Availability
On Sale
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$87.99
$65.99
On Sale
Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.
( 2 )
$87.99
$65.99
On Sale
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$97.89
$73.42
On Sale
It doesn't make sense for coil springs with an uneven bottom to sit on a flat plate. These Artec Industries coil spring correction plates weld to your bottom flat plate and provide a seat that follows the curvature of the coil spring. Artec plates will help eliminate spring bowing that is commonly found under coil suspensions using flat coil perches. The correction plates are made from 1/2 in. thick steel and precision CNC-machined with a 1/2 in. course thread hole to allow easy installation with coil retainer plates.
Not Yet Reviewed
$159.99
—
$175.99
$119.99
—
$131.99
On Sale
Artec Industries rear TJ coil spring perches and retainers are designed for use with the Artec TJ axle truss or modular truss axle swap applications. They precisely locate the coil springs in the factory location, and are clockable to any angle for larger suspension lifts. The coil spring perches and retainers are CNC laser-cut and bent from 1/4 in. thick steel, and include the tubing spacers and mounting hardware. Order the model recommended for your Jeep application.
( 5 )
$102.99
—
$214.49
$77.24
—
$160.87
On Sale
Make your axles more robust; swap a 1-ton front or rear axle into your Jeep with Artec Industries axle swap kits. They provide a heavy-duty truss and bracket system designed to take serious abuse and reinforce your entire axles. The components are precision CNC-cut and bent, all the necessary brackets are included, and the overall low-profile design means your axles are stronger, sleeker, easier to install, and less likely to interfere with vehicle components.
Not Yet Reviewed
$604.99
—
$637.99
$453.74
—
$478.49
On Sale
Artec Industries Ford Super Duty high steer arms are designed for use with the aftermarket Reid Racing Super Duty knuckles. They enable you to correct OEM steering geometry, allowing the drag link to mount above or beneath the arm, depending on lift height steering problems. These arms are CNC-machined from 1 in. thick cold roll steel and clear zinc plated for corrosion resistance. Order the model recommended for your application.
Not Yet Reviewed
$296.99
$222.74
On Sale
Do you have rusty, busted, or abused factory front coil buckets on your TJ or LJ? Or are you looking to change to a coil suspension on your YJ or other leaf sprung vehicle? Or do you want to customize your suspension? These heavy-duty TJ front frame side coil buckets from Artec Industries are a great replacement for your OEM coil buckets. They will also allow you build your suspension the way you want, not limiting you to how the factory intended. This DIY kit includes the laser-cut and precision CNC-bent pieces that will need to be welded together as well as onto the frame. The kit has been specifically designed to complement the factory frame, yet look distinctly hardcore. It's also engineered for maximum strength and easy assembly—with jigs and laser-etched part numbers so you can't put it together wrong. Product features: * CNC laser-cut and CNC-bent from heavy-duty 3/16 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Retains factory bump stop threading, so they're a direct replacement * Gusseted between the coil bucket and shock mount for extra strength * Includes a 2.0 in. O.D. piece of DOM tubing * Provides factory-style shock stem attachment, or choose to add shocks tabs for a clevis bushing-style shock attachment * Direct replacement for TJs and LJs—and can work as an upgrade for leaf sprung vehicles looking to change to coil spring suspension *NOTE: If not installing on a TJ or LJ, consideration must be made for the OEM frame width in comparison to axle width. Most leaf sprung frames do not turn inwards in this area like a TJ does, so the frame is wider. **NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation. Welding, grinding and fitment may be required when installing this kit. Every frame varies slightly and some fabrication may be required.
Not Yet Reviewed
$318.41
—
$351.99
$238.81
—
$263.99
On Sale
Artec Industries JL/JT to TJ APEX front swap bracket kits upgrade your Jeep with heavy-duty coil buckets and a robust truss. Engineered to precisely fit JL/JT axles, each kit boasts 3-D-accurate fitment, American-made steel for unrivaled strength, and a seamless weld-on installation that maintains proper clearance. Take on challenging trails with confidence, knowing your rig is fully equipped for the journey with Artec coil bucket brackets. Features and benefits: * Crafted from premium-grade steel, these coil buckets deliver exceptional strength and durability for unmatched performance, even under the harshest off-road conditions * A precision fit engineered to weld seamlessly onto Jeep JL or JT front axles, ensuring precise suspension alignment and a secure, long-lasting fit * Developed using advanced 3-D data from Dana Corp/SPICER and OEM vehicle specifications, guaranteeing the perfect fit and optimal clearance for your suspension setup
Not Yet Reviewed
$199.00
$149.25
On Sale
Artec Industries JL/JT to TJ APEX M210 front swap kits upgrade your Jeep with heavy-duty coil buckets. Engineered to precisely fit JL/JT M210 axles, each kit boasts 3-D fitment, ensuring every angle aligns perfectly for optimal ride quality, top-tier performance and reliability. Whether you're navigating rocky trails or cruising highways, these coil buckets deliver the stability and performance upgrade your build demands. Ditch the guesswork and outfit your TJ with a tailored, professional-grade solution from Artec Industries. Features and benefits: * Crafted from premium steel for robust strength and lasting durability, ensuring reliable performance even in the most challenging off-road environments * Designed to weld seamlessly onto Jeep JL or JT front M210 axles, delivering an exact fit that guarantees proper suspension alignment and stability * Developed using advanced 3-D data from Dana Corp/SPICER and OEM vehicle specifications, ensuring precise fitment and optimal clearance for your build
Not Yet Reviewed
$299.00
$224.25
On Sale
Artec Industries TJ/YJ back half frame kits allow many Jeep owners to eliminate the clunky back half of their stock frame and allow clearance for coilovers and/or larger heavy-duty axles. By narrowing the frame, you're able to run coilovers without notching and weakening your factory frame. Plus, since the shocks don't hang as low as the factory frame in the back, you can do a stretch with that one-ton axle and have better up-travel. Artec Industries TJ/YJ back half frame kits feature: * CNC laser-cut and bent from 1/4 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Interlocking jig and key holes for quick, one-way-only assembly * Maximum welding surface area with weld holes and fish mouth ends * Stylish curved design complements factory-style and increases strength at transitions * Wide enough to fit Artec fuel cell mounts for JAZ and RCI fuel cells
( 4 )
$406.99
$305.24
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
