Availability
C.E. Smith offers bunk board guide-ons for marine trailers in a variety of options. Here's a capsule look at each model with the specs and options: * Model 27671: Ideal for bunk-style pontoon boat trailer with box, channel, or I-beam frames up to 3 in. wide x 4 1/4 in. tall. Pontoon glides easily past the carpeted bunk boards, guiding the pontoon boat onto the trailer. Height is adjustable and is set during install between 24 in. and 36 in. above trailer frame. Mount with bunks 2-3 in. from pontoons on a trailer frame cross member. -- Fits frames up to 3 in. wide x 4 1/4 in. tall -- U-bolt mounting brackets -- Includes two 24 in. carpeted bunk boards -- Galvanized steel construction -- Zinc plated hardware * Model 27600: Carpeted bunk boards provide proper center loading even in wind or side current conditions. -- 1 1/2 in. square pre-galvanized uprights, angled out at 75 degrees -- 2 in. x 4 in. x 24 in. boards tilt to hug the hull and are covered with high grade marine carpet -- Boards are untreated Southern yellow pine -- Height of 21 in. with adjustment out to 13 in. from frame on each side -- Can be mounted on top of frame for extra height -- Complete with mounting hardware to fit frames up to 3 in. wide x 4 1/4 in. high * Model 27660: Carpeted bunk boards provide proper center loading even in wind or side current conditions. Adjustable boat guides can be fine-tuned to work with your boat and your trailer. The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat. The bunk boards then tilt to conform to the boat's hull. Guides will help to center your boat during loading and to hold the boat during transport. -- 1 1/2 in. square pre-galvanized uprights, angled out at 75 degrees -- 2 in. x 4 in. x 60 in. boards tilt to hug the hull and are covered with high-grade marine carpet -- Boards are untreated Southern yellow pine -- Height of 21 in. with adjustment out to 13 in. from frame on each side -- Can be mounted on top of frame for extra height -- Complete with mounting hardware to fit frames up to 3 in. wide x 4 1/4 in. high
( 2 )
$99.99
—
$191.99
C.E. Smith trailer U-bolts are designed for mounting brackets and accessories to trailer frames. The zinc plated square-bend bolts are machined from Grade 5 steel and are available in a variety of lengths. They come packaged with nuts and washers to facilitate an easy, secure installation.
Not Yet Reviewed
$8.99
—
$19.99
Clearance
C.E. Smith offers marine trailer post guide-ons in a variety of styles and options. Here's a capsule look at each model: * Model 27760: These post guide-ons allow you to see the location of your trailer when it's under water. They're equipped with long-lasting, waterproof and shockproof, one-piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp—and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. -- Mounting hardware and wiring included. -- Sold in pairs -- Adjusts out to 19 in. each side -- Fits frames up to 3 in. W x 4 1/4 in. H -- 1 1/2 in. square, 16-gauge pre-galvanized steel uprights -- 39 in. high -- 2 3/8 in. diameter white PVC posts -- Stands 60 in. above the trailer frame * Model 27670: Loading your pontoon boat onto your trailer is much easier with post guide-ons. These guide-ons mount on top of rear crossmember and fit in-between the pontoons to center your boat on the trailer. -- Mounting hardware included -- 1 1/2 in. square 16-gauge pre-galvanized steel uprights -- 2 3/8 in. diameter white PVC posts -- Fit up to 3 in. W x 4 1/4 in. H frames -- 22 in. high
Not Yet Reviewed
$93.99
—
$184.99
$54.50
—
$105.50
Clearance
The C.E. Smith pontoon bunk board guide-on kit is an essential boating accessory for boat trailers. This guide-on is designed to make loading and unloading your pontoon boat onto your trailer a breeze. Galvanized steel construction ensures it can withstand harsh marine elements and provide long-lasting use, while the zinc-plated hardware adds an extra layer of rust protection. It features U-bolt mounting brackets that provide a secure fit for frames up to 3 in. wide x 4 1/4 in. tall for easy installation. The included two rubber roller bunks provide minimum friction rolling action, which allows you to easily guide your pontoon boat onto the trailer. The bunks also reduce wear and tear, which helps prolong your boat's life. The guide-on is the optimal height for bunk-style pontoon boat trailers with box, channel or L-beam frames. The guide-on is designed to be mounted with roller bunks 2-3 in. from the pontoons on a trailer from the crossmember.
