Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Competition Engineering Leaf Spring Traction Bar Kits
While the stock rear suspension in your ride may be adequate for stock engines and street tires, it just isn't going to cut it when you increase horsepower. What you need is Competition Engineering's leaf spring traction bars. Perfect for stock eliminator and bracket cars, they eliminate wheel hop and improve traction by applying the force that normally produces unwanted axle rotation into a downward force, making the tires stick to the pavement. They're constructed from heavy-gauge 2 1/2 x 1 1/2 x .120 in. wall steel tubing, and are fixture-welded to ensure a perfect fit for each application. Plus, they will handle up to 450 tire-shredding horsepower and include all materials required for installation.
( 24 )
$311.99
—
$327.99
Competition Engineering Formed Rear Frame Rails
Competition Engineering formed rear frame rails adds some beef to your suspension. The "chassis people" have designed and manufactured these to replace the stock sheet metal rear rails in your subframe equipped car. CE's rails are mandrel-formed 2 in. x 3 in. x .083 in. wall mild steel tube that will increase the chassis strength for quicker vehicle reaction times. Plus, they have been engineered to move the leaf springs and frame rails inboard to provide additional tire clearance. Strengthen your suspension to put more power to the pavement utilizing a pair of Competition Engineering formed rear frame rails. Additional information: * Designed to fit stock floor contours with minor fabrication * Requires use of a fuel cell, rear fenderwells and an upper shock crossmember * Use with Competition Engineering weld-in subframe connectors * Two rails and hardware per kit
( 16 )
$416.99
—
$431.99
Competition Engineering Bolt-On Frame Connectors
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$303.99
Competition Engineering 8-Point Complete Roll Cage Kits
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 38 )
$407.98
Competition Engineering Coil Spring Traction Bars
Designed to eliminate wheel hop and parts breakage, these coil spring traction bars from Competition Engineering will withstand increased power levels and improve drag-style launches in GM intermediates. Other features include 2 in. x 2 in. x .120 in. wall steel tubing construction for strength, threaded links for infinite adjustability, mandrel-formed brackets to ensure a perfect fit, and all necessary mounting hardware. They also come in your choice of a black powdercoated or triple chrome plated finishes.
( 10 )
$404.99
Competition Engineering 12-Point Roll Bar Strut Kits
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
Competition Engineering Front Motor Plates
Keep your engine from twisting in the chassis! Competition Engineering front motor plates provide a solid connection between your engine and chassis, eliminating movement and helping to improve reaction times. These motor plates are made from 1/4 in. thick 6061-T6 aluminum and are computer-designed and machined. They're perfect for engine swaps or for setting the motor back in the chassis for increased weight transfer.
( 30 )
$277.99
Competition Engineering 12-Point Roll Bar Main Hoop Kits
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$384.99
—
$389.99
Competition Engineering 10-Point Roll Bar Main Hoop Kits
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$343.99
Competition Engineering 8-Point Roll Bar Main Hoop Kits
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$279.99
—
$285.99
Competition Engineering Mid-Mount Plates
Competition Engineering mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .188 in. thick 6061-T6 aluminum or .090 in. thick mild steel, they allow easy transmission swaps and help align the drivetrain for trouble-free operation. They include universal frame mounts and hardware.
( 24 )
$259.99
Competition Engineering 10-Point Roll Bar Strut Kits
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$437.99
