Availability
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$311.99
—
$330.99
Competition Engineering Standard Series 4-link kits provide rear suspensions that will give you the freedom to make incremental changes in your car's point of instant center (the adjustable point that determines weight transfer), for head-snapping launches. Designed for flexibility of adjustment to suit an individual car's characteristics, these kits allow custom installation to a particular application. Gain increased adjustability over ladder bar suspensions with Competition Engineering Standard 4-link rear suspensions. Standard kits include: * Direct threaded seamless steel tube links * Permanently mounted adjusting nuts for quick tuning * Stamped cold rolled steel brackets * Chromoly spherical rod ends * Grade 8 fasteners and jam nuts
( 22 )
$404.99
Drive straighter off the starting line and improve 60 ft. times. Competition Engineering Magnum series anti-roll bars are designed to eliminate body roll during hard launches at the drag strip. They feature formed, heavy-gauge frame mounts, enabling you to install the torsion tube through the frame rails for increased strength. Billet aluminum arms are attached with special incorporated splines to prevent the arms from slipping on the torsion tube. Additional features include: * 4130 chromoly torsion tube * 2 adjustable splined billet aluminum arms * 2 mounting brackets * 2 adjustable links * 4 rod ends * 4 weld-in threaded adjusters * 2 flange mounted bearings * Installation hardware
( 14 )
$493.99
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$337.99
—
$365.99
Designed to eliminate wheel hop and parts breakage, these coil spring traction bars from Competition Engineering will withstand increased power levels and improve drag-style launches in GM intermediates. Other features include 2 in. x 2 in. x .120 in. wall steel tubing construction for strength, threaded links for infinite adjustability, mandrel-formed brackets to ensure a perfect fit, and all necessary mounting hardware. They also come in your choice of a black powdercoated or triple chrome plated finishes.
( 10 )
$404.99
Competition Engineering formed rear frame rails adds some beef to your suspension. The "chassis people" have designed and manufactured these to replace the stock sheet metal rear rails in your subframe equipped car. CE's rails are mandrel-formed 2 in. x 3 in. x .083 in. wall mild steel tube that will increase the chassis strength for quicker vehicle reaction times. Plus, they have been engineered to move the leaf springs and frame rails inboard to provide additional tire clearance. Strengthen your suspension to put more power to the pavement utilizing a pair of Competition Engineering formed rear frame rails. Additional information: * Designed to fit stock floor contours with minor fabrication * Requires use of a fuel cell, rear fenderwells and an upper shock crossmember * Use with Competition Engineering weld-in subframe connectors * Two rails and hardware per kit
( 16 )
$416.99
—
$461.99
With Ladder Link bars from Competition Engineering, you can fine-tune the suspension without taking the bars off of your vehicle. These bars won't bind like other bars, either, because of the dual-pivoting adjustable lower links. The bars are made of steel tubing for strength. They also have high-quality spherical front rod ends and forged solid rear rod ends.
( 9 )
$517.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$250.99
—
$499.99
These Competition Engineering universal frame rails provide the perfect foundation for just about any race suspension. Available for 4-link and ladder bar suspensions, these mandrel-bent rails provide solid mounting for your suspension and rear axle components, while allowing you to run a low ride height or taller race tires.
( 7 )
$417.99
—
$499.99
While the stock rear suspension in your ride may be adequate for stock engines and street tires, it just isn't going to cut it when you increase horsepower. What you need is Competition Engineering's leaf spring traction bars. Perfect for stock eliminator and bracket cars, they eliminate wheel hop and improve traction by applying the force that normally produces unwanted axle rotation into a downward force, making the tires stick to the pavement. They're constructed from heavy-gauge 2 1/2 x 1 1/2 x .120 in. wall steel tubing, and are fixture-welded to ensure a perfect fit for each application. Plus, they will handle up to 450 tire-shredding horsepower and include all materials required for installation.
