Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels
Wheel Vintiques 62 Series Ford-Chevy Style O.E. wheels come to you in primer and ready for your finishing touch. Featuring a 2-piece construction, these steel wheels are an easy way to upgrade the look of your car or truck. The wheels can be painted to the exact color you want so you can easily customize these wheels to your own unique style. They come in a variety of diameters, widths, bolt patterns, backspacing, offsets, and center bores.
Wheel Vintiques 62-451203 have 3.00in. backspace and 79mm bore center but I'm looking for wheel 14in.x 5in., 5 x 4.5in. Bolt circle, 3.5in. Backspace, 12mm Offset, 61mm Bore center diameter for 68 Mustang 289-2V. Have you got this product?
Asked by DARD on 3/5/2019
Thank you for your question. The Wheel Vintiques 62 Series wheel is not available in the requested 3.5 in. backspacing option. We currently have Wheel Vintiques 62-451203. This wheel has the following specs.
Diameter - 14 in.
Width - 5.0 in.
Bolt pattern - 5 x 4.5 in.
Backspacing - 3.0 in.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Would this wheel fit a 1963 impala on the rear with disc brakes . I have a 79 Cadillac caliper on an 11” rotor. Thanks
Asked by FRANCISCO on 4/23/2022
The Wheel Vintiques 62-461204 Wheels will not fit a 1963 Chevy Impala. This wheel has a 5x4.5 bolt pattern which is not correct. The Wheel Vintiques 62-463404 Wheels will fit that application, however due to the vehicle having different brakes test fitting will be required to check for proper clearance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Hello Francisco. The WVI-62-461204 has a 5x4.50 bolt pattern that will not work on your 1963 Chevy Impala. Also depending on what model 1979 Cadillac you have, the year Cadillac came with two different bolt patterns. Also the 1979 Cadillac Seville and El Dorado came with a 5x4.75 bolt pattern. The 1979 Cadillac DeVille and Fleetwood came with a 5x5 bolt pattern. Make sure you check your bolt pattern, do some backspace measuring, and run a test fit to ensure you order the proper wheel.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
MAYBE - I TOOK THE TIRE OFF AND MEASURED THE RIM ON THE TRUCK, 6 IS THE WIDTH, NEED TO MEASURE BOLT CIRCLE, AND BACKSPACE
THE INTERNET HAS INFO HOW TO MEASURE
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I have a 10" inside diameter AMC dog dish hubcap. The indents look the same as my stock wheel, but wanted to be sure. Are there measurements somewhere that show how far the 3 bumps are apart from each other?
Asked by JAMES on 4/12/2021
This wheel normally takes a 10 1/8 " inside dia. hubcap and mounts over the 3 nobs
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these rims fit a 1959 Ford Thunderbird?
Thanks,
Tom
Asked by THOMAS on 10/19/2019
Thank you for your question. Wheel Vintiques 62-461204 wheels are a 14 in. diameter by 6 in. wide with a 4.00 in. backspace. You will need to measure for clearance, please see our Instructions sheet for detailed steps on where and how to measure for fitment.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
What is the inside wheel diameter from the back? I need at least 13" to clear disc brake calipers from Wilwood or Leeds.
Asked by Customer on 2/10/2026
Q:
Will these fit a 1964 impala SS with a basic summit disc brake kit?
