In-Store Pickup Location Close

Rubicon Express Super-Ride Suspension Lift Kits RE6025

Get Free Shipping with Your Order over $99!

Suspension Lift Kits, Super Ride, 3.50 in. Lift, Coil Springs, Leaf Springs, Jeep, Kit

  • Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Estimated Ship Date: Today Would you rather pick it up? Select Location

Results 1 - 16 of 16

You Have Selected:

Narrow Your Results

Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: COUNTRY
Beginning Year: 1993
Ending Year: 1997
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: COUNTRY
Beginning Year: 1993
Ending Year: 1997
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: COUNTRY
Beginning Year: 1993
Ending Year: 1997
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: COUNTRY
Beginning Year: 1993
Ending Year: 1997
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: SPORT
Beginning Year: 1989
Ending Year: 2001
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: SPORT
Beginning Year: 1989
Ending Year: 2001
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: SPORT
Beginning Year: 1989
Ending Year: 2001
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: SPORT
Beginning Year: 1989
Ending Year: 2001
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
  • 1

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close