Availability
Reduce vibration and extend the life of your engine's components and accessories with Advance Adapters top-quality, proven-design motor mounts. For some of the bases that require welding, a temporary bolt-on solution allows you to drive your vehicle to the welding shop of your choice. Select the Advance Adapters engine swap motor mounts designed for your vehicle application.
( 124 )
$47.92
—
$272.70
Advance Adapters NV4500 transmission mounts are made from quality rubber and will fit and perform like originals, keeping vibrations to a minimum and providing the support needed.
( 1 )
$41.93
Advance Adapters transmission mount crossmember kits are designed to bolt to the back of the transmission and then be bolted in between the frame rails. They're manufactured from durable steel and include all necessary mounting hardware. Some stock transfer case linkages may interfere with one set of mounting holes on this support; in this case, you may be required to cut a section on the mount off.
( 5 )
$82.94
Advance Adapters power steering box mounting plates support your Saginaw steering box. These steel brackets provide stability and secure positioning of the box to the front driver side frame rail, and ample surface area for a complete perimeter weld. Installing your power steering box has never been easier, thanks to Advanced Adapters.
( 4 )
$76.56
Advance Adapters NV3550 crossmember kits are designed to bolt to the NV3550 transmission and allow you to retain the stock Peugeot muffler support and rubber mount. The plate offsets the Peugeot rubber mount forward from the NV3550 mount holes to line the rubber mount with the stock slots in the crossmember. The stock slots in the crossmember support may need to be elongated slightly.
( 6 )
$43.37
Advance Adapters transmission support mounts offer a machined provision to help support your Advance Adapters transfer case adapters (some fabrication may be required depending on your application.) Order the Advance Adapters transmission support mounts designed for your application and get ready to hit the trails!
( 7 )
$28.39
—
$35.46
When installing a new transmission, a new crossmember is mandatory. Advance Adapters offer two types of crossmember designs. The most popular design bolts on the back of the stock transfer case. There is a 6-bolt cover that must be removed and one of these new crossmembers bolted in its place. These crossmembers extend to the inner frame rails. They are supported by L-brackets that must be welded to the frame rail. These components are insulated on rubber cushions. These crossmembers are recommended for use with all transfer case adapters, except when using a TH-350, 700R, or TH-400.
( 3 )
$191.68
—
$245.66
The steering shaft assembly connects directly to our steering spud shaft. This collapsible slip steering shaft extends to the firewall and can be adjusted to any length. With a 3/4 in. DD connection (round shaft having 2 flat surfaces), it is easily coupled to any of the yokes supplied in the kit or listed under the Custom Steering Column subheading. These kits require welding on the steering box mounting plate, frame enclosures, and firewall mounting plate.
Not Yet Reviewed
$717.79
Advance Adapters steering shaft kits help you gain a proven advantage in steering performance. Your pre-1971 Jeep steering more than likely has a problem of excessive play or backlash. To remedy that, you've decided to do a Saginaw conversion—and these Advanced Adapter kits will assist you in completing that performance modification. The components are all designed with the highest quality materials to provide the best service possible. Gain better control of your rig on and off the highway with a conversion that includes an Advance Adapters steering shaft kit.
( 1 )
$636.41
Advance Adapters offers transmission crossmembers for a variety of vehicle and transmission applications. These durable steel reinforcement kits are tailored to each model and are available for classics from the 1960s and up. Order the support recommended for your ride.
Not Yet Reviewed
$141.68
Replace your worn-out pitman arms with these Saginaw pitman arms. These Advance Adapters Saginaw pitman arms are designed for use with Land Cruiser and Jeep Saginaw power steering conversions.
Not Yet Reviewed
$92.25
Advance Adapters stock engine motor mounts include steel brackets and rubber bushings to help secure your engine. The high-quality parts are designed to meet or exceed OE specifications, ensuring an easy installation and dependable performance. Order the motor mounts recommended for your engine application.
Not Yet Reviewed
$13.32
Advance Adapters tie rod ends are stock replacements that they utilize in their Saginaw steering conversions, but they are also sold separately. The taper matches the steering knuckles of early CJ's and Advance Adapter pitman arms, both power and manual. They are also available with a center drag link socket to fit 1966-73 Jeepster Commando models with rear-mounted steering gears and Forward Control FC-170 models with front-mounted steering gears.
Not Yet Reviewed
$41.03
—
$46.12
The steering shaft assembly connects directly to our steering spud shaft. This collapsible slip steering shaft extends to the firewall and can be adjusted to any length. With a 3/4 in. DD connection (round shaft having 2 flat surfaces), it is easily coupled to any of the yokes supplied in the kit or listed under the Custom Steering Column subheading. These kits require welding on the steering box mounting plate, frame enclosures, and firewall mounting plate.
Not Yet Reviewed
$636.41
Advance Adapters offers steering U-joints for fitment on a variety of vehicles. Most of the standard-style units are machined from steel with a natural finish. Order the size recommended for your application.
Not Yet Reviewed
$95.60
These Saginaw relay rods from Advance Adapters have one end that is threaded to accept an OEM-type metric lower relay rod end, and an upper thread special relay rod end that fits Advance Adapters pitman arms. These relay rods feature standard tubing and are 26 3/4 in. long.
Not Yet Reviewed
$51.45
Advance Adapters offers crossmember kits for mounting New Venture 4500 (NV4500) transmissions. The steel brackets and rubber bushings will help secure your transmission from noise and vibration. NV4500 models are found on a variety of 1960s and '70s Ford Broncos, in particular.
Not Yet Reviewed
$77.27
Advance Adapters offers tie rod clamps for a variety of Jeep and Willys applications spanning several decades. These steel components are designed to work with steering conversion kits. They can be used for the left or right tie rod assembly, inner or outer position.
Not Yet Reviewed
$7.43
Advance Adapters offers Saginaw manual steering conversion spud shafts that also include the spud shaft clamp. (Note: As of May 2013, Advance Adapters began updating its steering spud shafts to a male double-D design. The shafts have been updated and will require a different yoke, P/N 716841.)
Not Yet Reviewed
$114.23
Advance Adapters scab plates are welded on the frame for extra-strength when doing an engine conversion. They reinforce points on your frame which may be cracked, especially before attaching motor mounts or the transmission crossmember.
Not Yet Reviewed
$15.57
Advance Adapters steering box relocation mounts help facilitate high steer and spring over kits. The plate relocates the steering box forward by 1 in. Advanced Adapters kits supply bolts and lock washers to remount the steering box to the new plate. Please note: You will need to reuse the four bolts that held the stock mounting box plate to the frame. The two lower bolts had sleeves that will also need to be retained and shortened.
Not Yet Reviewed
$123.20
Advance Adapters Ford Bronco crossmembers make transmission installation and removal quick and easy. They're designed to fit the NV3550 transmissions in 1966-77 Ford Broncos.
Not Yet Reviewed
$212.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
