Availability
Crower cutaway severe-duty roller lifters are a must for high-pressure, high engine rpm applications. These mechanical roller lifters feature a special alloy body, a lightweight design, and a heavy-duty blade that has been moved up to fit late model blocks. They are available in standard or offset sizes. Order the model designed for your specific application.
( 16 )
$138.99
—
$1,135.99
If high spring pressures or extreme operating conditions have you worried about lobe scuff and lifter wear, then these Crower Camsaver hydraulic lifters are for you. They deliver 20 to 30 percent more oil to your lobe and lifter faces for the best possible insurance against premature lobe and lifter failure. These flat tappet styles are available in a variety of outside diameters for proper fitment on specific applications.
( 63 )
$15.99
—
$179.99
These proven rollerized rockers from Crower are made from 17-4PH stainless steel with 1025 heat treating. They feature premium oversized needle bearings, sure-lock rocker nuts, and alloy steel tip rollers. Their superior, lightweight body design provides plenty of clearance for large-diameter springs.
( 24 )
$85.99
—
$1,057.99
Many of the late model blocks have taller lifter bores, which means standard seat height lifters with an offset require manual notching of the lifter bore for pushrod clearance. Crower developed a lifter with a +.300 in. higher pushrod seat to solve this problem. Crower Dart block raised seat roller lifters are taller to clear lifter bore and have lightweight billet alloy bodies paired with a robust stainless steel alignment blade. They feature High-Pressure Pin Oiling (HIPPO), allowing more oil to be delivered to critical high-load areas for greatly improved cycle life.
( 1 )
$1,090.99
Crower polylocks for roller-tip, needle-bearing rocker arms are made from high quality, heat treated chromoly steel. These Crower sure lock nuts allow for precise adjustments. They include nuts and Allen head set screws for positive jam nut operation.
( 38 )
$55.99
—
$78.99
These roller lifters from Crower deliver 200 percent more life expectancy than competing brands. They feature crowned bearings and crowned outer races that greatly reduce lobe tracking.
( 5 )
$680.99
—
$904.99
These solid lifters from Crower help to avoid premature lobe wear and ensure long cam and lifter life. They feature precision-ground radius faces and finishes for fast break-in and trouble-free operation.
( 15 )
$123.99
—
$246.99
Crower lash caps protect the ends of your valves from excessive wear and help to correct rocker geometry by increasing rocker arm to retainer clearance. Machined from high-grade chromoly steel and heat-treated for added strength, they give your valves an added .060 in. margin of protection. Highly recommended for performance applications, they're a must for costly stainless steel or titanium valves.
( 4 )
$78.99
—
$93.99
Crower severe-duty roller lifters are designed for full race applications. They feature a special alloy body, and some feature a larger O.D. bearing. These larger bearings have a thicker wall than the standard designs, in order to withstand today's high cylinder pressure and high-impact camshafts. The lifters are available in a variety of diameters and offsets for fitment on specific vehicles and engines.
( 4 )
$1,004.99
Keep your lash consistent with rocker arm lash adjuster screws from Crower.
Not Yet Reviewed
$31.79
Crower performance valve springs are available for a variety of applications. Proper valve springs are essential to valvetrain performance, when matched with the right cam. With Crower valve springs, you can get the performance you want at a price you'll like.
( 18 )
$165.99
—
$237.99
Crower hydraulic lifters feature ball-check oil control valving, precision radius faces, and quick break-in. New lifters must be used when installing a new camshaft, to avoid premature lobe and lifter wear. These flat tappet styles are available in a variety of outside diameters. Order the model that best suits your application.
( 20 )
$15.99
—
$172.99
Crower billet performance 7 degree valve stem keepers are precision-machined from premium billet bar stock chromoly steel. They are heat-treated for maximum strength to prevent shoulder shearing (common with stock and lesser-quality keepers). In addition to standard height, They offer .050 in. higher and .050 in. lower keepers to achieve the correct installed spring height. Each variation is color-coded for identification. Serious engine builders should have a complete selection of Crower billet performance 7 degree valve stem keepers on hand at all times.
