Availability
Competition Engineering understands that it takes more than just horsepower to perform. We’re talking about traction—getting all that power to the pavement! That’s where...
Competition Engineering understands that it takes more than just horsepower to perform. We’re talking about traction—getting all that power to the pavement! That’s where CE’s CAD/CAM-designed, track-tested chassis and suspension components come in. From street machine parts that bolt on quickly just like the originals, to hardcore race parts built to handle extreme forces, Competition Engineering has you covered. CE manufactures roll cages, frame connectors, shocks, struts, ladder bars, anti-roll bars, mounting solutions, and even custom rear frame kits, all shaped by decades of on-track experience.
Competition Engineering understands that it takes more than just horsepower to perform. We’re talking about traction—getting all that power to the pavement! That’s where CE’s CAD/CAM-designed, track-tested chassis and suspension components come in. From street machine parts that bolt on quickly just like the originals, to hardcore race parts built to handle extreme forces, Competition Engineering has you covered. CE manufactures roll cages, frame connectors, shocks, struts, ladder bars, anti-roll bars, mounting solutions, and even custom rear frame kits, all shaped by decades of on-track experience.
Competition Engineering rod ends are available in a number of sizes, in both right-hand and left-hand threads, and all come with jam nuts. Their all-steel bodies are available in low-carbon, chromoly, or forged steel. Competition Engineering highly recommends that you use chromoly rod ends exclusively with their 4-link and ladder-bar suspension kits, with polyurethane-lined types reserved for street applications with ladder bars. Forged-steel types are not recommended for the front points of 3 or 4-link suspensions. Their Magnum series chromoly rod ends are the best choice for ladder bar and 4-link applications. They are self-lubricating and self-sealing with increased thickness for greater tensile strength--perfect for demanding motorsports applications. When loaded, Magnum rod ends create metal-to-metal contact for unsurpassed strength, yet when unloaded, the Rilsan AZM30-injected liner will not rattle or squeak like standard 2 or 3-piece rod ends.
( 48 )
$15.99
—
$50.99
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 238 )
$74.99
—
$120.99
While the stock rear suspension in your ride may be adequate for stock engines and street tires, it just isn't going to cut it when you increase horsepower. What you need is Competition Engineering's leaf spring traction bars. Perfect for stock eliminator and bracket cars, they eliminate wheel hop and improve traction by applying the force that normally produces unwanted axle rotation into a downward force, making the tires stick to the pavement. They're constructed from heavy-gauge 2 1/2 x 1 1/2 x .120 in. wall steel tubing, and are fixture-welded to ensure a perfect fit for each application. Plus, they will handle up to 450 tire-shredding horsepower and include all materials required for installation.
( 24 )
$290.99
—
$305.99
Competition Engineering seat back braces stem from the reality that in a fraction of a second, anything can happen while racing. By tying your seat into the sturdy roll cage, it'll stay in place under heavy acceleration, braking, cornering, and damaging situations. These braces use a 3 in. by 6 in. backing plate for attachment to the back of non FIA-approved seats; they can also be used on approved seats for added support. The braces feature a locking collar to allow the seat to move back and forth, and no welding is required for installation. A well-built roll cage is the safest part of a vehicle--keep your seat attached the frame with a Competition Engineering back brace kit.
( 22 )
$144.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 159 )
$228.99
—
$535.99
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$171.99
—
$408.99
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$314.99
—
$740.99
Racers know that wheel stands look spectacular but hurt performance. Competition Engineering's Wheel-E-Bars control wheel stands without unloading the rear tires, putting more power into moving the car forward. These bars feature upper spring adjusters made from 7075-T6 aluminum for easy preload adjustment, lower 6061-T6 aluminum struts for fatigue resistance, and natural rubber wheels with aluminum ball-bearing hubs. The kits also include all fasteners and quick-release pins for easy access to the rear housing.
( 18 )
$546.99
—
$646.99
Competition Engineering parachute release systems give you everything you need to pull your parachute correctly. They include an 18 ft. cable, an aluminum release lever, and the required mounting hardware. Just add the parachute, and you're on your way to rapid deceleration.
