Availability
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$350.00
—
$499.00
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$361.00
—
$475.00
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$268.00
—
$499.00
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$282.00
—
$475.00
Improve your factory end links with aFe Control PFADT Series heavy-duty sway bar end links. These 1/2 in. PTFE-lined rod ends give you quiet operation, and the sets include spacers and Grade 8 hardware. They are direct-fit replacements and are an excellent upgrade for cars with upgraded sway bars. aFe knows the correlation between good looks and great function is the best approach to high performance driving. Make an upgrade to your ride with aFe Control PFADT Series heavy-duty sway bar end links.
( 5 )
$268.00
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$361.00
—
$475.00
aFe Pro Series deep transmission pans bring performance engineering to the protection of your truck's transmission. Each pan offers increased fluid capacity over stock, and features internal and external fins that transfer heat from the fluid to the ambient air for maximum cooling. aFe Pro Series transmission pans are constructed out of durable aluminum with reinforced ribs for maximum strength, and are finished with a black powdercoat accented by machined fins for protection and styling. Select the one designed for your transmission. Additional notes: * Neodymium magnetic drain plug captures loose particles for maximum transmission protection * Threaded 1/8 in. NPT port is ready for use with your transmission temperature sensor * All necessary hardware
( 9 )
$379.05
—
$484.05
The aFe Momentum Pro Dry S air intake systems boost horsepower and torque, improve throttle response, and sound, offering excellent filtration with oil-free synthetic media for easy maintenance. That makes them ideal for daily drivers and light off-roading due to their convenient, reusable filter and sealed housing that ensures cooler, cleaner air intake for performance. Featuring a high-quality construction, the aFe Momentum Pro Dry S air intake systems have durable, custom-designed tubing and a sealed housing for a perfect fit and protection. The Pro Dry S filter uses three layers of synthetic media, providing great filtration efficiency without needing oil, which is perfect for dusty conditions. Being oil-free, the filter is hassle-free to clean and service, reducing upkeep compared to oiled filters. A little cold forced air goes a long way. Give your engine more power with one of these Momentum Pro Dry S air intake systems from aFe. Order the model for your application needs.
( 3 )
$372.00
—
$499.00
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$372.00
—
$433.00
aFe Street Series deep transmission pans bring performance engineering to the protection of your truck's transmission. Each pan offers increased fluid capacity over stock, and features internal and external fins that transfer heat from the fluid to the ambient air for maximum cooling. aFe Street Series transmission pans are constructed out of durable aluminum with reinforced ribs for maximum strength, and a raw finish accented by machined fins for protection and styling. Select the one designed for your transmission. Additional notes: * Neodymium magnetic drain plug captures loose particles for maximum transmission protection * Threaded 1/8 in. NPT port is ready for use with your transmission temperature sensor * All necessary hardware
( 13 )
$352.80
—
$403.20
The aFe Rock Basher exhaust systems are durable, purpose-built cat-backs for the 2018 Jeep Wrangler JL. They improve clearance over rough terrain for the adventurist who wants it all. The large 3 in. mandrel-bent 409 stainless steel tubing outflows restrictive factory exhausts, delivering gains of up to 9 hp and 8 lbs.-ft. of torque, as measured on aFe's in-house dyno. The free-flowing muffler delivers a power performance tone, while the Rock Basher's unique pre-axle turn-down tip handles off-road obstacles. These exhaust systems utilize factory mounts for a quick and easy install.
( 2 )
$403.20
—
$484.05
The aFe Takeda Stage 2 cold air intake systems produce up to 17 hp and 15 lbs.-ft. of torque over stock, while outflowing the factory intake by 21 percent. A one-piece powdercoated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. Order the model recommended for your vehicle and engine application. Additional details: * A dyno-tuned intake tube is used to smoothly direct the airflow into the engine with minimal restriction * The use of factory mounting locations ensures a quality fit while maintaining a simple, hassle-free installation * A reinforced silicone coupling is used to connect the tube to the throttle body for strength and durability
Not Yet Reviewed
$361.00
—
$395.00
Control Sway-A-Way coilover shocks by aFe feature zinc plated and steel cylinder bodies with clearcoat for exceptional corrosion resistance. They also feature specifically-formulated, fully-synthetic shock oil (7w) and a multi-seal carrier to ensure zero leakage. A special truncated thread design allows for removal of the included coilover hardware without having to completely disassemble the entire shock. Control Sway-A-Way coilover shocks by aFe feature: * 20-plus years of research/development and testing in nearly all vehicle types * Red anodized, CNC-machined aluminum components made to the strictest tolerances * Nitrobrite steel shafts polished for long seal life and harder than standard chrome shafts
Not Yet Reviewed
$433.00
—
$499.00
aFe Power offers throttle bodies for a variety of applications, including many Toyota vehicles from 2003 and up. Product details (model 46-39103): * Brand new 76mm throttle body * No tuning required * Plug-n-play electronics * Billet aluminum adapter * More power and better throttle response * Hardware and gasket included * Direct bolt-on for simple installation * Larger bore throttle body: This aFe Power 76mm throttle body and adapter kit improves engine airflow over the stock 65mm throttle body. The extra airflow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. *6061-T6 billet aluminum adapter: All adapters are constructed from 6061-T6 billet aluminum and are precision-machined for light weight, high strength, and perfect fit and finish. The serrated/swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel, creating a more complete combustion cycle—increasing horsepower, torque, and improving throttle response. * Simple installation: Throttle body kit uses all factory mounting locations, providing stability and a hassle-free installation. All needed hardware is included with the kit. * Installation note: Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).