( 13 )
$75.99
—
$84.99
Wear and tear on valve springs from today's aggressive camshafts can cause you to lose height and tension, equaling loss of power. Crower copper plated and case-hardened valve spring shims will take a pounding while achieving proper spring install height to keep you moving. Crower valve spring shims are available in single or assorted thickness sets.
( 2 )
$106.99
—
$107.99
Crower Coolface solid lifters feature a small-diameter .024 in. metering port that is precision-machined in the face of the lifter. They will provide longer camshaft and lifter life with no loss of oil pressure. These lifters are designed to eliminate lobe and lifter wear caused by inadequate lubrication at the cam and lifter surface. With today's high-rpm, high rocker arm ratio and high spring pressures, cam and lifter failure is at an all-time high. To make sure that you don't experience any problems, install Crower Coolface solid lifters for maximum reliability. They're available in a variety of diameters for fitment on specific vehicle and engine applications.
( 5 )
$19.99
—
$201.99
Crower Jumbo Split-Lock 10 degree valve stem keepers are machined from chromoly steel, heat-treated for maximum strength, and designed with a 10 degree taper. They are twice the strength of conventional 7 degree valve stem keepers and are available in various heights for added flexibility in achieving the correct installed spring height.
( 5 )
$7.99
—
$81.99
Crower Power Compu-Pro camshafts offer more power with an extended rpm range for your stock or near-stock engine, plus enhanced mileage. These camshafts show strong low-end and midrange power for spirited driving on or off-road. Crower uses USA-milled materials in their manufacturing and, with 55 years of experience and know-how, produces superior performance cams. When you need power, Crower has the cams with the performance levels and specs to build a successful vehicle package.
( 7 )
$369.99
—
$403.99
Crower Ultra Beast performance Level 4 cams feature a profile that delivers upper midrange to top-end horsepower. Designed for heavily modified engines, using an aftermarket torque converter or 4-speed manual transmission, these cams have a definite lope at idle, and will supply all of the power that you need!
( 1 )
$309.99
Crower hydraulic roller lifters combine the performance level of a roller lifter with the reliability of a hydraulic lifter. They feature a completely redesigned body and bearing—and can be retrofitted for earlier-style blocks in some applications. The lifters are available in various diameters for fitment on makes/models and engines.
( 3 )
$38.79
—
$1,006.99
Crower stud mount self-aligning rocker arms are available for late model small and big block Chevy, Dodge, Magnum trucks, and the V10 Viper. Features include: * Self-aligning roller tip to hold rocker in place * Emissions-legal certified ARB #D-410
( 6 )
$82.99
—
$1,263.99
Crower rocker arm stands are available for Crower shaft-mounted rocker systems. These replacement base stands are available for several cylinder head brands and each stand has a stamped identification number to reference, ensuring it will be the correct part for your system. Support your rocker arm shafts with Crower shaft rocker mounting stands.
Not Yet Reviewed
$382.99
Crower camshaft accessory kits offer you an easy, cost-saving method of ensuring that your cam is matched with the correct components. These valve springs will help engines by releasing some of the horsepower that the stock components are holding back. They're heat-treated and can be installed in most cylinder heads with no machining. The kits include valve springs and retainers. Depending on your application, these kits may also include locks, matching lifters, pushrods, and valve stem seals. Dozens of models and options are available; order the kit designed for your vehicle and engine application.
( 2 )
$251.99
—
$554.99
Crower Compu-Pro Performance Level 1 camshafts deliver the mileage. Their enhanced throttle response and low-end torque with fuel-efficient motoring make them great stock replacements. Whether you drive a car or truck, you can step up the performance and pass a few pumps with Crower Compu-Pro.
Not Yet Reviewed
$295.99
Crower's valve spring retainers are made of high-quality steel and are machined and heat-treated for strength. They have a black oxide finish to guard against the damaging effects of rust and corrosion.
( 3 )
$104.99
—
$188.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