Asked by ERIC on 5/20/2018
I am almost positive they will. I added discs to my 64 GTO that has GM type discs. These wheels are just like OEM wheels on the early 70's cars that came with discs. The back side has the clearance for the calipers. Summit will also let you return them if they don't fit.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
I have a 1963 impala and I change front and back with summit disc brakes kit . I have 14" stock rims . To make it all work I change my rims to the vintiques 62-series wheels and it works perfectly.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I have a 1984 Oldsmobile Delta 88 with 15 inch 5x4.75 and I'm looking at getting some 14 inch hubcaps but obviously need 14 inch rims, will these fit straight on my 84 Delta 88 and will the hub caps 14 inch Oldsmobile hub caps fit on
Asked by MARK on 11/16/2020
Better call Summit Technical like I did to make sure. There are so many offsets etc. variations.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Would anyone know if these 14x6 would work on my 1959 Chevy Impala with a Power Disc Brake conversion kit installed on it (just front disc). The factory 5" wide rims just barely touch the calipers when the lugs are tightened... any help would be appreciated... Thanks Dave
Asked by DAVE on 10/23/2020
i have a set on my 60 elcamino with disk brakes they work fine. hope that helps john
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Would these fit 65 impala with front disc conversion? And if so would these also tuck? I plan on bagging car
Asked by CARLOS on 6/15/2020
For my application (68 442 with disc brake conversion on front), they fit over the calipers very nicely. They do have a 4" backspace which puts the wheel slightly outboard from the original wheels (they had a 4.5" back space). Not sure if Impala is the same or if it will work with air suspension.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
hello i was reading specs on the 62 wheels , the center bore is 3.13 inch is this the center hole in the wheel , my actual wheels have a 2 3/4 inch hole in the center , this hole fitts right on the axle cap ridge that fits perfect on the actual wheel ( rear wheel application ) do i have the right wheel for my 67 chevelle
also are these rims compatible with my original dog dish caps
thanks for the input
Asked by LOUIS on 3/31/2025
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 14x7 (WVI-62-471204) does feature a 3.13 in. (3 1/8 in.) center bore, referring to the hole in the center of the wheel. This wheel features the incorrect wheel bolt pattern (5 x 4 1/2 in.) for a 1967 Chevy Chevelle. You will want a 5 x 4 3/4 in. wheel bolt pattern, like Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 14x6 (WVI-62-463404).
Both wheels accept 10 1/8 in. outside knob caps as well as many Ford and GM dog dish-style wheel center caps.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will this wheel fit a 1967 mustang with factory disc brakes? Will the factory hubcaps fit?
Asked by STEPHAN on 2/26/2025
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 14x7 features the 5 x 4 1/2 in. wheel bolt pattern, which is a match for the 1967 Ford Mustang. The backspacing is a bit deeper than stock and the offset is within the factory range for the Base GT models most often associated with factory disc brakes. This wheel is designed to accept 10 1/8 in. outside knob caps as well as most Ford and GM factory dog-dish wheel center caps. The center caps and trim rings in the Recommended Parts section of the product page will also fit.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Do these wheels fit the 1980 Toyota pickup dog dish hubcap? Please let me know. Thank you!
Asked by FLORA on 2/7/2019
Thank you for your question. The Wheel Vintiques 62-471204 wheel will not accept your factory Toyota hub cap. At this time we do not offer an option to fit your application.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I want to get a set of wheels with a little larger width for my 1965 Impala but I use the 14" SS style wheel cover. Will the wheel cover fit and stay on these wheels?
Asked by RON on 3/26/2017
YES - I HAVE A 63 IMPALA GOT THEM JUST FOR THAT REASON....
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
what size rotors on conversion kits will work with these wheels on a 1964 chev impala
Asked by KENT on 3/8/2021
Thank you for your question. The Wheel Vintiques 62-4734044 wheel will not fit a 1964 Chevy Impala with disc brakes. The Wheel Vintiques 62-5734044 wheel is 15 in. and fits the application.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these rims clear the calipers on a rear disc brake conversion for a 1963 Impala?
Asked by PAUL on 1/21/2021
Thank you for your question. There are some disc brake kits available that will work with 14 in. diameter wheels like Wheel Vintiques 62-4734044. Your disc brake kit will list the minimum wheel diameter required for clearance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Hi
Is this item one piece or two pieces?
Asked by MOHAMMED on 7/30/2020
It’s a standard welded 2 piece wheel. Center piece welded to outer rim.
