Manufacturer's Part Number:
Summit Racing Part Number:
Hydraulic roller follower
Basic Operating RPM Range:
Intake Duration at 050 inch Lift:
Exhaust Duration at 050 inch Lift:
Duration at 050 inch Lift:
234 int./234 exh.
Advertised Intake Duration:
Advertised Exhaust Duration:
276 int./276 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
Exhaust Valve Lift with Factory Rocker Arm Ratio:
Valve Lift with Factory Rocker Arm Ratio:
0.580 int./0.580 exh.
Lobe Separation (degrees):
Camshaft Gear Attachment:
Valve Springs Included:
Outside Diameter of Outer Spring (in):
Valve Stem Seals Included:
Timing Chain and Gears Included:
Assembly Lubricant Included:
Valve Springs Required:
Camshaft Manufacturers Description:
Race; fair idle, strong top-end, 6,500 rpm plus powerband. Ideal for engines with power adders rated at 15 psi-plus. Works with Trick Flow Twisted Wedge 185 or 195 heads; exhaust, cold air intake, 3.73 or lower gears, and tuning recommended. Compression: stock minimum.
Piston-to-valve clearance measurement required. Includes Trick Flow®Track Max® Twisted Wedge® Track Heat® beehive-style valve springs.
Choose In-store pick-up (OH, GA, NV) on our web site.
Trick Flow® takes the guesswork out of choosing the right cams and valvetrain upgrades for your Ford 4.6L/5.4L 2V modular engine with these Track Max® Hydraulic Roller Camshafts and Valve Spring Upgrade Kits. Kit number TFS-K51802001 is perfect for naturally aspirated street engines operating in the 1,500-5,000 rpm range. Kit number TFS-K51802002 has an 1,800-6,500 rpm operating range and is ideal for mild street/strip engines with power adders using a maximum of 5-6 psi of boost. Kit number TFS-K51802003 delivers strong mid-range to top-end power (up to 6,500 rpm) in extreme duty street and naturally aspirated race engines. Kit number TFS-K51802004 is Trick Flow's highest-performing modular cam kit. It is recommended for maximum duty race engines with power adders and boost pressures of 15-plus psi that operate in excess of 6,500 rpm.
These kits come complete with new cams and valve springs plus chromoly retainers, valve locks, seals, 12mm bolts and washers, and installation instructions. PCM tuning is recommended for maximum performance.