( 24 )
$311.99
—
$327.99
These universal kits from Competition Engineering come with 3-way adjustable shocks, upper mounts, and adjustable lower mounts. They work with a variety of applications, including drag race, Pro Street, street rods, and kit cars. The upper mounts are finished in black oxide for welding. The lower mounts have 6 in. of adjustability. The spring perches are finished with a zinc and yellow chromate plating for corrosion resistance. They are designed for use with Competition Engineering rear coilover springs; replacement shocks are sold separately.
( 15 )
$383.99
—
$482.99
These Universal Wheel-E-Bar kits allow the professional chassis builder to fabricate bars to fit a specific vehicle. Each kit is available in your choice of sprung or unsprung versions. The 60 in. long tubes can be cut to the desired length to suit individual needs. As an added feature, each kit includes the necessary material to install an upper cross brace for increased strength.
( 4 )
$532.99
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$407.98
—
$454.99
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$524.98
—
$534.98
Made for race cars with tube-style chassis, these universal race steering column kits from Competition Engineering feature 3/4 in. x .058 in. wall chromoly steel shafts for lighter weight without sacrificing strength. The inner shaft rides in two flanged polymer bushings that mount to a 1 1/2 in. diameter 6061-T6 aluminum tube. Other features include grease fittings, a stop collar, an SFI-approved quick-release steering hub, a precision needle bearing U-joint, and installation instructions. Kit contents: * Two 36 in. long, 3/4 in. diameter smooth shafts * 24 in. hollow tube * Two nylon shaft centering bushings * Single bolt pinch/stop collar * 1 in. hex steering hub adapter * Quick release steering hub, 3 bolt pattern * 3/4 in. smooth bore U-joint * Instruction sheet
( 2 )
$373.99
Competition Engineering floating housing mounts are designed for ladder bar rear suspensions using leaf springs. By allowing the axle to pivot independently of the leaf springs, they eliminate the binding of the rear suspension due to the opposing travel arcs of the ladder bars and leaf springs as the axle moves up and down.
( 2 )
$276.99
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$374.99
—
$415.99
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
These Competition Engineering aluminum fenderwells are beaded at the seams to give them extra strength, and are made of 0.032 in. aluminum. These fenderwells allow for plenty of clearance, even on 15 and 16 in. Pro Stock tires.
Not Yet Reviewed
$250.99
—
$370.99
Keep your engine from twisting in the chassis! Competition Engineering front motor plates provide a solid connection between your engine and chassis, eliminating movement and helping to improve reaction times. These motor plates are made from 1/4 in. thick 6061-T6 aluminum and are computer-designed and machined. They're perfect for engine swaps or for setting the motor back in the chassis for increased weight transfer.
( 30 )
$277.99
—
$392.99
Competition Engineering wishbone rear axle locators are designed to eliminate any sway in a ladder bar or 4-link system. They include 3/4 in. forged solid steel rod ends, steel or chromoly tubing, and installation brackets and hardware. The rear axle locators are available in both welded and un-welded versions, but will require welding for installation to the vehicle and rear-end housings.
( 5 )
$314.99
These Summit Racing™ front coil spring and drag shock Pro Packs will help you get those consistent ETs that you need at the track. They include a set of front coil springs that are available in different spring rates for different vehicle weights. Plus, you get a set of front and rear adjustable drag shocks, so you can choose the valving that is best for your specific application. Quicker, more reliable starting line launches are here--pick up one of these Summit Racing™ front coil spring and drag shock Pro Packs to get the job done.
( 1 )
$491.95
—
$539.95
Competition Engineering anti-roll bar kits make it possible for you to preload the chassis, eliminating body roll during hard launches. This allows the car to drive straighter off the starting line, helping to improve 60 ft. times.
Not Yet Reviewed
$522.99
Competition Engineering mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .188 in. thick 6061-T6 aluminum or .090 in. thick mild steel, they allow easy transmission swaps and help align the drivetrain for trouble-free operation. They include universal frame mounts and hardware.
( 24 )
$259.99
—
$274.99
Modal Header