Availability
Blair spot weld cutter kits are the professional's choice for removing spot welds. By cutting around a spot weld and leaving the underlying panel undamaged, the damaged panel can be quickly removed. Then, just repair the panel and replace it, or install a new one using the spot weld cutters to make plug holes for welding. Some cutters feature an adjustable depth rod that protects the underlying panel. The bits are used in standard hand-held drills.
( 120 )
$16.99
—
$66.99
For precision hole-making in sheet metal and frame materials up to 1/2 in. thick, choose Blair Rotabraoch cutter kits. These annular cutters are ideal for sheet metal fabrication or PDR and rust proofing access holes because the snap-in plugs fit perfectly. Blair Rotabroach cutter kits are designed to make clean, burr-free round holes with no deforming of stock or damage to the surrounding material. For your serious fabrication projects, use Blair Equipment.
( 13 )
$98.99
—
$265.99
Blair Rotabroach cutters are for precision hole-making in plastics, mild steel, stainless steel, or aluminum up to 1/2 in. thick. They cut clean, burr-free, round holes fast—unlike twist drills that push or hole saws that tear through materials. They're hollow and cut around the edge of the hole without deforming your material or creating jagged edges. Multiple cutting teeth are precision-ground for long tool life. Wherever fast and superior-quality holes are required, a set of Rotabroach cutters is the answer. Patented tooth geometry prevents chip clogging; arbors fit 3/8 in. and 1/2 in. drill chucks and use either spring-loaded or skip-proof pilots to eliminate pre-drilling.
( 2 )
$25.99
—
$48.99
With Blair Equipment Holcutter sets, 1/8 in. sheet metal, rubber, many plastics, and gasket and fiber materials don't stand a chance. Unlike traditional hole saws that rip and tear their way through a job, these precision-ground, heat-treated tools produce a hole three times faster and cleaner with professional results and minimal effort every time. This set includes 7/8, 1 1/8, 1 3/8, 1 3/4, 2, and 2 1/2 in. Holcutters, plus a threaded easy-on, easy-off arbor that fits all 3/8 in. drills and makes changing Holcutter sizes a snap.
( 3 )
$216.99
Blair Equipment Holcutters are not hole saws. They're precision ground, heat-treated tools made from M2 HSS that easily cut thru the stock—rather than ripping, tearing, and pushing thru as do typical hole saws. Holcutters can produce holes 3x faster and cleaner than hole saws in sheet metal—and have a dramatically extend tool life. The Holcutters are for producing holes from 11/16 in. up to 3 in. diameter in sheet metal, rubber, gasket, or fiber materials—and some plastics up to 1/8 in. thick. Ideal for aftermarket installations, custom fabrication, gauge installation, and modification of trailers. Order the hole-size "bit" needed for your application.
( 1 )
$16.99
—
$29.99
Blair Holecutter arbors feature a hex washer and pilot drill—and are compatible with 3/8 in. or larger chucks. Each arbor utilizes hardened steel construction and has been tested to ensure extreme jobsite durability. Blair Equipment offers a full range of mandrels for versatility in a wide range of hole saw applications.
Not Yet Reviewed
$8.50
—
$22.50
Blair Equipment arbors for Rotabroach cutters fit 3/8 in. and 1/2 in. hand-held drill chucks, and use either spring-loaded pilots or skip-proof pilots—which eliminate pre-drilling operations. The arbors are made from quality materials and are available in different configurations to fit your Rotabroach annular tool.
Not Yet Reviewed
$7.99
—
$41.99
Control and power! Blair Enforcer spot weld drill tools are the fastest and easiest way to drill a spot weld. That's because you don't have to center punch every weld like you do with other types of cutters. And you don't have to worry about starting a cut and having the bit walk off. The tools remove spot welds on all types of materials, particularly UHSS and Boron. No air power is consumed to advance the cutter, resulting in faster spot weld removal. Low-noise and lower cutting rpm, they will only drill as deep as you set them up. Choose the Enforcer when speed, control, and accuracy matter! Blair Enforcer spot weld drill tool kit also feature: * Two 360 degree swivel-frame clamps (2 5/16 and 5 5/8 in.) * Built-in comfort grip * One triple-fluted solid carbide drill bit * Carrying case * Additional sizes of solid carbide spot weld cutters are available (sold separately)
( 2 )
$564.99
Blair Rotabroach stick lubricant is specially formulated for use with Blair tools. It is designed to increase tool life and cutting speed. The lubricant is applied directly to the tool before cutting. Its waxy-type viscosity melts and provides lubrication to the cutting teeth. It is environmentally friendly.
Not Yet Reviewed
$12.99
Blair sheet metal panel flangers make repairs in half the time with absolutely no stretching or distortion of material. Blair panel flangers make a perfect joint even through underbody deadener in sculptured contours and high crowns, and there's no need to remove parts of the vehicle-all work is performed from one side. The lightweight 7 in. cam-action flanger is fully adjustable, self-locking, and springs open for quick release and positioning for the next compression.
( 10 )
$61.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
