Outdated Internet Browser Detected

The Internet Browser you are using cannot establish a secure connection to SummitRacing.com which will prevent you from being able to Log In or Checkout. This is most likely because SSL 3.0 is your default SSL setting. This makes you vulnerable to the "POODLE exploit" and to ensure your security, it is not allowed on our site. Please change your browser security settings to not allow SSL 3.0 or attempt to update your browser using these links.

In-Store Pickup Location Close

Rubicon Express Super-Ride Suspension Lift Kits RE6025

Get Totally Free Shipping with Your Order!

Suspension Lift Kits, Super Ride, 3.50 in. Lift, Coil Springs, Leaf Springs, Jeep, Kit

Estimated Ship Date: Tomorrow Would you rather pick it up? Select Location

  • Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Results 1 - 20 of 29

You Have Selected:

Narrow Your Results

Make: JEEP

Model: CHEROKEE

Submodel: BASE

Beginning Year: 1984

Ending Year: 1986

Engine Type: V6

Engine Family: GM V6

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: BASE

Beginning Year: 1984

Ending Year: 1993

Engine Type: L4

Engine Family: AMC 4-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: BASE

Beginning Year: 1985

Ending Year: 1987

Engine Type: L4

Engine Family: Renault diesel 4-cylinder

Fuel Type: Diesel

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: BASE

Beginning Year: 1987

Ending Year: 1993

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: BRIARWOOD

Beginning Year: 1991

Ending Year: 1992

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CHIEF

Beginning Year: 1985

Ending Year: 1986

Engine Type: V6

Engine Family: GM V6

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CHIEF

Beginning Year: 1985

Ending Year: 1987

Engine Type: L4

Engine Family: Renault diesel 4-cylinder

Fuel Type: Diesel

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CHIEF

Beginning Year: 1985

Ending Year: 1988

Engine Type: L4

Engine Family: AMC 4-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CHIEF

Beginning Year: 1987

Ending Year: 1988

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CLASSIC

Beginning Year: 1996

Ending Year: 1996

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CLASSIC

Beginning Year: 1998

Ending Year: 2000

Engine Type: L4

Engine Family: AMC 4-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: CLASSIC

Beginning Year: 1998

Ending Year: 2001

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: COUNTRY

Beginning Year: 1993

Ending Year: 1997

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LAREDO

Beginning Year: 1985

Ending Year: 1986

Engine Type: V6

Engine Family: GM V6

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LAREDO

Beginning Year: 1985

Ending Year: 1987

Engine Type: L4

Engine Family: Renault diesel 4-cylinder

Fuel Type: Diesel

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LAREDO

Beginning Year: 1985

Ending Year: 1989

Engine Type: L4

Engine Family: AMC 4-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LAREDO

Beginning Year: 1987

Ending Year: 1992

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LIMITED

Beginning Year: 1987

Ending Year: 1992

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LIMITED

Beginning Year: 1998

Ending Year: 2000

Engine Type: L4

Engine Family: AMC 4-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

Make: JEEP

Model: CHEROKEE

Submodel: LIMITED

Beginning Year: 1998

Ending Year: 2001

Engine Type: L6

Engine Family: AMC inline 6-cylinder

Fuel Type: Gasoline

Amount of Lift Front: 3.500 in.

Amount of Lift Rear: 3.500 in.

Drivetrain: 4WD

Front Suspension: Solid front axle

Number of Lugs: 5

Maximum Tire Height (in): 31 in.

Maximum Tire Width (in) (application): 10.5 in.

Recommended Wheel Width (in): 8.00 in.

Recommended Wheel Backspace (in): 4.500 in.

Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
  • 1
  • 2

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close