streetnstrip
online catalog homepage motorsports brands my garage customer service
Tech Test
57 Which component is not utilized by a rotary engine"
     Crank
     Rotor
     Pistons
     Cam
274 How does a cold plug differ from a hot one in actual construction"
     It has a much longer insulator nose to transfer heat more rapidly
     It has a much longer insulator nose with a long heat transfer path
     It has a much shorter insulator nose with a long heat transfer path
     It has a much shorter insulator nose to transfer heat more rapidly
100 What listed GM transmission, besides the 700-R4, has an overdrive option"
     C-4
     TF727
     200-4R
     TH400
256 Rolling threads after heat treating has occurred should be done for which of the following reasons"
     Heat treating is a time consuming process, and most manufacturers prefer to do this before the easier rolling process
     Heat treating creates distortion, if threads were rolled before they would not be true, or have as great of fatigue life
     Heat treating creates carbon crusting that needs removal
     Heat treating can be done before or after the rolling
310 Which of the following does a block contain"
     Water cooling jackets and oil galleries
     Lifters and valve guides
     Oil galleries and valves
     Cylinder heads and pistons
289 The temperature of liquid coolant is maintained at a certain level by"
     A meter
     A gauge
     A thermostat
     A sensor
13 Billet is …
     Aluminum
     Steel
     Tungsten
     A block of any given metal
8 What is a dry sump oil system"
     Separate tank is used for the oil reserve along with an external belt-driven oil pump
     Separate tank is used for a graphite based dry oil reserve along with an external belt-driven oil pump
     Separate tank is used for the oil reserve along with an internal shaft-driven oil pump
     Separate tank is used for a graphite based dry oil reserve along with an internal shaft-driven oil pump
421 What two materials are engine pulleys usually made from"
     Steel and wood
     Wood and plastic
     Aluminum and steel
     Aluminum and plastic
306 To lighten a piston slightly where would you machine material away from"
     The head of the piston.
     The underside of the skirt opposite the small side of the piston pin centerline.
     The balance pads.
     The outside taper of the skirt.

spacerHave any Questions? Give us a call at: 1-800-230-3030 or 1-330-630-3030

SiteSafe
Provide Feedback | Site Map | Terms of Use | Privacy & Security
Copyright © 2008 by Autosales, Incorporated
dba Summit Racing Equipment | Trademarks
 HACKER SAFE certified sites prevent over 99% of hacker crime.