I can also say they will not fit full size GM trucks with heavy duty brake option, or without modifications
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I assume this is just a generic photo of a wheel? It lists this wheel as a 15in x 10in, 6 x 5.50 bolt pattern but the picture shows 5 lug? Would like to install these on my rear of my 69 c10 which is 6 bolt. Also other people have talked about not fitting over the drums without spacers? is this true? Thanks for the help.
Asked by WESLEY on 8/4/2020
I had a problem with these exact wheels hitting my tie rod ends on my 1975 k5 4x4 blazer in the front. cant speak for the c10. never tried fitment on the back drums as the fronts didn't work
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these work with a 5/8" wheel stud?
Asked by JAMES on 5/12/2021
No. The biggest lug you can run is a 9/16 like the F-250 trucks use. Now if you wanted to drill out the tapered part of the hole in the wheel that may work. I have the 9/16 on my 520 ci TT fairlane, that seems to stop my ripping out the studs problem I was having
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
I really need this wheel with a 5.5 back space also. I don’t even know if that is an option, or if they exist but like it’s a no brainer if you ask me, is this something that will be able to be acquired, ever?
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
I am needing the same wheel with 5.5" bs. Wheel Vintiques said it would be about four months before they might be able to make any more due to their suppliers not getting them the parts they need to make them.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
I have 15x5 and 15x10, 62 series on a 73 F100 with the "Ford Motor Company" poverty caps and they fit perfectly. If yours are the 10.125" dia. that WV specifies in the description you shouldn't have an issue.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
They appear to be powder coated. They do need a little sanding if you want them to look perfect. For my application I was able to do a quick prep (no sanding) and paint them with a single stage paint.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Are these powder coated primer?
Asked by JEFF on 10/21/2021
They appear to be powder coated. They do need a little sanding if you want them to look perfect. For my application I was able to do a quick prep (no sanding) and paint them with a single stage paint.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Are these wheels a direct fit for a 1965 Ford F100 pickup? I mean the same as OEM?
Asked by JOSEPH on 9/13/2017
Thank you for your question. The Wheel Vintiques 62-550503 is an aftermarket wheel that will very closely resemble a factory Ford rim. However, the correct part number for your 5 x 5.50 in bolt pattern is 62-5655334. This wheel is only offered in 6.00 in wide in this pattern. Please copy and paste the link below into your web browser to view this on our website.
https://www.summitracing.com/oh/parts/wvi-62-5655334
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
will my full wheel cover fit this wheel? step where cover fingers rest is 14-13/16"
Asked by JACK on 4/13/2018
Thank you for your question. The Wheel Vintiques 62-551203 wheel will not accept a full wheel cover. You will need to identify your specific cover and order the wheel accordingly.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these wheels work on a disk brake car?
Asked by JACOB on 8/22/2018
Thank you for your question. Wheel Vintiques 62-553403 is a 15 in. diameter wheel which is the minimum requirement for use with most disc brake kits. This Wheel Vintiques 62-553403 wheel being 5 in. wide will require you to measure the width of the caliper kit and may require you run a wheel spacer to provide the needed clearance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Has anyone used this wheel with factory disc brakes? GM Chevelle, etc.
Asked by JOHN on 10/15/2024
As a 15 in. wheel, Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-553403 meets the minimum requirement for use with most disc brake kits. Due to the 5 in. width, you will need to measure the caliper kit width and may need a wheel spacer to provide the necessary clearance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Hello ,
The original impala 59 hubcaps fits on theses wheels ?Thanks
Asked by ROLANDO on 9/22/2023
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5606334 takes a 10 1/8 in. inside diameter hubcap and mounts over the 3 nobs of the inner ring.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I would also like to know if this wheel will clear disc brakes.