( 1 )
$143.99
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$106.99
—
$181.99
Competition Engineering designed these bars specifically for the street enthusiast. Using the same components as its Professional Wheel-E-Bars, Competition Engineering designed bolt-on mounting brackets to replace the harder-to-install weld-on brackets.
( 19 )
$599.99
Designed to eliminate side-to-side movement of the rear axle housing, Competition Engineering panhard bars keep your tires from hitting the wheelwells and allow the car to run straight down the track. The 30 in. long bars can be trimmed to fit most applications and include gusseted mounting brackets, spherical rod ends, hardware, and instructions.
( 20 )
$156.99
Competition Engineering cable-style front-end travel limiters are designed to fit both A-arm and strut front suspensions. Their 7-position adjuster enables you to fine-tune front-end separation, improving 60 ft. times as well as vehicle reaction time. These kits include weld-on mounting tabs, cable assemblies, mounting hardware, and detailed instructions.
( 4 )
$103.99
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$274.99
—
$680.99
These Competition Engineering swing-out door bar kits feature a release pin and hinge bracket to help you get in and out of your roll-bar equipped car easily--no more crawling over the bars to get in! They are made from 1 5/8 in. x .134 in. wall mild steel tubing. Check with your sanctioning body for regulations on using this setup.
( 39 )
$68.99
Designed to eliminate wheel hop and parts breakage, these coil spring traction bars from Competition Engineering will withstand increased power levels and improve drag-style launches in GM intermediates. Other features include 2 in. x 2 in. x .120 in. wall steel tubing construction for strength, threaded links for infinite adjustability, mandrel-formed brackets to ensure a perfect fit, and all necessary mounting hardware. They also come in your choice of a black powdercoated or triple chrome plated finishes.
( 10 )
$377.99
Competition Engineering Standard Series 4-link kits provide rear suspensions that will give you the freedom to make incremental changes in your car's point of instant center (the adjustable point that determines weight transfer), for head-snapping launches. Designed for flexibility of adjustment to suit an individual car's characteristics, these kits allow custom installation to a particular application. Gain increased adjustability over ladder bar suspensions with Competition Engineering Standard 4-link rear suspensions. Standard kits include: * Direct threaded seamless steel tube links * Permanently mounted adjusting nuts for quick tuning * Stamped cold rolled steel brackets * Chromoly spherical rod ends * Grade 8 fasteners and jam nuts
( 22 )
$377.99
Competition Engineering mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .188 in. thick 6061-T6 aluminum or .090 in. thick mild steel, they allow easy transmission swaps and help align the drivetrain for trouble-free operation. They include universal frame mounts and hardware.
( 24 )
$73.99
—
$256.99
Designed to stabilize ladder bar and 4-link suspensions, these Competition Engineering diagonal links connect the front mounting bracket of a ladder or 4-link to the rear housing mounting bracket on the opposite side. They include left and right-hand threaded rod ends to allow for on-car adjustments. These links can be trimmed to fit narrow rear-ends, and come complete with all of the necessary brackets and hardware.
( 17 )
$120.99
—
$213.99
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 36 )
$88.99
—
$269.99
Competition Engineering flywheel and flexplate shims are manufactured out of high-quality 0.090 in. steel stock. They can be used anytime that the spacing of the torque converter to the transmission pump needs adjustment, most commonly found when using mid-mount motor plates. If you're looking for flywheel and flexplate shims, Competition Engineering has you covered.
( 9 )
$37.99
—
$39.99
Competition Engineering universal tow hooks are made from 3/16 in. zinc plated steel for durability and feature a 2 in. diameter opening. They can be welded or bolted on and can even be used for trailer tie-down points.
( 13 )
$29.99
—
$62.99
Mount your ladder bars to the axle tube with these Competition Engineering replacement ladder bar housing brackets. They're manufactured from quality steel and include special gussets that are designed to be welded directly to the axle tube for extra reinforcement.
( 8 )
$86.99
Competition Engineering bump steer kits are designed for vehicles that have been raised or lowered and have unwanted toe changes and bump steer during suspension travel. These fully adjustable kits replace non-adjustable stock components with precision, aircraft-quality components that bolt into place with common hand tools. Made from a strong billet aluminum these kits are built to perform.
Not Yet Reviewed
$158.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
