Brand:

Summit Racing

Manufacturer's Part Number:

Part Type:

AN Hose

Product Line:

Summit Racing™ Braided Nylon Hose

Summit Racing Part Number:

UPC:

190861009660

Hose Size:

-8 AN

PTFE Lined:

No

Hose Length (ft.):

20.00

Outer Material:

Braided nylon

Hose Color:

Black

Hose Material:

Nitrile rubber

Hose Inside Diameter (in.):

0.430 in.

Hose Outside Diameter:

0.640 in.

SAE Rating:

J30R7

Maximum Recommended Temperature:

275 degrees F

Maximum Operating Pressure (psi):

350 psi

Quantity:

Sold individually.

Notes:

For fuel-injected applications, we recommend upgrading to our Summit Racing™ PTFE or Premium Braided Nylon AN hoses, which are better suited for continuous exposure to modern fuels and fuel injection pressures.

Special Attention:

This AN hose utilizes a CPE (Chlorinated Polyethylene) inner liner, which is not intended to last indefinitely, particularly when used with fuel applications. Service life may be significantly reduced when the hose is exposed to excessive heat, routed near exhaust components or other high-temperature sources, used with high-ethanol fuel blends, or left unused for extended periods. Hoses should be inspected at least annually for signs of wear, cracking, hardening, swelling, leakage, odor permeation, or other deterioration. Replace the hose immediately if any of these conditions are present to prevent fuel leaks, fuel vapor emissions, and potential fire hazards. Warning: This hose is designed for low-pressure carbureted fuel systems only. Do not use this hose in fuel-injected applications, as the operating pressures exceed the hose's intended design limits and may result in hose failure, fuel leakage, severe vehicle damage, personal injury, or fire.

Recommended Hose Ends:

Summit