Asked by Customer on 1/4/2026
Because of the multiple different designs of disc brakes whether that be for OE applications or aftermarket kits we recommend test fitting any wheel to ensure fitment with disc brakes and same goes for Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 15x6.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will this 15x6 rim clear the disc brakes. I’m working on a 1966 c-10
Asked by Customer on 12/31/2025
Most modern aftermarket wheels like Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 15x6 (wvi-62-5606334a) are designed with brake upgrades like disc conversions in mind, which is why their backspace/offset is different than factory. Only a test fit will show for certain if there is enough clearance for the specific disc brake kit you are using. You can also use the worksheet we provide (see the Instructions Sheet in the Instructions & Calculators section).
https://static.summitracing.com/global/images/instructions/sum-75808.pdf
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these clear disc brakes on an '82 f100?
Asked by NICHOLAS on 1/17/2025
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5612334 features the 5 x 4 1/2 in. (5 x 114.3mm) Wheel Bolt Pattern, as noted. We show a 5 x 5 1/2 in. wheel bolt pattern for most 1982 Ford F-100 pickup trucks.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5612334 is not vehicle specific and designed to fit most factory setups with the 5 x 4 1/2 in. This would make them likely to clear the front disc brakes on a 1982 Ford F-100 with that bolt pattern. If you are talking about a rear conversion kit, you would need to do a test fit or use the WVI Wheel Fitment Instructions worksheet in the product page's Instructions & Calculators section.
The 1982 Ford F-100 models can have two different wheel bolt patterns due to variations in the vehicle's specifications and configurations related to the engine type and whether the vehicle is equipped with power brakes.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
what size baby moon hub cap do I need for this wheel using the center lugs. there is quite a few sizes
Asked by MICHAEL on 5/31/2019
Stock dog dish or any small hub cap, including moon, have to use an adaptor purchased thru Wheels Vintique. I learned the hard way. Lost two dog dish hub caps first time out. I didn’t know an adaptor was needed.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Hi, will these fit a 1963 Studebaker Lark. Thanks
Asked by THOMAS on 10/3/2020
Measure a existing wheel backspace and bolt circle and compare to specs. If not available take measurements off hub. Lots of help for how to do this on line if you need it. If appears wheel will fit but not 100% sure order one wheel only first.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Hello - What is the center bore hole opening diameter of this wheel?
Asked by FRANK on 4/29/2021
15X6 has a 3.75"
15X7 had a 4.25" for jeep hubs
DAVID from PA | 4/30/2021
Q:
are these wheels disc brake compatible?
Asked by THOMAS on 7/20/2023
Currently the Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5655334 Wheels do not list if they are disc brake capable at this time. However, most wheels will not list this because of the multiple different brake systems out there. Like any wheel we highly recommend test fitting to ensure proper fitment before mounting on a tire.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
are the trim ring and hub caps the same as the wheel viniques O.E. rims of the same size. and if not what size hub caps and rings fit? from pics looks like hub caps are inside fitting.
Asked by WILLIAM on 6/11/2016
The 62 Series OE Style wheel requires a dog dish cap with a back diameter of 10.125". You can use trim ring part #WVI-3005-15-1 or #WVI-3006-15-1.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Do the 70s Chevy C10 10.5" truck dog dish hubcap (like the one pictured) fit these wheels?
Asked by MICHAEL on 6/15/2020
I can't see your picture, but yes they do, I have a set of these wheels with '72 model Dog dish hubcaps on them.
JERRY W from GA | 7/8/2020
Q:
Will these wheels work on a 64 Chevy C10 that has had a front disk brake conversion.
Asked by MARK on 5/27/2018
Thank you for your question. The Wheel Vintiques 62-5706044 wheel comes with a 6 x 5.5 in. bolt pattern. That is the correct bolt pattern for your application. You will have to check your disc brake kit and see if they have any notations or disclaimers on specific wheel diameters.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will these wheels accept Ford 10.5" dog dish hubcaps from the mid 60's? See attached photo.
Asked by DYLAN on 3/29/2023
The Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5712044 Wheels will not work with mid 1960s Ford dog dish hubcaps that are 10.5 in. These are designed to accept 10.125 in. caps only.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I would order these wheels, but I still need black lug nuts. What can you recommend?
And which Baby Moon caps go with it?
