Availability
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
—
$87.99
Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.
( 2 )
$80.83
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$97.89
Artec Industries battery boxes are guaranteed to outperform the competition! Their sleek, no-nonsense design gives you the peace of mind knowing your battery is secure in the most demanding environments. They're precision CNC-cut from 10-gauge cold-rolled steel plate and include high-quality mounting hardware for installation. Your battery will fit snugly, eliminating movement that causes premature wear and shorter life. It's power source security on the trail!
( 33 )
$98.99
Artec Industries offers Ultimate 60 high steering arm fasteners for a variety of Dana 60 axle applications. These knuckle bolt kits work well with Artec's Ultimate 60 high steer arms to increase overall knuckle and steering strength—as well as provide options for mounting your steering. Whether you just need to reinforce your knuckles, or want to run your tie rods in double shear, these kits are designed to fit multiple steering configurations. Two kits are required for a pair of high steer arms, and cutting the sleeves in half is necessary to run Heim joints in double shear. Tie rod end holes on the knuckle need to be drilled to 3/4 in. diameter. Order the model that's best suited for your application. Features include: * 3/4 in.-16, 10 in. long, Grade 8 bolt * 3/4 in.-16 all-steel mechanical locknut, the best type of locking nut for steering applications * Machined 1.25 in. O.D., 0.250 in. wall DOM sleeve * Sleeve ends machined for 3/4 in. Heim joints in double shear * Choose your tie rod mounting height * Available for OEM Ford, OEM Chevy, OEM Dodge, and all aftermarket knuckles Important safety notes: * Requires basic steel cutting tools for installation; use caution when cutting steel * Only experienced fabricators should attempt these modifications * All-steel mechanical locking nuts are designed NOT to be reused to ensure the nut does not loosen over time; always use a new nut if you remove it
Not Yet Reviewed
$58.29
Artec Industries adjustable link tower brackets are designed for use with large joints that have a 2.625 in. mounting width. The holes are set at 7, 8, and 9 in. from the axle centerline to allow you to fine-tune your suspension. They're manufactured from 1/4 in. thick steel and come in four unwelded pieces that jig together for easy assembly. These Artec brackets are especially useful if your tire size changes and the suspension needs to be adjusted. Rather than cutting off the old brackets and installing a taller one, you can simply move your link to the next higher mounting hole!
Not Yet Reviewed
$89.99
Artec Industries JMX Series rod ends are an ideal way to add strength, reliability, and flexibility to any situation requiring use of a rod end, such as suspension or steering applications. The JMX Series rod ends utilize a high-strength, heat-treated 4130 chromoly body with silver zinc finish and a PTFE liner for smooth operation. Artec Industries premium 3-piece JMX rod ends remain quiet and tight for years of usability. More features: * Ball is made from heat-treated bearing steel for strength and hard-chrome polished for a smooth surface * Race is a heat-treated alloy steel helping the joint outlast normal budget rod ends with an injection molded race
Not Yet Reviewed
$72.59
No more oil or fluid bottles bouncing around the back of your car, truck, SUV, boat or 4x4! Artec Industries quart crate holders neatly and securely organize your extra automotive fluids. These units fit nicely inside your trunk, behind a bench seat, or in other out-of-the-way places. The weight-saving design doesn't bog down your vehicle and even makes it simple to carry by hand. CNC precision laser-cut and bent to provide a snug fit, the holders feature a clip-in style hinge on one side and a strong locking clamp on the other. They'll store all standard-sized quart containers. The crate holders can be hard-mounted to your vehicle using simple tools, and the bare steel can be painted or powdercoated to prevent corrosion.
