Availability
Contamination, leakage, and age are all factors that can lead to transmission and filter issues. Crown Automotive transmission filters are designed and built to OEM specs for easy fitment and reliable service. Old or contaminated transmission oil can cause major issues for the transmission. Crown Automotive transmission filters are available in various styles for direct fitment on many vehicles, including submodels from Jeep, Chrysler, Dodge, and Ram. Units are sold individually—or as a kit with gaskets. Encourage better performance with high-quality filters from Crown!
( 2 )
$42.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$9.99
—
$175.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 26 )
$46.99
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 31 )
$11.99
—
$24.99
Crown Automotive automatic transmission shift solenoids will efficiently control the flow of transmission fluid and restore smooth gear changes. Covering Jeep, Chrysler, and Dodge vehicles, they are built from quality materials and with fit and function just like the originals. No hardware is included; reuse existing hardware.
Not Yet Reviewed
$69.99
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$6.99
—
$21.99
Crown Automotive driveshaft components are available for maintaining many driveshaft applications when replacement hardware is needed. Order the parts designed for fitment on your make and model.
( 3 )
$7.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 92 )
$128.99
—
$162.99
Crown Automotive differential cover plugs will replace your worn or missing fill and drain plugs. These covers are available in various materials and head styles. They're designed to retain the fluid, and can be ordered for front and/or rear axle differentials on a variety of models from makers such as Jeep, Dodge, Chrysler, and Mitsubishi. Why endure leaks on the driveway? When your cover plugs begin to show their age, simply upgrade with affordable replacements from Crown!
Not Yet Reviewed
$3.99
When clutch master cylinder seals go bad, you will get everything from a mess in the engine compartment to shifting issues, and eventually complete failure. Crown Automotive clutch master cylinders are direct replacements for the OE models for easy installation and longevity. They are constructed from durable plastic and metal materials, and they install with the existing hardware. Many clutch issues revolve around leaking master cylinder seals. When your vehicle's clutch master cylinder starts having issues, turn to Crown Automotive for the correct fix.
( 3 )
$68.99
—
$118.99
Your vehicle can't go anywhere without wheels. Crown Automotive wheel hub assemblies get your wheels bolted up for smooth rolling. They have a selection to fit a range of applications, and all offer steel construction in direct replacement designs. Crown wheel hub assemblies ensure a good fit and lasting durability to take you wherever you want to go.
( 4 )
$69.99
—
$82.99
When your vehicle's transmission starts shifting a little rough, it may be the fault of the accumulator. Crown Automotive accumulator piston seals will help complete new installations, keeping fluids where they belong. These seals are designed and built to OEM specs for reliability and direct fitment.
Not Yet Reviewed
$4.99
Crown Automotive disconnect axle replacement components are available to ensure that your vehicle will disengage the front drive axle when you switch from 4WD to RWD or 2WD. If these parts should fail and you are stuck in the wrong drive, restore your front-wheel spin and reduce rolling resistance with quality components--axle shift collars, shift forks, hardware, and gaskets--from Crown for complete axle disconnect service.
( 3 )
$5.99
Differentials are the unsung heroes of vehicle performance. Some are open, while others have Trac-Loks, and a few are lockers. Crown Automotive differential carrier rebuild kits are designed and built to keep them working properly. Built to OEM specs for excellent fit and reliable performance. They provide the necessary parts to update each differential and keep power going where it belongs. Differentials put their all into transferring power from the transmission to the axles. When they decide to take a break, put them back to work with Crown Automotive differential carrier rebuild kits.
( 3 )
$123.99
That strange noise you hear when cornering or making sharp turns may be a telltale symptom of worn-out bearings. Crown Automotive wheel bearing and hub assemblies allow you to repair these crucial safety and handling components with quality replacement units. Return to the handling and performance you expected when the vehicle rolled off the factory line. These assemblies are available in numerous variations for fitment on a wide variety of makes and models.
( 3 )
$48.99
—
$99.99
Proper support for your driveshaft is a must. Crown Automotive driveshaft carrier bearings are quality-constructed to offer your ride renewed, quiet performance with an easy installation. They provide the fit and function of your vehicle's original components.
( 1 )
$66.99
With all of the horsepower and torque being transferred to differentials, it's amazing how long they last. Crown Automotive differential carrier replacement parts are designed to get your vehicle moving down the road and trail again. These parts are designed and built to OEM specs for excellent fit and reliable performance.
Not Yet Reviewed
$5.99
Fix your light issues with Crown Automotive neutral and backup safety switches, direct replacements for your original equipment at a reasonable price. Neutral safety switches prevent the vehicle from starting when in any other gear besides "Neutral" and "Park"—and they double as a backup light switch. Backup switches can make other drivers aware of your intentions when you shift into reverse. These small replacement units help to prevent accidents which may occur if your old switches become loose or have degraded over time. Crown safety switches are available in various styles for fitment on numerous makes and models.
( 17 )
$34.99
Whether you're doing preventive maintenance or you hear that old familiar whine, turn to Crown Automotive differential carrier bearings to help restore a quiet ride. These oil bath bearings will keep differentials or axles spinning straight down the path. Crown differential carrier bearings are sold individually or as a kit, and are available for a wide range of vehicles.
( 4 )
$15.99
—
$33.99
Bearings and races go together like hamburgers and buns; one isn't complete without the other. Anytime you're replacing bearings, you should also replace the races with units from Crown Automotive. They are designed and built to OEM specs for excellent fit and reliable performance. Their smooth, machined inner surface provides minimal drag for the bearings. When your vehicle's carrier bearings and races need replaced, look to Crown for quality replacement products..
( 1 )
$19.99
Whether large or small, Crown Automotive transmission bearing races must be the correct type and size to handle the loads they will experience. These direct-fit replacement parts are built to OE specifications. Check the applications for your proper fitment.
Not Yet Reviewed
$18.99
Crown Automotive automatic transmission differential bearing races are premium bearing cups designed to match OEM specifications. They are precision manufactured for outstanding durability and performance. The bearing races are available for a wide variety of transmission types—as well as vehicle makes and models, such as Chrysler, Dodge, and Plymouth.
Not Yet Reviewed
$12.99
Crown Automotive automatic transmission bearings are high-quality replacements designed to help your transmission operate at peak performance. Transmissions have several bearings required for smooth function, and Crown offers direct-fit units for a variety of year, make, and model vehicles.
Not Yet Reviewed
$48.99
Crown Automotive knows that wheel bearings can eventually wear out. If you notice excessive play or noise—especially when cornering—and adjustment doesn't fix the problem, the wheel bearings and seals in your Jeep may need replaced. Because wheel bearings are a vital part of your vehicle's suspension, if they become worn or damaged, maintenance should be performed as soon as possible. Crown is a name you can trust for quality automotive parts for numerous vehicles.
( 5 )
$15.99
—
$80.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
