Shop Our Store
Departments
- SearchMake/Model
- SearchMake/Engine
In-Store Pickup Location Close
Would You Like to Pick it up?
Select your preferred location and we'll note which parts are ready to be picked up TODAY.
Rubicon Express Super-Ride Suspension Lift Kits RE6025
$584.99
Suspension Lift Kits, Super Ride, 3.50 in. Lift, Coil Springs, Leaf Springs, Jeep, Cherokee, Kit
-
The part REX-RE6025 has an additional shipping charge of $16.00 per item due to its large size and/or weight.
Estimated Ship Date: Today Would you rather pick it up? Select Location
View Similar Products
Results 1 - 16 of 16
Make:
JEEP
Model:
CHEROKEE
Submodel:
CLASSIC
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.000 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
CLASSIC
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.250 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
CLASSIC
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.500 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
CLASSIC
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.750 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
LIMITED
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.000 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
LIMITED
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.250 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
LIMITED
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.500 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
LIMITED
Beginning Year:
1998
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.750 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SE
Beginning Year:
1994
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.000 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SE
Beginning Year:
1994
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.250 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SE
Beginning Year:
1994
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.500 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SE
Beginning Year:
1994
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.750 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SPORT
Beginning Year:
1989
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.000 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SPORT
Beginning Year:
1989
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.250 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SPORT
Beginning Year:
1989
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.500 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make:
JEEP
Model:
CHEROKEE
Submodel:
SPORT
Beginning Year:
1989
Ending Year:
2001
Engine Type:
L6
Engine Family:
AMC inline 6-cylinder
Fuel Type:
Gasoline
Amount of Lift Front:
3.500 in.
Amount of Lift Rear:
3.500 in.
Drivetrain:
4WD
Front Suspension:
Solid front axle
Number of Lugs:
5
Maximum Tire Height (in):
31 in.
Maximum Tire Width (in) (application):
10.5 in.
Recommended Wheel Width (in):
8.00 in.
Recommended Wheel Backspace (in):
4.750 in.
Footnotes:
1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
- 1
Suggested Parts
Parts that may improve the performance or installation of part number REX-RE6025
Rubicon Express RXJ701 - Rubicon Express Extreme-Duty Monotube Shocks
RUBICON MONO-TUBE 27.8/17.2 S/L
$79.99
Email this page Close
Receive the latest offers by email
or
Follow Us
Have any Questions? Give us a call at:
or 1-330-630-3030
Terms
of Use |
Privacy and Security
Copyright
2013
by AUTOSALES, INCORPORATED
dba Summit Racing Equipment | Trademarks
