Availability
Stabilize your ride with BMR control arms. They are CNC-machined and made, depending on the application, from heavy-duty DOM steel tubing, chromoly steel, or 6061-T6 aluminum. BMR polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. Their greasable bushings are internally fluted to allow grease to coat the inner sleeve, while keeping the thrust surface lubricated—ensuring quiet, reliable operation over the life of the bushings. BMR's heavy-duty spherical bearings are designed to eliminate deflection and wheel alignment changes. Their spherical bearings can withstand the extreme stresses of the performance environment, offering all of the bind-free suspension articulation needed for great handling. These design features result in incredibly strong control arms that greatly improve performance and work well in street performance, drag race, and handling applications. Many are adjustable, allowing you to dial-in pinion angles for correct driveline geometry, or correct, add, or reduce negative camber and other alignment settings. BMR control arms are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
( 199 )
$109.95
—
$329.95
BMR rear cradle bushing kits are designed to help minimize wheel hop and reduce rear cradle movement in your vehicle. They're manufactured from low-deflection polyurethane or Delrin for maximum strength and durability. Install a set of these, and the results are better handling and more consistent launches without significantly increasing noise, vibration, or harmonics. Select the kit designed for fitment with your make and model.
( 9 )
$239.95
—
$509.95
BMR Suspension motor mount kits will curb engine shift--wasting less horsepower, reducing vibration, and improving throttle response. These bolt-in units come complete with brackets and hardware and are available in red or black hammertone powdercoat finishes. BMR kits afford you greater performance over the stock oil-filled hydraulic bushings designed for comfort.
( 27 )
$139.95
—
$149.95
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$259.95
—
$299.95
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
( 486 )
$139.95
—
$299.95
Stop the hop with BMR trailing arms. BMR Suspension offers a selection of trailing arms to fit your application with stable handling, minimized wheelhop, and consistent, better overall performance. You can choose non-adjustable heavy-duty rectangular steel arms fitted with polyurethane bushings or low-friction, Teflon-lined spherical bearings or their strong adjustable DOM tubing fitted with premium rod ends with stainless spacers/reducers. Stamped steel and rubber bushings make for poor performance. Choose better made BMR trailing arms for your performance setup.
( 38 )
$169.95
—
$329.95
Minimize wheel hop and enhance rear stability with BMR Suspension differential bushings. They are far superior to factory bushings and drastically decrease differential movement and pinion rise. BMR bushings replace the entire OE bushing and are manufactured to strict tolerances for a perfect fit and increased performance. They will survive exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment. Several kits include heavy-duty hardware; while not necessary for all customers, BMR supplies the upgraded hardware for those who have higher power levels or plan on launching hard on the street or at the dragstrip. This hardware upgrade may require slight modification to the rear differential mounts. BMR Suspension differential bushings are available in: * Polyurethane--a synthetic polymer that deflects far less than rubber without excessive increases in noise, vibration, or harshness. * Delrin--a solid synthetic polymer that eliminates deflection and drastically increases differential stability. They are machined from solid Delrin and are intended for extreme performance street, drag race, and handling applications. * Billet aluminum--doesn't deflect and can also withstand much higher temperatures than rubber, polyurethane, or Delrin; making it a great choice for race cars where the differential creates large amounts of heat for extended periods of time.
( 17 )
$189.95
—
$259.95
The amount of force exerted on sway bar end links is staggering--especially if you've upgraded to an aftermarket sway bar. Stock end links are weak and can bend or break. BMR's end links allow you to push your car to the limit without fear of end link deflection. BMR end links are manufactured, depending on the application, out of CNC-machined 6061-T6 billet aluminum, heavy-duty steel bar stock, with custom spacers and Grade 8 hardware. Where appropriate, they feature ball joint-style tie rods that offer huge advantages over end links that use rod ends. Ball joints allow for more articulation than rod ends; this ensures long life, flawless operation, and less noise (many are greasable). High-durometer polyurethane bushings are used wherever required. This combination of components provides a huge increase in strength over stock end links. BMR sway bar end link kits feature durable finishes and are designed for street performance, autocross, and road race applications. Their reduced deflection uses more of the potential of the sway bar. Where applicable, adjustable links allow for on-car adjustability, allow for easy correction of sway bar geometry and working angles on lowered cars, with the ability to preload the sway bar to fine-tune the suspension setup for any track. Combine this with BMR's adjustable sway bars, and you can dial-in your car for the street or any track. When performance is a must, rely on BMR Suspension!
( 27 )
$149.95
—
$319.95
BMR control arm bushing kits are manufactured from 95-durometer polyurethane. They are designed to minimize suspension deflection and reduce wheel-hop and inconsistent launch characteristics. So, if you're planning a control arm upgrade, equip your vehicle with BMR control arm bushings and get the most out of your vehicle's suspension performance.
( 18 )
$49.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
