Availability
Cal-Van Tools Ford Triton spark plug thread repair kits are designed to add in the repairing of Ford modular cylinder heads. These patented foolproof repair systems are cost-effective and fast. Cal-Van repair kits feature a high-quality oversized steel alloy insert that will repair other inserts that fail and will have no ill effects from heat transfer.
( 18 )
$212.99
Cal-Van Tools inline dowel pin puller sets are designed to extract dowels without the use of a slide hammer. Eliminating the slide hammer saves cost—as well potential hand injury. Just use the appropriate size adapter over the dowel, tighten the sleeve, then use the outer sleeve and nut to extract the dowel. This tool set can be used with an air ratchet or traditional ratchet. Cal-Van dowel pin pullers are offered in SAE, metric, and master sets.
( 9 )
$120.99
—
$175.99
Most borescopes use mirrors to achieve alternate viewing angles. Cal-Van Tools' newest borescope utilizes dual hi-res cameras, bright LED illumination, and up to 3x zoom to give users superior viewing and video capture capabilities. Product details: * Hi-Res 1080p cameras provide front and side video and image capture * The camera, lens, and cable are IP 67 rated water resistance * Ultra-bright lighting provided by seven total LEDs * These units transmit and connect to devices via an independent Wi-Fi signal, giving them the freedom to be used everywhere * Camera diameter: .23 in. (5.7mm) * Cable length: 58 in. (147cm) * Maximum resolution: 1920x1080 * Maximum zoom: 3X * Connectivity: Wi-Fi only * Waterproof Rating: IP67 * Batttery type: Rechargeable lithium * Dimensions: 4.6 x 4 x 2
( 3 )
$126.99
Cal-Van Tools Ford Triton insert repair kits are designed to aid in the repair of a common problem in the Ford Triton family of motors. The spark plug tends to break off in the cylinder head during maintenance. If this problem is not repaired properly it can result in damaged or unusable spark plug threads, or in extreme cases the possibility of a spark plug blow out. Cal-Van Tools Ford Triton insert kits will assist you in repairing those damaged threads or blowouts in 30 minutes or less per cylinder.
( 1 )
$234.99
Cal-Van Tools master spring compressor sets are handy work companions. These 2-in-1 tools feature their two most popular spring compressors--the master MacPherson strut tool and the coil spring compressor. Each of the sets features built-in safety pins, and they include a spring gauge Acme threaded rod. All pieces are packaged in heavy-duty blow-molded cases.
Not Yet Reviewed
$108.99
Cal-Van Tools Amp Hound 2 circuit testers are amp meters for fused circuits! They are convenient, safe, and will eliminate any guesswork. Amp Hound 2 units include all the features of the original circuit testers allowing for ease of testing, and a solution for inadvertently resetting parasitic drains. Simply attach adapter to fuse, or just touch the probes to the top of the fuse. An audible tone lets you know when you are touching a fuse, making work in under-the-dash fuse boxes much easier. Cal-Van Tools Amp Hound 2 circuit testers also feature: * Real time readings of current and amps in fused circuit without removing fuse * Special fuse adapters lock on to fuse to provide hands-free control * Takes amperage readings without having to access hard-to-reach components * Works on new fuse types: mini-LP and micro-fuse, along with three of the most common automotive fuses types: mini, standard and maxi with all of the most common ranges * No chance of shorting a circuit while the fuse is removed
Not Yet Reviewed
$124.99
Cal-Van Tools 7-ton bar-type puller bearing separator sets are ready for larger applications with greater reach (8 to 16 in.). These sets include 4 in. bearing splitter, 2 sets of hex push-puller legs, and an 8 in. bar-type puller head mated with a custom thread forcing screw. Cal-Van 7-ton bar-type puller bearing separator sets come inside durable storage cases.
Not Yet Reviewed
$146.99
Cal-Van Tools front-end service kits include five tools used in the servicing of ball joints, pitman arms, and tie rods on most vehicles. These kits contain large and small Pitman arm pullers for ball joint applications, 3 different tie rod pullers, and 2 ball joint separators. Everything comes packed inside a sturdy blow-molded case.
( 1 )
$126.99
Cal-Van Tools 4WD spindle nut sockets are high-quality steel offered in 6-piece sets. They feature 1⁄2 in. square drives that enable technicians to use ratchets, breaker bars, and torque wrenches in their applications. Cal-Van Tools 4WD spindle nut socket sets come in durable blow-molded cases designed for easy organization of its contents. The sets cover the most common light truck and SUV applications. The sets include: * 4-lug socket * 6-lug socket * Toyota 4-lug lock nut socket * Ford 4-lug lock nut socket * FWD front spindle puller
Not Yet Reviewed
$138.99
Cal-Van Tools Amp Hound circuit testers are designed to drastically reduce the amount of time needed to determine the amount of current in a fused circuit. These patent-pending tools allow you to do so without removing the fuse, which not only saves you the time it takes to remove the fuse, configure the tool, read the current, and finally replace the fuse, but Amp Hound testers also solve the problem of inadvertently resetting parasitic drains. Quickly sniff out a current--in an entire fuse block--with Cal-Van Amp Hound testers! Additional features and benefits include: * Find current in all ATM, ATO, and Maxi-type fuses; most accurate on 5 to 50 amp sizes * Can detect currents as low as 5mA; easily find any parasitic drain * Audible beep instantly tells you if there is any current in any circuit, and provides no-look effortless operation * Great for under-the-dash fuse panels * Battery-operated with an automatic shut-off * Use standard test leads to touch the top of the fuse
Not Yet Reviewed
$103.99
Cal-Van Tools drain plug repair kits work with drain plugs commonly found in, but not limited to GM, Ford, and Mazda aluminum oil pans. The kits include drill bit, counter bore, tap, driver guide, insert tool, and 5 to 12mm length inserts. The inserts allow for the original drain plug to be used instead of an aftermarket plug at a different size.
