Outdated Internet Browser Detected

The Internet Browser you are using cannot establish a secure connection to SummitRacing.com which will prevent you from being able to Log In or Checkout. This is most likely because SSL 3.0 is your default SSL setting. This makes you vulnerable to the "POODLE exploit" and to ensure your security, it is not allowed on our site. Please change your browser security settings to not allow SSL 3.0 or attempt to update your browser using these links.

In-Store Pickup Location Close

Tuff Country Axle Shims 90014

Tuff Country 90014 - Tuff Country Axle Shims

Image is a representation of this item.
Actual item may vary.

Loading media


In progress

Pinion Shims, Cast Iron, 4 Degree, 2 in. Wide, Pair

Estimated Ship Date: Today Would you rather pick it up? Select Location

View Similar Products

Brand: Tuff Country

Manufacturer's Part Number: 90014

Part Type: Pinion Angle Shims

Product Line: Tuff Country Axle Shims

Summit Racing Part Number: TFY-90014

UPC: 698815900143

Shim Angle: 4 degrees

Shim Material: Cast iron

Width (in): 2.000 in.

Quantity: Sold as a pair.

Notes: Shims include 3/8 in. center pins.

In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

These Tuff Country axle shims can help to correct driveline vibration problems that occur with some lifted vehicles. Available for a variety of applications, these shims include center pins.

Most Helpful Reviews Review this Product

4 Customer Reviews for Tuff Country 90014 - Tuff Country Axle Shims

Average Customer Review

5 Star

(0)

4 Star

(2)

3 Star

(0)

2 Star

(0)

1 Star

(2)
+See All 4 Reviews

tuff country axle shims

performed as expected and install easily.

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: ROBERT from NY

Date: September 15, 2014

Appearance
Ease of Installation
Price/Value
Quality

Tuff Country Axle Shims

Summit RacingSummit Racing Verified Purchase

My main complaint is these cast shims were warped. That is, the four corners weren't in the same plane; one corner was high (or low, depending on which corner is picked as out). This results in a wobble of the shim on the leaf spring surface, and point loading when the u-bolts are torqued to spec. Likewise with the upper side with respect to the axle perch. This wouldn't be a big problem if the shims were maleable. But these shims are cast iron, therefore hard and prone to brittle fracture. Not the best product. ...read more

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: WILLIAM from AZ

Date: August 21, 2014

Appearance
Ease of Installation
Price/Value
Quality

Fast shipping

Summit RacingSummit Racing Verified Purchase

I would give this 5 stars but I had to drill the hole and make it bigger which wasn't a problem at all (used it on a 56 belair). It works great though. Shipping was 24 hour turn around even though I only paid regular. I like the material. I'm not set on aluminum because my car is a daily driver. I could just be paranoid but anyway, it's great.

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: LEONORA from CA

Date: April 08, 2014

Appearance
Ease of Installation
Price/Value
Quality

Axle Shims - Brittle

Summit RacingSummit Racing Verified Purchase

Shim snapped in half while torquing the leaf spring pack together. The shim was not able to conform to the curve in the spring pack.

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: LOGAN from FL

Date: February 24, 2014

Appearance
Ease of Installation
Price/Value
Quality

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close