Availability
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$162.95
$105.95
—
$111.95
AEM Electronics high-output, insulated gate bipolar transistor (IGBT) inductive Smart Coils are designed for use on applications that do not have an external ignitor. The tradeoff between adequate spark energy and adequate spark duration ends with AEM's inductive Smart Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running high compression, high RPM, forced induction and/or nitrous engines. AEM's inductive Smart Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts! That's as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration. Smart Coil's feature a weather and shockproof design that can be mounted directly to the engine, and they cost less than other aftermarket LS coils. Upgrade your ignition on your forced induction, nitrous, or high RPM engine today with AEM Electronics IGBT inductive Smart Coils.
( 2 )
$87.15
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$54.45
—
$70.79
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$111.95
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.
( 11 )
$93.69
—
$108.95
AEM Electronics high output inductive dumb ignition coils ain't so dumb! Designed to be used with an igniter, these AEM "dumb" coils offer CDI-like spark energy and voltage, plus the longer spark duration of inductive coils--and that's pretty smart! But that's not all. They easily install in the place of your existing coils, are shock and weather-proof, affordable, and they deliver world-class performance. That makes you smart for choosing them! If you want massive spark energy with an incredibly long spark duration, AEM high output inductive dumb ignition coils are an intelligent solution for any enthusiast running boost, nitrous, or high rpm.
( 2 )
$87.15
AEM Electronics 4-Port AEMnet CAN Hubs eliminate the need to daisy-chain multiple AEMnet devices together using Y-cables. Now you can easily connect and power multiple AEMnet CAN devices from a central docking station! The four integrated 4-way DTM-style housings provide a reliable AEMnet CAN connection and are safe for engine bay mounting. AEM Electronics 4-Port AEMnet CAN Hubs include the following: * 4-Port AEMnet CAN Hub * Two 4-40 x 7/8 in. flat head screws * Two 4-40 x 0.375 in. washers * Two 4-40 x 9/64 in. Nylock nuts
( 1 )
$99.95
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
Restore the performance of your high-mileage fuel pressure regulator with AEM Electronics fuel pressure regulator rebuild kits. You'll regain the accuracy and performance that your regulator had when it was new.
( 1 )
$65.35
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
—
$87.15
AEM Electronics cam angle sensor discs are 24-tooth direct replacements for the factory CAS discs and may be necessary with some Series 1 or 2 EMS when you need to run a different CAS. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor, and match the hubs of your disc to your AEM disc before ordering.
( 1 )
$54.45
AEM cam angle sensor discs are for use with AEM programmable engine management systems. They are a direct replacement for the factory crank angle sensor disc in select applications. Cam angle sensor discs help you eliminate sync issues. (Before purchasing, be sure that the center of the AEM cam angle sensor disc looks exactly like the stock disc in your distributor. Match the hubs of your disc to the AEM disc before ordering.)
( 4 )
$54.45
AEM Electronics No-Weld O2 sensor mounts enable users to mount a wideband O2 sensor without having to weld a sensor bung onto the exhaust. This is especially helpful for those that don't know how to weld or can't find someone that does. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy!
( 23 )
$66.45
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
$64.95
Fuel pulse dampers, or pulsation dampers, act in tandem with the fuel pressure regulator to ensure stable and consistent fuel delivery to the engine. They do this by smoothing out the pressure fluctuations, or pulsations, caused by the injectors opening and closing, as well as the fuel pump operating. AEM Electronics fuel pulse dampers feature billet aluminum construction with an anodized finish and are ideal for applications with large fuel injectors and high-volume fuel pumps. They are compatible with any fuel and available as a direct-mount or in-line style with a standard or extended psi range. Select the best fit for your fuel system.
( 1 )
$108.95
AEM offers 30-amp and 20-amp relay kits for ensuring that your vehicle's electric-powered accessories receive the correct current and voltage to perform at their rated performance numbers. Both wiring assemblies and harnesses feature auto-reset style integrated circuit boards that help ensure quick remedies for any electrical shorts. Each kit includes a pre-wired relay receptacle with 80 in. of red wire (activation) and 80 in. of black wire (high-current ground circuit), an amp relay, circuit breaker with mounting tab, crimp terminals, and mounting hardware. Activate pumps, fans, NOS systems, and more with the proper AEM Electronics relay harnesses for your application. Product notes and features include: * 20-amp kit (12 ga. wire) specifically designed for use with AEM (and other) high-flow in-tank fuel pumps * 30-amp kit (10 ga. wire) safeguards the performance of nitrous heating blankets, water pumps, fans, alternators, starters, and other auxiliary electrical accessories that require higher currents
( 1 )
$65.35
AEM Electronics' BMS connector plug and pin kits are the replacement connectors for their battery management systems Master and Satellite modules for VCU. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV battery management systems with their BMS plug and pin kits.
Not Yet Reviewed
$68.65
On Sale
AEM Electronics dual channel analog current sensors play a critical role in EV drive systems. Their job is to measure current in and out of the vehicle's high-voltage battery pack and report this data back to the VCU to be used for battery current limiting and management, as well as energy tracking. AEM dual channel hall-effect current sensors are offered in three amperages. Select the one needed for your application. Notes: * Dual Channel range ±75 amps for Channel 1 and: -- ±500 amps for Channel 2 -- ±750 amps for Channel 2 -- ±1000 amps for Channel 2 * Operating temperature range of -40 to 257 degrees F
Not Yet Reviewed
$118.95
$65.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
