Availability
Dedenbear WP3s are the ultimate electric water pumps for dragsters and roadsters using remote, frame-mounted pumps. These universal pumps weigh just 3.25 lbs. and draw only 3 amps--yet they pump 15 gpm! They can be mounted in any position. Unlike rubber-impeller RV and boat units now in use, these rebuildable water pumps feature a hard-anodized, billet-aluminum impeller and custom seal. The inlets accept either 1.25 in. hose or 3/4 in. NPT; the outlets are 3/4 in. NPT.
( 6 )
$514.99
At 4 lbs. and just 4.25 in. deep, these Dedenbear one-piece aluminum pumps draw only 3.5 amps, half the current draw of regular electric pump drives. These units crank out 20 gpm of flow, and withstand temperatures of up to 250 degrees, and pressures of up to 30psi. These units feature ball bearing motor, a threaded water inlet for 1.25 in. hose, 1.75 in. hose, or 1 in. braided line, plus, these electric water pumps are rebuildable.
( 5 )
$606.99
Dedenbear Lightning delay boxes feature a billet aluminum enclosure that keeps all of the precision circuitry protected. The small multi-functional units' can be every racers little helper! Features include: * Four different delay modes * Tap/tap down * Starting line launch control * Two 4-stage throttle stop/nitrous timers * Adjustable transbrake lockout * East touch illuminated keypad * Lighted display for easy nighttime viewing * Independent line lock output * Remote dial-in board display output * Accidental transbrake release protection
( 1 )
$709.99
—
$746.99
Dedenbear offers linkage throttle stops for virtually any application and budget. They come with a needle valve adjuster to control the opening rate, quick disconnect fittings, a stainless steel solenoid and cylinder, and high-temperature seals. All steel parts are plated to protect against corrosion. All linkage throttle stops are available with Dedenbear's CO2 bottle kits.
Not Yet Reviewed
$516.99
—
$736.99
Dedenbear shifter solenoids will make sure your transmission is shifted at the same exact RPM every time down the track. Certain models include an RPM-activated switch that you can adjust with the push buttons located on the switch. Also included is a universal mounting bracket that fits 2-speed Powerglide shifters.
( 2 )
$516.99
Dedenbear digital LED dial-in boards display your dial-in with a super-bright 4 in. tall LED readout. The units have a lightweight, clear anodized, billet aluminum housing and "no-glare" lens that is sure to look outstanding in your dragster or door car. A built-in sun sensor measures brightness and automatically dims the display at night. These boards will require a signal sent from a CC3, BM2, or MC1 (all sold separately) to display your dial-in.
Not Yet Reviewed
$594.99
Dedenbear Multiple Relay Center units allow you to pre-wire all the relays in a single unit. Basically each stage has a signal wire going in and a power wire going out. The inputs and outputs have indicator LEDs for easy trouble shooting. All of the wiring mess is replaced with one simple compact relay center for the utmost in reliability. These units are so versatile, that they can be used to power anything in a car that needs high power levels, not just nitrous systems. * Use for high powered Nitrous solenoids or other high power devices such as fuel pumps, water pumps, throttle stops, fans, etc. * Four relays pre-wired and ganged together to power up to four stages of NOS solenoids * One separate relay with inputs and outputs completely isolated to allow wiring in any configuration * Relay inputs can be "negative" or "positive". *Relay outputs can be "negative" or "positive". * Indicator LEDs for relay coils and outputs make troubleshooting a snap. * Easy access replaceable fuses for each relay. * Incredibly simplifies wiring and improves reliability.
( 1 )
$556.99
Let these Dedenbear CO2 shifters do the shifting for you! They offer a reliable and efficient way to automate shifting in vehicles with automatic transmissions, particularly in drag racing applications. Dedenbear 2-speed and 3-speed CO2 shifters are engineered to make the low to high shift on 2-speed Powerglide transmissions and the 1-2 and 2-3 shifts on 3-speed transmissions. Dedenbear CO2 shifters utilize large, oversize cylinders and high-flow solenoid valves, ensuring quick and precise gear changes. They are designed as direct bolt-on units, requiring no modifications to compatible shifters. Simply bolt the assembly to the shifter, plumb the airlines, and attach two wires. All parts are plated for corrosion resistance and a professional appearance. Dedenbear offers their CO2 shifters individually or as shifter kits with options, including CO2 bottles, rpm switches, and different mounting hardware, allowing for customization based on your specific application needs for your vehicle.
( 1 )
$502.99
—
$722.99
Dedenbear's two and four-stage throttle stop controllers feature independent timers to give you more complete control over your throttle stops, unlike other controllers that start their timers simultaneously. The timers run independently of each other so you can change the setting of one timer without affecting the others. The controllers also feature exclusive quartz crystal timing for accuracy, and a special ignition-noise filter to eliminate the vibration and interference that come with other models. Compact and simple to install, the throttle stop controllers require just four wires. A single output wire connects to your throttle stop, and a built-in switch allows you to change the sequence of the output.
Not Yet Reviewed
$544.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
