Availability
Designed with street and bracket racers in mind, AED HO-Series carburetors offer crisp throttle response, great drivability, and killer acceleration. These carbs feature CNC-machined and deburred main body surfaces, high-flow boosters and metering blocks, four corner idle, a milled choke horn, dual accelerator pumps and vacuum ports, and non-stick, reusable gaskets. All AED carburetors are tested and tuned before shipping, employing their state-of-the-art, planet-leading, computerized "wet-flow bench." They'll provide you with properly matched and balanced fuel delivery and a controlled metering signal and strength, no matter what your speed. HO-Series carburetors are available for aspirated engines, alcohol, blower, and marine applications. AED HO-Series carburetors unite "off-the-shelf" high performance with an affordable price.
( 66 )
$729.95
—
$974.95
AED Billet HO-Series carburetors are designed for single 4-barrel normally aspirated engines with the Pro-Street and bracket racer in mind. They feature a clean idle, crisp throttle response, and killer acceleration. These carbs are available in different double-pumper sizes and have been run, adjusted, and tuned on a test engine before shipment to ensure the utmost quality. Get the performance you want for the street and track when you order the AED Billet HO-Series carburetors best suited for your build.
( 18 )
$664.95
—
$739.95
AED HB-Series blower carburetors are designed specifically for roots-style blower applications. They feature billet metering blocks, boost referenced power valves, wet flow technology, fully machined conventional main bodies for additional signal strength and response providing exceptional acceleration. All AED HB-Series blower carburetors are blueprinted and tested for maximum performance right out of the box.
( 5 )
$744.95
—
$799.95
AED has combined every possible add-on feature and incorporated it into each of these Ultimate Performance carburetor kits to give you longer-lasting and improved performance from your Holley carburetor. Most of the features that you would buy separately are already included. Features include: * High-flow needle and seats * Nylon reusable needle and seat gaskets * Nylon reusable bowl screw gaskets * New brass idle mixture screws * New needle and seat nuts and screws * New accelerator pump squirter check valves * Special no-leak fuel inlet gaskets * Non-stick bowl and metering gaskets
( 85 )
$46.99
—
$98.99
AED Pro Tunnel Ram linkage kits are absolute musts for the unruffled operation of sideways mounted carburetors. These linkage kits are built with aircraft-quality components, including left and right hand Heim joints for precise metering with virtually no flex for reducing pedal pressure or eliminating over-center issues. AED Pro Tunnel Ram kits include instructions for a no-guess install and their universal fit will work with most carburetor and manifold applications.
( 12 )
$144.99
—
$199.99
AED manufactures a complete line of billet CNC metering blocks in-house to provide the ultimate in fuel curve tuning and adjustability. They offer standard billet blocks with fixed-orifice sizing (idle fuel and power valve restriction channels are adjustable) for all emulsion circuits. Versions for gas, alcohol, and E85 setups are available. Get a knockout baseline tune-up right out of the box with the AED billet metering blocks best suited for your application!
( 10 )
$89.99
—
$127.99
When you want to fully restore your AED or Holley Carburetor to its original look and quality, these AED Pro-Series carburetor kits are the answer. They include all of the great components of AED's famous Ultimate Performance carburetor kits, plus the additional hardware that corrodes, wears out, and plain just looks miserable over time. The kits also include a new non-stick bowl and metering gaskets. Additional features include: * New bowl screw and pump nozzle screws * New pump cover and throttle plate screws * Needle and seat nuts and screws * Base plate screws and idle mixture screws * Idle speed position screw and idle speed spring * Sight plug screws and secondary connecting link * Miscellaneous clips, pins, and hardware
( 8 )
$66.99
—
$94.99
AED carburetor kits include all of the necessary components to successfully rebuild and restore your Carter 9000 series and Edelbrock Performer series carburetors to their original condition. AED makes the rebuilding process easy and convenient by including all of the gaskets, needle and seats, clips and accessories, an accelerator pump, and instructions in one complete kit. Now you can buy one kit to service either of these fine carburetors. In many cases, float replacement is required to achieve maximum performance.
( 42 )
$64.99
AED offers these needle and seat assemblies for alcohol applications. These stainless steel needle and seats provide the ultimate in fuel capacity and seating ability when optimum fuel flow is required. All assemblies come complete with AED's special reusable needle and seat gaskets.
