Availability
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Bowler Performance lock-up control modules come complete with everything needed to seamlessly control your torque converter lock-up. Converter lock-up will occur 8 to10 seconds after 4th gear engagement, allowing enough engine rpm gain before lock-up, giving your engine more performance and providing a better feel to lock-up. Bowler's lock-up modules only require one 2 amp fused 12 V wire to operate. No vacuum switch is necessary allowing these modules to function correctly with all types of engines, and there are no bulky boxes to hide or mount. The control modules have the GM 4-prong connector integrated onto the control board, and are epoxy coated to stay protected against the elements. Choose the kit designed for your transmission. Kits include: * Lock-up control module * Internal wiring harness with lock-up solenoid and mounting studs * Pressure switch * Pan gasket * New transmission filter * Case pass through connector * Brake light switch—standard that has a normally closed switch (for your lock-up module) and a normally open switch (for your brake lights). The brake switch does not have to be installed for the lock-up module to function, but will allow the driver to tap the brake to un-lock the converter at any time. If you are going up an incline and need a few more rpms to get up that hill, just tap the brake, and the lock-up will turn off and not re-engage for approximately 8 seconds. For those with a high-gear ratio and late down shifts who experience a chug of the motor due to the lock-up converter still being engaged; the switch will eliminate this concern.
( 10 )
$229.99
Are you tired of the trial and error method of adjusting your TV cable on your 700-R4 and 200-4R transmission? Bowler Performance Tru-Shift throttle correction systems will solve your problems. These are the easiest and best functioning TV cable adjusting systems available, and they are easy to install. Simply bolt on the supplied bracket and carburetor cam assembly, install the Bowler TV cable, then run the accelerator to wide open throttle. The cable will automatically adjust itself and you're done. With Bowler Performance Tru-Shift systems there is no need to remove the carburetor, adjust cams, drop the transmission pan, or install a pressure gauge to check the pressures, but best of all—there isn't any more guessing. Bowler even includes different throttle cable brackets to cover Lokar, Gennie, GM square, and early round hole styles. Each one attaches neatly to the supplied bracket. Choose the kit designed for your carburetor.
( 4 )
$312.99
Bowler Performance Tilton hydraulic master cylinder kits include the components to produce proper pressure and smooth shifting. Each kit contains a Tilton master cylinder, fittings, braided stainless steel line, billet aluminum or plastic remote reservoir, and hardware to attach to OE/factory clutch pedal or Bowler aftermarket pedal. Choose the clutch master cylinder kit designed for your vehicle.
( 1 )
$655.99
Bowler Performance bellhousing dial indicator plates correctly dial indicate and align your bellhousing. These steel plates for the Tremec T-56 6-speed transmissions will also work for both GM and Ford versions. They will eliminate the need to remove the front cover of the transmission for bellhousing alignment.
( 1 )
$99.99
Building transmissions since 1963, Bowler believes in detail, and each of their Tru-Street automatic transmissions are fully remanufactured (not "rebuilt") by one qualified technician, dyno tested, and then custom packaged for safe shipping. The Tru-Street Series includes torque converter and may include other components, as well. Choose the one you prefer.
Not Yet Reviewed
$4,259.99
—
$8,847.99
Clearance
Bowler Performance hydraulic clutch master cylinders create the proper pressure for smooth shifting, and they are offered in many different styles. They are available with a plastic or anodized billet aluminum reservoir, plus other components (braided line, fittings, bracket, etc.) depending on kit. Choose the clutch master cylinder designed for your vehicle.
Not Yet Reviewed
$655.99
$452.50
—
$669.99
Bowler Performance GM LS T-56 Magnum 6-speed transmission packages are designed, tested, and built for the aftermarket. The Magnum offers a "no compromise solution" for your hot rod project, and is rated to handle tire blistering torque. Weighing in at 135 lbs., the T-56 features a single rail shifter design, 3-piece synchronizer assemblies, and three shift lever locations. Choose the Magnum model with the gear ratios you prefer. Packages feature: * T-56 Magnum 6-speed transmission * LS aluminum bellhousing * OE LS throwout bearing/hydraulic slave with -4AN inlet and remote bleeder * Flywheel, clutch, bolts * Billet 31-Spline 1350 Series slip yoke * Dial indicator plate for concentric bellhousing alignment * All-in-One harness with reverse lock-out control module * Energy Suspension mount * 4 qts. of Royal Purple Synchromax fluid * 12-month warranty
Not Yet Reviewed
$6,742.99
Bowler Performance Carbon Edition manual transmissions offered are the Tremec T-56 Magnum 6-speed and the TKX 5-speed. These hand-built blueprinted assemblies allow for higher rpm shift points under heavy-torque loads, and are the perfect solution for any serious track car or enthusiast looking for the best possible shift feel and performance. Magnum T-56 6-speed is rated to handle a tire blistering 700 lb.-ft. of torque, and features a single rail shifter design, 3-piece synchronizer assemblies, three shift lever locations, multiple gearing options, and weighs in at 135 lbs. TKX 5-speed has 600 lb.-ft. of torque capacity and is capable of engine speeds of 8,000 rpms with shifts at 7,500 rpms. It is available in multiple gear ratio configurations. Converting your hot rod to a 5-speed or 6-speed is a fantastic way to add overdrive and give yourself the ability to drop the engine rpms and increase your mpgs, which makes owning and driving your prized car much more enjoyable. Choose the desired Bowler Carbon Edition transmission for your vehicle. Benefits of the Bowler Performance Carbon Editions: * Reduced operating temperatures * Reduced torque loss/improved rotating efficiency * Increased gear and bearing life * Reduced vibration and noise * Reduced lubrication requirements * Improved shift feel * Eliminated break-in run-in requirements * Dyno tested The 5- and 6-speed features: * REM ISF finished gear set * REM ISF finished shift rails * Updated aerospace polymer fork pads * Updated carbon block rings * Gray coated finish helps dissipate heat The 6-speed also offers: * Updated second gear * Upgraded 1-2 synchronizer hub * Nightstick billet shifter * Upgraded carbon fiber lined blocker rings in all gears, even reverse
Not Yet Reviewed
$5,649.99
—
$11,000.99
Bowler Performance GM LS TKX 5-speed transmission packages are designed, tested, and built for the aftermarket. The TKX offers 600 lb.-ft. of torque capacity and is capable of engine speeds of 8,000 rpms with shifts at 7,500 rpms. It is designed for multiple applications with three shifter locations, and a compact, end-loaded design that provides clearance in most transmission tunnels without floor modifications. Choose the TKX model with the gear ratios you prefer. Packages include: * GM TKX 5-speed transmission * Cast aluminum bellhousing and required hardware * Tilton 6000 Series throwout bearing with -4AN inlet and remote bleeder * RAM single disc clutch kit with spring hub discs, billet steel flywheel, and all required hardware good for up to 550 hp * Reverse light and electronic speedometer pigtail connectors * Energy Suspension transmission mount * 3 qts. of Royal Purple Synchromax fluid * Roller pilot bearing * 12-month warranty
Not Yet Reviewed
$5,689.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