Not Yet Reviewed
$116.99
The pressure's on (your hub) when you employ Cal-Van Tools' front wheel drive hub pullers to remove rusted, stubborn hubs. The heavy-duty specialty tools can be adjusted by legs to an 8 in. diameter bolt circle. Designed with forged yokes and heat-treated jaws, the hub pullers are plated—and the center screw is heat-treated and finished in black oxide. For quality automotive tools designed to maximize performance and your budget, look to Cal-Van Tools.
Not Yet Reviewed
$109.99
Cal-Van Tools U-Joint Bearing Cup Installer Tools are made from heavy-duty steel with a black finish for protection. They include two bearing cup pads, and can be used for U-joint removal and installation.
Not Yet Reviewed
$207.99
Cal-Van Tools auto body knocker sets combine a 9.5 lb. slide hammer with the most popular pulling attachments to accomplish numerous auto body repair applications. The specialized adapters provide access to tight areas and alleviate the need to remove other panels. Here are some additional product details: * Eight interchangeable attachments for pulling and straightening body panels * Provides access to hard-to-reach supports and inner structure * Drop-forged steel construction * Packaged in a robust blow-molded case Kit includes: * Chain hook * Offset blade * Claw hook * Door edge hook * Deep hook * Short hook * Slide hammer shaft * Slide hammer handle * Slide hammer adapter * Sheetmetal screw with adapter * Threaded punch with adapter
Not Yet Reviewed
$144.99
Cal-Van hydraulic inline flaring tools are lightweight, low-profile, affordable equipment. They combine the features of inline and hydraulic flare tools to increase ease-of-use, compared to both hydraulic and traditional types. The Cal-Van sets fit into tight access areas, allowing on-car use. They will make SAE and metric single, double, and bubble flares—plus, they include a constant tension tube cutter. Making poor quality flares means performing the operation again. Save yourself time and headaches; do the job once with leak-free performance using Cal-Van Tools hydraulic inline flaring tools.
( 2 )
$139.99
Cal-Van Tools Relay Circuit Pro testers can examine an entire circuit, from the battery to the component in question, as well as determining if the relay itself is functioning properly. Relay Circuit Pro units give technicians the ability to instantly determine the problem within a tested circuit. They will identify, at the push of a button, if a wire, a part, or a relay is defective without the use of a multimeter. If the technician wishes to gain more information about the problem, the tool also features easily accessible ports for use with other diagnostic tools. And since the testers can jump the relay, the technician can use them as remote control starters in engine work, like compression testing a distributor, camshaft adjusting, or to run the compressor during an A/C charge. Cal-Van patent-pending Relay Circuit Pro testers will work with both 12 V and 24 V systems, and each of them include 6 popular relay leads and a universal relay lead packed inside blow-molded cases with high-density foam inserts.
Not Yet Reviewed
$139.99
Cal-Van master disconnect kits offer a unique time saving system that makes your chores easier to accomplish. Cal-Van Tools master disconnect kits are handy work companions and will keep your disconnect needs in one place. All pieces are packaged in heavy-duty blow-molded cases.
Not Yet Reviewed
$130.99
Cal-Van Tools 5-ton bar-type puller bearing separator sets are ready to work a wide variety of pulling jobs. These sets include two popular bearing splitters (2 and 3 in.), 4 sets of hex push-puller legs, and a bar-type puller head with a 9/16 in. forcing screw. The 5 in. puller cross-bar with a 6 1/4 in. forcing screw, as well as each of the bearing separators may also be used separately, or in combination with other pullers or tools. Cal-Van 5-ton bar-type puller bearing separator sets come inside durable storage cases.
Not Yet Reviewed
$104.99
Cal-Van Tools ball joint removal and installation sets press out your problems. A full ball joint press is the most efficient, safe, and professional way to remove stubborn joints. Cal-Van sets are ready to effectively remove and install press-fit parts, such as ball joints, universal joints, and truck brake anchor pins. And, they're competitively priced—so you won't blow your budget. Cal-Van ball joint removal and installation sets include receiver tubes, cups, adapter, and C-frame tool packed in a sturdy storage case.
Not Yet Reviewed
$120.99
Cal-Van Tools axle nut socket sets feature chromoly 1/2 in. drive sockets for heavy-duty applications in removing or installing axle nuts on a wide variety of domestic vehicles and imports. Available in 6 or 12-point styles, with both packed in durable blow-molded storage cases.
Not Yet Reviewed
$105.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