Asked by THORSTEN on 6/30/2022
We offer the Ford Performance Parts M-1012-MB black lug nuts set for use with the Wheel Vintiques 62-5712044 wheel and the Baby Moon style Cal Custom CAL-550004 wheel center cap, as well as the following brand-specific Baby Moons.
Wheel Vintiques 1041 (Chevy)
Wheel Vintiques 2031 (Ford)
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Hi i have a 66 Thunderbird im needing rims for, does anyone know if these rims will clear the big 4 piston brake calipers that these car came with from the factory?
Asked by JASON on 6/21/2021
Not sure but I could find out I have a 65 T bird I'm working on and I just bought four over the wheels for my torino won't be until Saturday.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will the standard 1967 Chevy dog dish hub caps fit on these wheels? Thank you
Asked by THOMAS JOH on 11/18/2017
Hi, I asked the question yesterday about the dog dish caps. I forgot to ask if the 15x7 wheels fit okay with the front disc brakes on the '67 Chevelle. Thank you
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
yes, have the dog dish caps on my car plus went to the Northern Ohio Chevelle show in August and talked with 3 folks that all were using those on a 66 .... all had dog dish - this before I bought. Order 1 and try it for yourself
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will the standard 1967 Chevy dog dish hub caps fit on these wheels? Thank you
Asked by THOMAS JOH on 11/18/2017
yes, have the dog dish caps on my car plus went to the Northern Ohio Chevelle show in August and talked with 3 folks that all were using those on a 66 .... all had dog dish - this before I bought. Order 1 and try it for yourself
ALBERT from TN | 11/18/2017
Q:
Will this wheel fit my stock 1952 Chevrolet Styleline deluxe?
Asked by RMICHAEL on 12/9/2022
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5734044 features a universal-fit design for 5 x 4 3/4 in. wheel bolt patterns, matching your 1952 Chevy Styleline Deluxe, but you will still need to check backspacing and other clearances for proper fitment. Please see the Instruction Sheets in the Instructions & Calculators section or call our Tech Line at 330-630-0240 for further assistance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Hello RMICHAEL. If your 1952 Chevrolet Skyline Deluxe has no moderations to the brakes and suspension it should bolt right on. But it would be a good idea to double check the backspacing and fender clearance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I have a 68 Impala with factory 4 piston caliper brakes , will these wheels fit without bottoming out on my calipers?
Asked by DAVE on 9/20/2021
Thank you for your question. The Wheel Vintiques 62-5734044 wheel will fit a 1968 Chevy Impala with factory 4-piston brake calipers without bottoming out under normal driving conditions.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Hello! These are showing as having 16 in stock and shipping availability as tomorrow- can you confirm that is true?
We attempted to buy these a couple of months ago, were shipped the wrong rims, and then were told the ones we ordered (these) were out of stock for the foreseeable future.
If they are available for shipment now, that would be amazing!
Thanks so much.
Kj
Asked by KATHYRN on 9/26/2021
Hello Kj. I apologize for the mix up. We did have a few available but now we are currently out of stock. We are waiting for the material to build these wheels. Current ETA is hopefully March 2022.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Sort of strange this type of question would be sent to another customer as if I’d know the inventory levels. I did receive mine last week, much quicker than the original estimate.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
They are powder-coated in a gray primer. Very durable finish. If you want to have them powder coated, they will need to be chemical stripped first. They can be painted or just run as-is.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will a 15x8 fit over Wilwood D52 brake calipers with out and rubbing? 1974 c10 with stock 1 1/4 rotor. Thanks.