Not Yet Reviewed
$114.99
$64.50
Black natural rubber bow Y-stops are original equipment on many trailers. C.E. Smith offers replacement Y-stops in multiple sizes. Choose from a 4 in. span with 2 in. x 2 in. mount and 3/8 in. bolt; or a 6 5/8 in. span with 3 in. x 3 in. mount and 1/2 in. bolt. These rubber "bumpers" cradle the front of your boat for a secure hold.
Not Yet Reviewed
$8.99
—
$17.99
Clearance
Guide-Ons are a great way to add and improve visibility when loading and unloading your boat. These guide-on post extensions pair nicely with C.E. Smith bunk board guide-ons, coupling the centering support and the added visuals to make trailering easy. Product details: * 4 adjustable height settings 39.5 in., 37.5 in., 35.5 in., and 33.5 in. (as measured from the top mounting bolt hole center to the top of the PVC cap) * 1 1/4 om/ pre-galvanized steel tubing * 1 14/16 in. O.D. white PVC tube * Works with C.E. Smith 2 ft. bunk board guide-ons and the C.E. Smith 5 ft. bunk board guide-ons * Can be used with other bunk board guides with 1 1/2 in. tubing * Includes all needed hardware to mount with existing C.E. Smith bunk board guide-ons * Sold in pairs * Bunk board guide-ons sold separately * Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).
Not Yet Reviewed
$88.99
$44.50
Black natural rubber rollers are original equipment on many trailers, helping to steady and secure watercraft for transport. C.E. Smith offers replacement trailer rollers in a variety of styles (bow, keel, roller spool), lengths, and mounting hole sizes. The rollers fit standard brackets and shaft sizes.
Not Yet Reviewed
$65.99
Why are wheel bearing protectors needed? : Boat trailer hubs get warm while traveling to the ramp. Warm hubs backed into cool water during launching are suddenly cooled, which contracts any air inside the hub—creating a vacuum. The vacuum pulls water and road grit inside the hub, contaminating the grease. This contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season. C.E. Smith wheel bearing protectors correct this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the bearing protector pressure relief feature. Once the hub is full, the spring-loaded piston in the bearing protector exerts a slight pressure to the grease inside the hub. With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside. Additional details: * An automatic pressure relief feature prevents over-filling the hub which would damage seals * Chrome plated steel or stainless steel protectors with bra * Available for a variety of hub bore diameters * Sold in pairs
Not Yet Reviewed
$33.99
C.E. Smith offer trailer bunk board brackets in a variety of sizes; some models are adjustable. The hot-dip galvanized steel swivel brackets will stand up to the harshest marine environments. Order the length and other options best suited for your trailer and watercraft application.
Not Yet Reviewed
$3.99
—
$13.99
C.E. Smith pontoon wing brackets support bunk boards in a shallow V-cradle configuration that best suits pontoon hulls. These V-wing bolsters are designed with a 7 in. lateral adjustment slot for perfect pontoon-to-trailer alignment. Additional details: * 1/8 in. thick steel * Hot dip galvanized for durability * Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat * A bracket should be installed at each frame crossmember for maximum support and load capacity
Not Yet Reviewed
$16.99
C.E. Smith offers fishing rod mounts and holders for your watercraft in multiple styles. They're made from stainless steel with a protective silver finish. Here are details on two styles: * Flush mount (part number 53672A): They feature a wide low-profile cap for excellent mounting strength and to enhance the appearance of any boat. The 100 percent welded cap-to-tube joint will never break. The super tough 1/4 in. wide x 1/2 in. tall welded cast gimbal bar will stand up to virtually any punishment heavy tackle or downrigger mounts can dish out. A white vinyl liner protects rods and is keyed with the gimbal bar to eliminate liner twist. -- Made from 316L stainless steel -- 1 5/8 in. inner diameter -- 2 in. outer diameter -- 9 in. tube -- Cap: 4 1/2 in. long x 3 5/8 in. wide * Vertical mount (part number 55108A): Clamp is made for the square rails found on pontoon boats. Each rod holder comes with two protective liners, one to fit 1 in. and one to fit 1 1/4 in. square rail. The liners are round on the outside, allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. -- Made from 304 stainless steel tube lined with UV-resistant black PVC and fitted with a chrome zinc alloy adjustable clamp -- Angle around the rail is infinitely adjustable -- Angle to the left or right adjusts in 15 degree increments -- Plastic insulator sleeves are included to help provide snug fit on the rail -- 9 in. tall tube with 1 5/8 in. I.D. -- Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place -- Gimbal pin keeps your rod from spinning -- Solid bottom with drain holes prevents water from pooling -- A great option for freshwater use!
Not Yet Reviewed
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
