JavaScript Disabled

Your JavaScript appears to be disabled. JavaScript is necessary for various functions, such as order checkout, to operate on this web site. Please ensure that JavaScript is enabled.

Outdated Internet Browser Detected

Your web browser appears to be out of date. Soon you will not be able to create a secure connection to our web site using TLS 1.0. Please upgrade your browser from current version( ). Learn more about TLS.

In-Store Pickup Location

Fel-Pro Performance Intake Manifold Gasket Sets 1205

Gaskets, Manifold, Intake, Printoseal, 2.09 in. x 1.28 in. Port, .060 in. Thick, Chevy, Small Block, Set

Estimated Ship Date: Loading...Processing Today Would you rather pick it up? Select Location

Results 1 - 9 of 9

Ask a Product Question
Q:

Will these work on a stock 350 chevy.

Asked by TYLER on December 05, 2017

A:

Yes

MARC from PA answered on December 07, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes but I'm not a fan of the cork valley gaskets

JONATHAN from TX answered on December 08, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes

JONATHAN from VA answered on December 10, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes, it matches the port size of the Edelbrock performer rpm manifold.

MANFRED J from MI answered on December 08, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes, but this felpro gasket is designed for aftermarket intake.
There is a felpro gasket for stock intake It's a little smaller hole on intake.

PHIL from CA answered on December 07, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

+See All Answers (12) Answer This Question

Q:

Do these work on 1986 cast iron L98 heads in a c4 vette?

Asked by JOSEPH on August 29, 2017

A:

Yes

DAVID from TX answered on September 11, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

If the port size is not too big, yes they will work. I have then on my '85 Vette but I am running the aluminum Dart heads. Check the suggested part number and note port size, then compare them with the port sizes of these gaskets. I'm almost positive these will work just fine on the stock L98

CHUCK from IL answered on September 05, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes this gasket will fit. The ports are a little bigger than the TPI intake ports and the head ports but will work just fine. I used this gasket and port matched the heads on my 1990 corvette for a little extra flow.

MIKE from OH answered on August 30, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes they will work but you have to use a lot of silicone

KENTHERY from AL answered on August 29, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Not for sure but I think it takes the later model. 1986 and up

KENNETH from TN answered on September 16, 2017

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

+See All Answers (7) Answer This Question

Q:

Cork or rubber front and back seals I want rubber ones

Asked by WILLIAM on April 08, 2018

A:

Throw those seal gaskets away,they will leak and use a 1/4" bead of silicone (RTV) instead. Good instructions on U Tube.

ARTHUR from United States answered on December 10, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

The package comes with cork. However I don't use either the cork or the rubber. Instead I put a bead of silicone on the end rails and a touch on the bottom of the intake manifold ends. You won't have to worry about gaskets squeezing out and will be leek free. FelPro also makes a 1205 S-3 which is the same gasket except it has a steel shim sandwiched in the middle preventing the gaskets to be sucked in between the ports.

JAMES P from NY answered on April 10, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Cork, but I don't use either. A nice 1/4 inch bead of Permatex The Right Stuff let it sit 10 minutes before assembly no leaks !!

KEVIN from OH answered on April 10, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

I could find the felpro 1205- S 3 as you stated on this?

Please advise??

Thanks,Jeff

JEFFREY D from AZ answered on December 07, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

rubber works best for me with a little sealer on them.

MEL from MI answered on April 10, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

+See All Answers (6) Answer This Question

Q:

Will these work on edelbrock aluminum heads on a small block 350 chevy ?

Asked by GEORGE on October 21, 2016

A:

Yes it depends on how big you Inlarge ports. I use gasket for patern for port size.

BRUCE from CA answered on October 22, 2016

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes

JOHN A from MI answered on October 24, 2016

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Fel-Pro gaskets are the best!! The 1205 can be used on most SBC head applications. In some cases the 1205 might be slightly larger than the intake runners, not a problem! Always mock-up the fit of everything before installing.
DO NOT use the end gaskets. Apply a smooth 1/4" continuous bead of silicone on the block (after cleaning both block and manifold with lacquer thinner)

DANIEL from CA answered on October 23, 2016

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes, they should work on E-street, Performer, and Performer RPM heads. But, if you have E-series or Victor Jr heads, you will need a 1206 fel pro gasket for the taller intake ports.
Logan

LOGAN from WV answered on October 23, 2016

1 of 1 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Answer This Question

Q:

are the heat riser ports blocked ?

Asked by R on December 18, 2018

A:

Yes,just with gasket material.

DANIEL from ID answered on December 19, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

Yes

PETER from FL answered on December 20, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Answer This Question

Q:

does the blue rings on the gasket face up? and do I have to use gasket sealer my heads to set the gasket on

Asked by MIKE on September 17, 2016

A:

Blue rings up and yes use 3M yellow weatherstrip and gasket adhesive to hold them in place. I also put permatex on the bottom corners where the intake gaskets meet the cork gaskets between the intake and block.

JESSIE from LA answered on September 18, 2016

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel
A:

blue ring faces up and if you get the surface really clean it will seal without sealer, but sealer never hurts

HENRY from GA answered on September 19, 2016

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Answer This Question

Q:

Will these work with world sportsman 2 heads

Asked by JOSE on March 14, 2019

A:

I recommend checking the port dimensions, our 1205 measures 1.28" x 2.09"

Fel-Pro Fel-Pro Answer - March 18, 2019

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Answer This Question

Q:

Is this the right gasket for the Chevrolet performance 350/290 engine.

Asked by MICHAEL on January 01, 2019

A:

As long as the port size dimension match your cylinder head, yes.

Fel-Pro Fel-Pro Answer - January 02, 2019

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Answer This Question

Q:

do these gasget need sealer on the water ports

Asked by MARK on August 10, 2018

A:

yes, a very small amount (thin layer) of silicone.

STEPHEN T from NY answered on August 11, 2018

0 of 0 found this answer helpful.

report abuse

Report Abuse X

If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Answer This Question

  • 1
  • 1 of 1

Some parts are not legal for use in California or other states with similar laws / regulations

Back To Results
Email this page
Sign Up for Email X