Availability
Allstar Performance power steering pumps with pulleys are durable and dependable. They provide smooth consistent steering. The pumps are rated at 3 gallons per minute and produce up to 1,300 psi at a recommended pump rpm range of 1,500 to 6,500.These pumps provide smooth and consistent steering.
( 10 )
$219.99
—
$249.99
Allstar Performance power steering hose kits are designed to aid in the installation of a remote-type steering pump that is applicable to the majority of cars. The high-pressure lines are available in rubber or braided stainless steel, in different lengths and fitting sizes.Kits include all necessary components for the installation.
Not Yet Reviewed
$149.99
—
$199.99
Allstar Performance steering wheel disconnects enable you to remove or replace your steering wheel quickly. These anodized aluminum shafts weld-on and are available in multiple styles to suit your application.
( 22 )
$104.99
Allstar Performance high-pressure power steering hoses are available in a variety of lengths and diameters for building custom power steering lines or making repairs. Choose from braided nylon or braided stainless steel material. Both styles are suitable for most steering applications.
( 4 )
$139.99
Allstar Performance steering shafts are collapsible units designed to be used in-line near the rack and pinion or steering box, allowing steering shaft compression. The shafts are manufactured from heavy wall tubular steel shaft with splines on both ends. They include durable rubber boots to keep the sliding mechanisms free of dirt and debris.
Not Yet Reviewed
$138.99
—
$149.99
Titanium fasteners are prized for their strength, lighter weight, and corrosion resistance. Allstar Performance offers many kits with bolts, studs, screws, and more to secure your project. Allstar Performance steering arm stud kits include four titanium studs with black nylon locking half nuts that thread into the steering and pitman arms with 1/2 in.-20 threads for properly mounting steering links.
Not Yet Reviewed
$112.99
Allstar Performance knee guards are designed for protecting knees and providing comfortable leg support when throttling through corners. These aluminum knee guards feature high-impact, fire-retardant padding covered with self-extinguishing cloth for added safety. They fasten to the half box mount (not the box) by drilling and bolting or riveting—and are held in place with safety wire or a wire tie.
Not Yet Reviewed
$132.99
Simplify the plumbing of KSE Gen2 steering gear and wing cylinder with Allstar Performance Sprint car hydraulic wing cylinder line kits. They feature strong, lightweight, heat-resistant, braided stainless steel lines. Allstar Sprint car wing line kits contain: * Two #4 slider lines -- 22 in. and 36 in. lengths * One #4 pressure line -- 18 in. length * One #4 return line -- 18 in. length * Four 45-degree 4AN to 1/8 in. NPT aluminum valve fittings * Two 90-degree aluminum 4AN to 1/8 in. NPT cylinder fittings * Two high-flow -3 ORB to 4AN fittings
Not Yet Reviewed
$124.99
Allstar Performance 1:1 ratio pulley kits are lightweight, double-groove aluminum pulleys. They include crank and water pump pulleys and belts for use with Allstar block or head-mount power steering pumps. Order the model recommended for your engine application.
( 14 )
$114.99
Allstar Performance adjustable center links are offered in different applications to fine-tune your suspension and steering for better overall performance. Don't lose control! Let Allstar Performance steer you in the right direction!
( 4 )
$214.99
—
$229.99
Specifically designed for short or Corvette water pumps, Allstar Performance aluminum reduction pulleys work with your power steering pulley and pump to provide a ratio within the GM-specified rpm range. Race engine rpm differs greatly from street engines. For 30 percent less water pump speed and reduced weight and inertia, the crankshaft and water pump pulleys are smaller in diameter than standard reduction pulleys. Acceleration capabilities are greatly enhanced. Note: Crankshaft pulley will work with either water pump pulley without spacers.
( 3 )
$104.99
—
$114.99
Allstar Performance Pacer spindles primary purpose is to improve suspension performance in race car applications. Being forged from 4130 alloy steel, the Pacer spindles are designed for durability and considered stronger than standard stock units. The spindles modular design allows for the steering arm to be flipped, making the spindle interchangeable between the left and right sides of the vehicle. They offer a combination of design flexibility, compatibility with common components, and strength, which are advantageous features in race car construction and performance tuning.
Not Yet Reviewed
$174.99
Allstar Performance suspension limiters are available in single-bushing, double-bushing, and chain kit designs. Single-bushing limiters are used at the rear of the chassis to limit travel during acceleration "hike up" and control roll steer. Double-bushing limiters are used on the lift bar to control lift bar travel on deceleration. Both types absorb shock and help reduce tire unloading. Top plates are drilled to accept a 1/2 in. rod end for use with a shock mount, or to attach a weight jack bolt with 7/16 in.-20 internal threads. They include a clevis with a 3/8 in. hole for attachment of a chain or cable. Chain kit-style suspension limiters are also used to limit rear suspension or lift bar travel. The 3/16 x 18 in. long chain (can be cut to length) accepts a 3/8 in. bolt or pin, but may be modified to accept up to a 1/2 in. bolt. The included heat shrink sleeve installs over the chain to keep the chain in position and prevent binding.
( 1 )
$134.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