Asked by JUAN on 1/11/2023
The Wheel Vintiques 62-5805044 62 Series Ford-Chevy Style O.E. Primered wheels will fit a Wilwood D52 caliper and 11 in. or smaller rotors on a 1974 Chevy C10.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Although tech support told me they will fit my 73 blazer they DO NOT. They are OE style but the 4.25" backspacing is incorrect. The tie rods will rub on your rim / tire. Wheel Vintiques should know this and stop listing them as OE. Now I need spacers which I don't like to make them work.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Can only verify that on a 70 K10 you need 1/2 inch spacer (max backspace is 3 3/4). If you need 7/16 studs I found them unavailable. Decided to buy different wheels with correct backspace.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
I have POL disc brakes on my 64 C10. The wheels fit over the calipers on my truck. I'm not using these rims on the front of my truck, just the rear so I don't know if they have any problems with clearance with the wheel opening or steering.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
According to their website, they will make them with custom backspacing. Can I order them from Summit with different backspacing? I need 4 7/8".
Asked by CRAIG on 10/15/2019
It's best to call Wheel Vintiques for custom backspacing. Earlier this year, I called them and they didn't even have any 15 inch rim material to make a set for me. I ended up narrowing my axle housing so I could use 4.25 back spacing.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
I don't think so. I looked and didn't see any. These are meant to use a factory 10 1/8" hub cap. You should be able to find the baby moons if you look for trailer hub caps. I used Ford 10 1/2" caps and they snapped on perfectly.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Does anyone know what type of primer it comes with? epoxy or self etch or urethane?? thanks guys. im asking cause im going to use eastwood satin black single stage over it to get the "copo" look for my 71 nova
Asked by SIMON on 1/7/2019
I bet its epoxy primer. I used red scotch brite scuff pad and 320 hand sand paper. Than used self etch primer on small bare metal spots that I broke through on. That single stage will cover just fine
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Do these rims except the 55 Chevy 150 Dog Dish Centre caps
Asked by Customer on 6/10/2025
Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels 62-5834044A will accept 10 1/8 in. outside-knob wheel center caps. This would include many Ford and GM factory dog dish-style center caps.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
Will Chevy dog dish caps work with these?
Asked by BILL on 4/29/2018
As long as they are about this size.
JAMES from VA | 4/30/2018
Q:
Are these wheels lug centric? I would like to know if they fit on a 1993 f150 2wd. Thanks
Asked by GARRETT on 11/16/2020
Yes, these wheels are lug centric. In order to determine if it will fit your Ford pickup, measure your OEM bolt pattern. These fit a 5 lug, 5.5" bolt pattern. This wheel has a 4.25" center hole and 4" Back Space. Measure both on your OEM wheel / vehicle to ensure proper clearance.
If you feel that this answer is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.
Q:
I have a Chevy 1940 master deluxe and im doing Front disk break conversion to a 5 lug will these rims fit the disk breaks? Also will these hold my hubcaps i have 1950s style lancers (spiders) and Cross bars hubcaps 15inch?
Asked by EMILIO on 8/31/2020
I have disc brakes on my 74 scout and had no problems
I bought these for the rear of my 72 F100 2wd. Perfect fit and they look great. They look really nice for anyone looking for a stock-ish appearance in a wider width. Great wheel for any Dodge, Ford, or Jeep with the 5 on 5.5 lug pattern.
The wheels come with basic grey primer and are ready for you to paint to match. I painted them Wimbledon white.
These wheels look amazing on my 1969 ford f100 with the original dog dish hubcaps.
The quality is great but at 4.25" off set, it barely fits my 71 GMC K15. I'm going to have to pick up some spacers to make it work. The customer service tech at Summit said it would fit - nope!
very satisfied with the quality of these wheels. 5 x 5.5" stud pattern & 4.25" pilot hole fits the early jeeps, 1941 to 1986, should also fit first generation Broncos.
I ordered these wheels to put on my '87 Ford Ranger. They are very well made and with the 4.5" offset, fit my truck perfectly. I put a set of 235-60-R15 tires on them and have good clearance with no rubbing. Great set of wheels!
Bought four of these for my '73 Scout (15"x 8") 5 lug with 5 -1/2" spacing and they worked perfectly! The Scout had some old 16-1/2" Jeep wheels on it but I wanted to go back to stock. The stock hubcaps work as well! Great product.
Summit Racing Verified Purchase
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
