and rain by blocking blue frequencies from the light, which reflect off water vapor and decrease vision. Choose amber to match your OEM turn signals, or Selective Yellow for even more daytime visibility to oncoming traffic. You could also use one of each to create a 50-50 True-Hybrid that combines the best of both worlds! Order a TriOptic replacement lens kit for your Denali Electronics D2 lights to penetrate foggy, wet conditions. D2 LED lens kit - in the box: * 2 D2 spot lenses for maximum distance * 2 D2 flood lenses for maximum spread
Not Yet Reviewed
$29.99
Clearance
Denali Electronics fender light mount kits are purpose-built to secure their DRL and pod lights. The kits contain high-quality components that are simple to install, and allow you to position your lights ideally where you want on your motorcycle, ATV, or other 2- or 4-wheeled machine. They are also designed to not disturb the natural aesthetics of your vehicle. Select the Denali fender mount light kit that best suits your needs.
Not Yet Reviewed
$89.00
$44.50
—
$58.99
Use this Denali DRL CANsmart wiring adapter for plug-and-play connection of Denali DRL lights to the CANsmart controller. The adapter simply plugs inline between the DRL Lights and the CANsmart auxiliary light circuit.
Not Yet Reviewed
$6.59
Denali Electronics' D4 LED light pods are one of their most powerful lights, packing the punch of 4,380 lumens in an aggressively styled housing. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern: a super-wide, close-range flood and a piercing spot beam in one housing. The included spot lens projects a massive beam of light and carries an official e-Mark certification. Denali D4 auxiliary LED light pods are ideal lighting options for motorcycles, ATVs/UTVs, snowmobiles, Jeeps, and trucks. D4 pod features and specs: * High-Intensity Series Cree LEDs (10 W; XPL HI) outputting 4,380 lumens per pod * DrySeal submersible waterproof light and switch housings can withstand the most extreme environments * LiveActive thermal management keeps the LEDs cool, preventing the loss of light output from overheating * Low-profile mounting bracket with stainless steel hardware included * Amber lenses available (sold separately) * Power draw: 3.3 amps * DataDim compatible: yes * Operating voltage: 12 V DC * Pod size: 3.9 in. square x 2.6 in. deep (each) * Pod weight: 1.55 lbs. (each) * IP67 waterproof and submersible In the box: * 1 LED light pod * 1 True-Hybrid lens (installed) * 1 e-Mark-approved spot lens * 1 hinge mount with M8 stainless steel hardware * 1 wiring pigtail
Not Yet Reviewed
$244.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
