Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
COMP Cams Ultra Pro Magnum Rocker Arms
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 206 )
$45.95
—
$46.95
COMP Cams High Energy Hydraulic Roller Lifters
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 81 )
$38.95
COMP Cams Valve Seals
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 194 )
$38.95
COMP Cams Rocker Stud Remover and Tap Guides
Remove pressed-in rocker studs and tap for screw-in studs with these rocker stud puller and tap guides from COMP Cams. To remove pressed-in rocker studs, slide the rocker stud puller over two side-by-side studs, and then crank down on the retaining nut to force out the stud. Use the tool with the included tap guide to ensure proper alignment when tapping the stud boss for screw-in studs.
( 11 )
$47.95
COMP Cams Engine Plug Kits
COMP Cams have put together their engine plug kits because they understand it's easy to forget the little things. Ordering this one part number will supply you with all the plugs needed to seal the water and oil chambers in your LS engine. The plugs are made from brass and galvanized steel to resist corrosion, and will last for years without rusting or becoming stuck in your engine block. When building an LS engine, your primary focus is the major components—camshafts, cylinder heads, and like power makers. You don't want to overlooked the smaller, but also important, parts to complete your build. COMP Cams hasn't; pick up one of these engine plug kits and be ready to finish what you've started.
( 2 )
$49.95
COMP Cams Lifter Guides
Keep your lifters properly positioned with COMP Cams lifter guides. They're available in a variety of materials and configurations for many Chevrolet, Chrysler, Dodge, Jeep, and Ram applications from 1985 and up.
( 1 )
$39.95
COMP Cams Camshaft Phaser Disassembly Wrenches
Before installing the COMP Cams 5455 spring limiter tool, it's necessary to compress the variable valve timing spring. These camshaft phaser disassembly wrenches compress the spring—so you can install the 5455 limiter tool and then the 5457 or 5459 phaser limiter plug. Order the wrench recommended for your year/make and engine application.
Not Yet Reviewed
$32.95
COMP Cams Pro Magnum Hydraulic Roller Lifters
COMP Cams Pro Magnum hydraulic roller lifters are specifically designed to perform at higher engine speeds. When engines are equipped with a hydraulic roller camshaft, high rpm is limited by the improper positioning of the internal piston, as the lifter inevitably "pumps up." This improper location results in broken valves and, therefore, leads to lost power or sometimes even engine failure. These lifters offer a distinct advantage over standard high performance hydraulic lifters, especially in race applications where a hydraulic lifter must be used.
( 35 )
$41.95
COMP Cams Camshaft Phaser Spring Locks
After compressing the VVT spring, this COMP Cams camshaft phaser spring limiter/lock tool (5455) is used to hold the variable valve timing spring in place while installing the 5457 phaser limiter plug. COMP Cams offers the engine timing tools needed for a variety of vehicle year/make and engine applications.
Not Yet Reviewed
$22.95
COMP Cams Evolution Series Hydraulic Roller Lifters
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 14 )
$40.95
COMP Cams Pushrod Guideplates
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 185 )
$32.95
—
$35.95
COMP Cams Sportsman Stainless Steel Valves
Featuring precision tolerances and superior final machining, COMP Cams Sportsman stainless steel valves offer outstanding performance and durability for high-rpm, high-horsepower engines. They are manufactured from 21-4N high-strength, one-piece stainless steel. They also feature a chrome polished stem, hardened tips, and high-flow underhead for minimum flow restriction. Recommended for hydraulic, mechanical, or roller lifter camshaft cylinder heads, COMP Cams Sportsman stainless steel valves provide you with the reliability and performance that you require.
( 7 )
$28.95
—
$46.95
COMP Cams Camshaft Phaser Spring Compression Tools
COMP Cams camshaft phaser spring compression tools are designed for use with COMP Cams camshaft phasers. They install easily on a 3/8 in. drive ratchet and hook onto the end of the cam phaser springs' J-bend. Simply compress the spring and insert the spring lock tool, which is sold separately.
Not Yet Reviewed
$32.95