Not Yet Reviewed
$352.80
—
$441.00
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$261.45
—
$498.75
These aFe Plug-n-Play throttle bodies are designed to improve engine air flow over the stock throttle body. The extra air flow will increase horsepower and throttle response. They will work with OEM or aFe cold air intakes. aFe Plug-n-Play throttle bodies include a 6061-T6 billet aluminum adapter, precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response.
( 2 )
$352.80
—
$498.75
aFe Magnum Force Stage 2 ST Pro 5R air intake systems outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, "oiled" conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. The systems are available for vehicles from the 1990s and up; order the model recommended for your application.
( 1 )
$372.00
—
$475.00
Upgrade your Corvette today with aFe Control PFADT Series engine mount sets—and see how much performance you've been missing! These engine mount sets are designed to replace the OE mounts with aFe upgraded polyurethane bushings, thus, improving vehicle launches, traction, and overall improvement in drivetrain feel. The engine mount sets consist of the following components, such as CNC-machined 6061 anodized mounts mated to nickel plated engine brackets via replaceable, quality polyurethane bushings, stainless steel positioning pins, and quality-grade hardware to help you to facilitate your upgrade—from start to finish!
( 2 )
$433.00
aFe Pro Series differential covers bring performance engineering to the protection of your axle's differentials. The durable cast aluminum construction with reinforced ribs provide maximum strength, while the machined fins and textured powdercoating provide a distinctive look. aFe Pro Series differential covers are available individually for front or rear with or without PRO Guard D2 synthetic 75W-90 oil and in complete sets with front, rear, and oil. Features: * Increased oil capacity * Internal/external ribs/fins transfer heat from oil to outside air for maximum cooling * Dual neodymium magnetic plugs--magnetic drain and deep reach fill plug—capture loose particles for maximum gear protection * Large oil level sight glass allows quick and easy oil inspection * Calibration plug set to the factory oil level to eliminate overfilling
( 21 )
$281.40
—
$454.65
aFe Control leveling kits are made from 6061 billet aluminum and provide a lift in the front for better off-road performance while also eliminating the "nose-down rake" notorious on stock trucks. Choose the set to fit your specific application. Features: * High-quality hardware for strength and durability * Red anodized finish for great looks * Increases front ground clearance * Easy bolt-on installation, requires no modifications, can be done at home with the proper tools and safety precautions * Installing these spacers does not require disassembly of the strut/spring
( 7 )
$296.10
aFe Takeda Momentum Pro 5R cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly * Pro 5R pre-oiled 5-layer progressively finer mesh cotton media for maximum airflow * Unique (patent pending) filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 9 )
$323.00
—
$499.00
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 19 )
$257.25
—
$498.75
aFe Momentum HD Pro 10R air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro 10R intakes are designed around massive, 1,000 cfm, 360 degree, radial-flow air filters with ten layers of progressive cotton media providing 99.59 percent cumulative efficiency (independently tested). Their unique air filter-to-housing interface allows for maximum filter size that increases the available air volume while simplifying the installation process. In addition, the air filters are wrapped in reinforced metal providing maximum strength to help to prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style * Patent pending air filter-to-housing interface design
( 6 )
$420.00
—
$475.00
aFe Power offers supercharger power pulley kits for a wide range of applications—including many Dodge, Jeep, and Ram cars and trucks from 2015 and up. These bolt-on kits will enhance your engine's performance. By changing the pulley diameter, you can adjust the spin rate of the supercharger, resulting in increased boost and amplified power. The aFe pulley kits are meticulously crafted to achieve a perfect equilibrium of lightweight design and high strength through precision machining. You can count on them for optimal functionality, a flawless fit, and an impeccable finish, ensuring a seamless boost to your engine's power. The pulleys are available in a variety of diameters; order the model recommended for your vehicle. Additional details: * Pulleys crafted from high-quality 6061-T6 billet aluminum showcase exceptional characteristics. Through precision machining, these pulleys achieve a remarkable balance of light weight and high strength, ensuring not only optimal functionality but also a perfect fit and finish. * Pulley kits feature a 17-4 stainless steel hub, combining corrosion resistance and high strength through precision machining, ensuring a perfect fit, impeccable finish, and optimal functionality. * Please note that special tools are required for removing the factory pulley from the supercharger snout, and aFe recommends professional installation for the kit to ensure seamless performance. * Black hard anodized finish * Laser-etched logo and sizing * Includes screws, washers and Thread Locker * Tuning is recommended * Smaller belt not required
Not Yet Reviewed
$296.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
