Availability
Your vehicle can't go anywhere without wheels. Crown Automotive wheel hub assemblies get your wheels bolted up for smooth rolling. They have a selection to fit a range of applications, and all offer steel construction in direct replacement designs. Crown wheel hub assemblies ensure a good fit and lasting durability to take you wherever you want to go.
( 5 )
$64.99
—
$95.99
Oversize tires and stock manual locking hubs go together as well as water and oil. If you've heard the loud "POP," signaling blown hubs, or wish to be proactive, replace them with Crown Automotive manual locking hubs. These hubs provide greater strength than the stock units to help you crest steep hills, roll through rocks, and slide through mud. Crown Automotive manual locking hubs will have you rocking and rolling.
( 5 )
$132.99
—
$143.99
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 31 )
$52.99
—
$63.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 29 )
$51.99
—
$75.99
Crown Automotive clutch pivot repair kits can help you maintain your clutch linkage and keep your clutch engaging smooth and easy. Over time your clutch pedal bushings will wear out and become sloppy. These quality OE type kits include bushings, clips, and end boots. They are an easy install and a must for your old Jeep that has shifted gears for many miles.
( 5 )
$10.99
Crown Automotive clutch linkage rods provide the fit and function of factory-style equipment. And that means smoother shifts for you. These OE replacements are made from quality materials and are available in a couple of styles and several applications to renew your vehicle's performance.
( 11 )
$8.99
—
$22.99
Most transmission and transfer case boots get put through the ringer. If your old boots are deteriorated or torn up, replace them with Crown Automotive shifter boots. These rubber boots are fashioned identically to the originals, down to the bolt holes. Crown Automotive shifter boots bring OE style and performance to your ride.
( 35 )
$23.99
Crown Automotive clutch release bearings will restore the "heart" of your clutch operation. Whether you call them throwout bearings or release bearings, they are the components that move back and forth—pushing and releasing the other components to engage or disengage your clutch for smooth shifting. Just as your heart's pumping keeps you going, so it is with the release bearing and your clutch. So, for an OE fit and better clutch performance, choose your replacements from the Crown selection—available for a wide range of makes and models.
( 6 )
$54.99
Crown Automotive converter drive plates can restore efficient transmission drive and also maintain starter operation. With a superior grade metal construction, these converter drive plates are a direct replacement for the OEM part, so installation is at least as straightforward as with the stock component. Order the model designed to fit your application. Whether you're looking to service, optimize, or upgrade, Crown Automotive has quality parts to get your Jeep and Mopar vehicles back on the road.
Not Yet Reviewed
$135.99
Crown Automotive replacement brake hub dust caps seal out moisture and dirt. They are made from quality steel and are zinc plated.
Not Yet Reviewed
$11.99
Crown Automotive U-joint strap kits are constructed from heavy-duty materials to match OEM standards for better performance and increased reinforcement. They offer superior strength and security to ensure that your U-joints stay fastened in place. These U-joint kits include everything that's needed to be properly installed in just minutes.
( 4 )
$3.99
—
$9.99
If your clutch moves too freely, it's probably time to replace the clutch linkage firewall boots. Crown Automotive patterns their boots after the stock dust boots that were primarily included with your Jeep, so that you can be sure of their capabilities. Protect your transmission components from debris, so that they will perform proficiently, and you can drive with assurance.
( 2 )
$8.99
Crown Automotive spider gear kits will help renew your turning performance. These differential gear sets are precision-made from quality materials to once again enable your vehicle to turn with ease. Spider gears, side gears, washers, and other parts that may be included in your kit selection will mesh together perfectly to create rotation inside of your differential and spin your wheels at different speeds. Restore smoother turning by installing Crown spider gear kits.
( 10 )
$120.99
—
$404.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$5.99
—
$263.99
Worn gaskets can often become cracked, defeating their purpose. Crown Automotive replacement wheel bearing seals will prevent fluid from leaking, while they protect your wheel bearings from dust and debris. To ensure that your wheels are operating at peak efficiency, get your premium direct fit seals from Crown. They're available for a variety of make/model applications.
( 4 )
$2.99
—
$7.99
Crown Automotive engine separator plates are direct OE-replacement Jeep parts. These bellhousing to engine spacer plates are constructed from steel with a natural finish. Crown Automotive has long been the leading manufacturer and distributor of replacement parts for Jeeps, as well as some Chrysler and Dodge aftermarket parts.
( 2 )
$16.99
No matter what decade your Jeep rolled off the assembly line, it goes without saying that you shift gears early and often. When your clutch linkage components begin to show their age, Crown Automotive offers a large selection of replacements--such as adjusters, springs, pedal rods, yokes, clevises, bellcrank bearings, and bushing clips. These parts are precision-manufactured from quality materials to provide the correct fit and function for specific models.
( 1 )
$2.99
—
$19.99
Flywheel ring gears can easily be replaced on your manual transmission for a lot less money than the entire flywheel. Crown Automotive has the OE-style flywheel ring gears which will allow your starter to get the engine spinning. If the pinion teeth don't mesh cleanly with the ring gear, it will cause accelerated wear on your flywheel and starter. Heavy-duty steel gears from Crown will get you moving again at peak performance.
( 1 )
$23.99
Crown Automotive shift rod poppet springs keep the shift rail in place. These Jeep manual transmission synchronizer springs are quality components from a trusted name in Jeep replacement parts. Verify attributes for proper fitment and transfer cases noted above.
( 1 )
$2.99
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$22.99
—
$79.99
Crown Automotive U-joint bolts are the perfect fasteners for your U-joint straps. These strong specialty bolts are available in different head configurations, and may serve other purposes, as well. Crown has the small items to service, repair, and restore your Jeep, Chrysler, Plymouth, and Dodge vehicles.
Not Yet Reviewed
$1.99
Restore smooth operation to your clutch with Crown Automotive clutch cables. When worn, your cables may stick, catch, bind, or fray and break. The construction of these OE-style replacement parts will provide better friction, heat, and collapsibility defense.
( 2 )
$24.99
Crown Automotive clutch fork return springs will provide OE fitment and function. The proper movement and pressure of your clutch components depend on the many springs involved. No matter which throwout fork or lever springs you need for your classic rig or newer ride, Crown can help keep your clutch in optimum operation for smoother shifts. Choose your replacements from the selection of Crown clutch return springs for improved performance.
( 17 )
$3.99
Crown Automotive differential shim kits are precisely machined per specs for each individual application to ensure your differential is lined up correctly. These carrier shims adjust the ring and pinion backlash and set differential bearings preload. Crown parts are vehicle-specific, so refer to the notes and applications for the kits you need.
( 1 )
$15.99
—
$77.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