Not Yet Reviewed
$76.99
Artec Industries rod end kits are a great way to add strength, reliability, and flexibility to any situation requiring rod ends—like suspension or steering applications. They utilize high-strength chromoly bodies with a polished chrome finish that's sure to impress. The ball is made from heat-treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection-molded nylon which keeps the joint quiet and tight for years of usability. Artec Industries rod end kits are available on right or left hand threads and great for the builder on a budget. Kits include: * 3/4 in.-16 tpi chromoly rod end with 3/4 in. bore * Jam nut * Tube adapter for 1.0 to 1.5 in. O.D. tubing * 2 stainless steel high-misalignment spacers
( 1 )
$93.49
Artec Industries JK lower control arm skid plates are heavy-duty skids designed to take serious abuse and reinforce your front 30 or 44 JK axle lower control arm brackets. They're constructed using 1/4 in. mild steel, are precision CNC-cut and bent for superior fitment, and are set up to outperform the competition. Their wraparound design provides protection for OEM as well as aftermarket joints to avoid costly repairs. Artec Industries JK lower control arm skid plates are the perfect way to provide valuable reinforcement to areas that are prone to abuse.
Not Yet Reviewed
$54.99
Artec Industries offers skid plates for high-clearance Comp front bumpers on a variety of late model Jeep applications. They're fabricated from 3/16 in. aerospace-grade raw aluminum. The bolt-on bash skids are precision-machined for countersunk hardware, offering a sleek, durable finish.
Not Yet Reviewed
$74.99
Artec Industries 1-ton APEX front differential top caps are included in swap kits with the Daystar bushings or RockJock Johnny Joints UCA brackets, but not with the single adjustable truss upper link mount kits. Artec conveniently offers the APEX front differential top caps individually. These heavy-duty caps are CNC-cut and bent from thick mild steel and will weld directly to the differential casting, allowing the mounting of driver side upper control arm brackets. Choose the one designed to match your vehicle's application.
Not Yet Reviewed
$76.99
Artec Industries adjustable panhard mounts allow for different levels of drop to fine-tune your suspension. These steel mounts are for use with any 3 or 4-link suspensions and may require trimming to fit. Most will need to be welded securely into place. For a well-aligned suspension, use Artec Industries adjustable panhard mounts.
( 4 )
$69.99
Unleash the full potential of your off-road adventure with Artec Industries high-clearance rear bumper winch fairlead brackets. Designed for durability and performance, the mounts will comfortably secure up to a 12K winch, ensuring you're equipped for any challenge. They're engineered for easy installation and a perfect fit on your vehicle.
Not Yet Reviewed
$99.99
Artec Industries offer JK rear frame UCA 3-link chassis brackets that will allow for mounting a single upper control arm above the driveshaft in a Jeep JKU. These brackets are for use with RockKrawler Krawler joints that have a 2.325 in. mounting width and a hole size of 9/16 in. They are machined from 3/16 in. thick steel and are CNC-bent for precision. These brackets do require welding, and if so desired, may be painted. Each rear frame bracket welds between the two factory crossmembers above the driveshaft and is intended for use with a RockKrawler X-Factor rear 3-link upper control arm.
Not Yet Reviewed
$87.99
Artec Industries ABS reluctor rings provide your on-board computer with correct data from the anti-lock braking system, eliminating codes and limp mode issues. These tone rings are made from quality steel and available in a range of tooth sizes to fit a variety of models. They're built specially for the axle swap applications on your Jeep JK.
Not Yet Reviewed
$50.59
Artec Industries is excited to announce their new spare tire delete kits. The tailgate cover plates are manufactured from 1/16 in. thick aluminum and designed using state-of-the-art 3-D modeling. Artec utilizes original OEM files, then CNC laser-cuts and bends each piece in-house for a precise fit. They're hard-powdercoated black for good looks and durability. New hardware is included to mount the factory back-up camera and third brake light assembly. Original spare tire carrier hardware is re-used to mount the plate to the vehicle. Order the spare tire delete kit recommended for your specific vehicle.
Not Yet Reviewed
$87.99
Artec Industries JL LED light bar mounts are constructed from 1/8 in. thick steel and designed using state-of-the-art 3-D modeling with files directly from the manufacturer. These hood mounts are for a single straight LED light bar. Additional product features: * Designed to fit Rigid Industries E and SR Series light bars, and most straight light bars with studded ends * CNC laser-cut and CNC-bent in-house for precise fit * Powdercoated for durability * Includes new hardware and spacers * Direct bolt-in installation
Not Yet Reviewed
$74.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
