We’re still here and shipping orders—let’s build It together. Learn more.

In-Store Pickup Location

Chevrolet Performance Valve Springs 12499224

Chevrolet Performance 12499224 - Chevrolet Performance Valve Springs
  • Chevrolet Performance Valve Springs

    Chevrolet Performance Valve Springs

Now Playing: Chevrolet Performance Valve Springs

Loading media

In progress

Valve Springs, Beehive, 90 lbs. @ 1.8 in., 295 lbs @ 1.250 in., .570 in. Maximum Lift, LS6/LS2, Set of 16

Estimated Ship Date: ...Loading Tuesday 5/26/2020
Would you rather pick it up? Select Location

Brand: Chevrolet Performance

Manufacturer's Part Number: 12499224

Part Type: Valve Springs

Product Line: Chevrolet Performance Valve Springs

Summit Racing Part Number: NAL-12499224

Valve Spring Style: Beehive

Number of Springs Per Valve: Single

Outside Diameter of Outer Spring (in): 1.290 in.

Coil Bind Height (in): 1.200 in.

Damper Spring Included: No

Spring Rate (lbs/in): 375 lbs./in.

Valve Springs Coated: No

Quantity: Sold as a set of 16.

Notes: GM production 2004-04 LS6 Corvette Z06 valve springs.

In-Store Pickup: Choose In-store pick-up (OH, NV, GA, TX) on our web site.

Chevrolet Performance LS6 valve springs (part no. 12499224) are the same as those utilized on the C5 Corvette Z06 performance package. Designed to easily handle valve train stress and increase RPM in high-horsepower applications, these beehive valve springs offer a maximum valve lift of .570 inch. They are available in a set of 16.


Questions & Answers Ask a Product Question

These valve springs came in the mail from Summit today and are a dark navy blue rather than a bright blue, made in Mexico, and some of the paint is chipped/worn off. Is this what everyone else has been getting? Just wanted to double check. See attached pictures.

Asked by OMAR on September 13, 2017


Mine were new with no chips nor were they worn

DEXTER from MS answered on September 25, 2017

Answer This Question


i have 1996 vortec heads on a 400 chev..i need these springs..please advise me of the retainers and collets needed to instal these right on without machine work.

i need all the bits needed to install these springs on my stock heads..i am in australia and hot to get it right first time.

thank you

Asked by STEVEN on November 22, 2017


The springs say they are for a ls style engine. If you have a Chevy 400 then you have the wrong application.

CLAYTON from CO answered on November 27, 2017

Answer This Question


Can these springs be used on the 906 Vortec heads? I already have the valve guides machined for more retainer to seal clearance and .530" diameter valve stem seals, but am wanting to upgrade the springs for the .460" IN and .480" EX cam that I am using. If these would work, What retainers and locks do I use?

Asked by MARK on April 14, 2017


Yes, you should have just installed these springs and the comp cam retainers and you were good to go. You machining the top of guides will only allow more lift, if that what you are after. My experience with this ls spring and comp cam retainers er setup on non machined factory Vortec heads was a max of .550 lift before the comp retainer hitting the factory seals. I'm also running a .480 lift cam.

ALFONSO from CT answered on May 21, 2020

Answer This Question


Doing an LS swap in a 66 LeSabre. Will these work on an 02 Avalanche 5.3 with 02 TransAm Stock cam?

Asked by TJ on November 02, 2016


Thank you for your question. Chevrolet Performance 12499224 will work for your application.

Summit RacingSummit Racing Answer - November 04, 2016

Answer This Question

Most Helpful Reviews Review This Product

Some parts are not legal for use in California or other states with similar laws / regulations

Back To Results
Email this page