( 5 )
$11.99
—
$16.99
AED billet throttle linkage and spring brackets shine with cool, customized looks and perfect performance under your hood. These combination linkage and spring brackets offer CNC-machined billet aluminum linkage plates in four anodized finishes. They not only provide you with strength and durability, but they also allow you to customize and enhance your engine compartment. AED billet throttle linkage and spring brackets are designed for Holley and AED carburetors, include all hardware (no additional parts are needed), and pass spring retention requirements for all sanctioning bodies. Impressive looks and superb performance at a small price--that's the AED advantage.
( 85 )
$74.99
—
$89.99
AED offers a complete selection of accelerator pump cam kits with varying opening rates and delivery volumes. They allow you to fine tune your accelerator pump requirements to your engine performance needs.
( 16 )
$25.79
AED traditional needle and seats are designed for applications that are up to 650 hp on gas. These assemblies come complete with special reusable needle and seat gaskets.
( 11 )
$14.99
AED's Pro-Series billet metering blocks feature totally tunable, screw-in, replaceable bleeds in all circuits. They feature a special-length circuit with five separate emulsion bleeds. If you're a serious tuner trying to fully maximize your combination, then these are a must! Billet blocks are available in two and three circuits with gas or alcohol. All billet metering blocks are machined from billet 6061 stock and anodized for appearance and protection.
( 1 )
$119.99
—
$127.99
AED air bleeds are designed as replacements for use with their air bleed kits. They are available in a choice of sizes.
( 9 )
$14.99
AED Hi-Flow carburetor needle and seat assemblies are must-haves for any HP application. They help you maintain that constant fuel level that is so important for consistency and low ETs—making them ideal for drag racing, superchargers, and blow-through applications. Get that AED performance edge with the AED Hi-Flow needle and seat assemblies best suited for your application.
( 1 )
$14.99
AED billet Edelbrock linkage brackets shine with cool, customized looks and perfect performance under your hood. These combination linkage and spring brackets offer CNC-machined billet aluminum linkage plates in two anodized finishes. They not only provide you with strength and durability, but they also allow you to customize and enhance your engine compartment. AED billet Edelbrock linkage brackets are designed for Edelbrock and Carter AFB carburetors with all hardware included--no additional parts are needed. Impressive looks and superb performance at a small price--that's the AED advantage.
( 12 )
$74.99
—
$90.99
AED non-stick fuel bowl gaskets are durable gas and alcohol-resistant gaskets that can be reused several times without becoming tacky or leaving bits that need to be scraped off. You can now make jetting changes without having to constantly replace your gaskets. These totally stick-resistant, blue fiber compound gaskets will make your carburetor tuneups a lot easier to manage.
( 8 )
$14.99
If you've ever fine-tuned the vacuum secondary spring on your Holley carburetor, then you know what a pain it can be to keep disassembling the housing. These AED vacuum secondary quick-change kits with springs allow you to easily swap out vacuum advance springs for efficient tuning between rounds.
( 26 )
$30.79
Over time, OEM carb fuel bowl screw gaskets can become fuel-soaked and deteriorate, which can lead to fuel leaks. These AED white nylon carb fuel bowl screw gaskets are designed to not absorb fuel or separate and can be reused many times.
( 11 )
$10.99
AED features two styles of discharge nozzles for accelerator pump circuit tuning--standard and tube-style. These squirters are available in a variety of sizes to suit your needs. AED recommends tube-type squirters when additional top-end fuel enrichment is required.
( 12 )
$12.99
—
$19.99
AED originally designed these Birchwood carb spacers for racing but soon discovered their benefits for street cars, eliminating the hot soak and vapor lock problems associated with high underhood temperatures. These Birchwood carb spacers by AED feature a special coating to promote sealing and offer a great look. They come available in 1/2 in. and 1 in. heights for different configurations to suit your needs.
( 10 )
$40.79
—
$59.99
AED Holley fuel bowl screws are perfect for installing new fuel bowls or for replacing old, worn-out screws. They have 5/16 in. hex heads and come with reusable bowl screw gaskets. They fit Holley 4150 and 4160-style carburetors.
( 18 )
$14.99
—
$17.99
Make setting float levels quick, safe, and easy! AED see-through bowl sight plugs are made of a clear acrylic material so that you can keep an eye on float levels without the daunting task of having to remove the sights plugs.
( 39 )
$14.99
AED needle and seat gaskets are high-quality gaskets. These gaskets are reusable and are the same gaskets that come with AED's needle and seat assemblies.
( 13 )
$8.99
—
$9.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
