Outdated Internet Browser Detected

It appears that the Internet Browser you are using to connect to SummitRacing.com is outdated and insecure. To continue to use SummitRacing.com, you must upgrade your browser to a newer, secure version. Use these links to help you upgrade your browser.

In-Store Pickup Location Close

Rubicon Express Super-Ride Suspension Lift Kits RE6025

Get Totally Free Shipping with Your Order!

Suspension Lift Kits, Super Ride, 3.50 in. Lift, Coil Springs, Leaf Springs, Jeep, Kit

Estimated Ship Date: Tomorrow Would you rather pick it up? Select Location

  • Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Manufacturer's Part Number: RE6025
Summit Racing Part Number: REX-RE6025

UPC: 614901441482
Primary Front Lift Component: Coil spring
Primary Rear Lift Component: Leaf spring
Front Shocks/Struts Included: No
Rear Shocks/Struts Included: No
Brake Lines Included: Yes
Hardware Included: Yes
Quantity: Sold as a kit.
In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

Rubicon Express Super-Ride suspension lift kits provide a comfortable ride for your Jeep. By eliminating weak factory arms, Super-Ride control arms provide better stance and performance with factory-like on-road handling and ride quality and no additional road noise or vibration! Rubicon builds their suspension components with the highest quality metals that are flawlessly finished for added durability and reliability for your Jeep application. Choose value and performance--choose Rubicon Express Super-Ride suspension lift kits.


Results 1 - 20 of 116

Narrow Your Results

Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1986
Engine Type: V6
Engine Family: GM V6
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1986
Engine Type: V6
Engine Family: GM V6
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1986
Engine Type: V6
Engine Family: GM V6
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1986
Engine Type: V6
Engine Family: GM V6
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1984
Ending Year: 1993
Engine Type: L4
Engine Family: AMC 4-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1985
Ending Year: 1987
Engine Type: L4
Engine Family: Renault diesel 4-cylinder
Fuel Type: Diesel
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1985
Ending Year: 1987
Engine Type: L4
Engine Family: Renault diesel 4-cylinder
Fuel Type: Diesel
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1985
Ending Year: 1987
Engine Type: L4
Engine Family: Renault diesel 4-cylinder
Fuel Type: Diesel
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1985
Ending Year: 1987
Engine Type: L4
Engine Family: Renault diesel 4-cylinder
Fuel Type: Diesel
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BASE
Beginning Year: 1987
Ending Year: 1993
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BRIARWOOD
Beginning Year: 1991
Ending Year: 1992
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.000 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BRIARWOOD
Beginning Year: 1991
Ending Year: 1992
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.250 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BRIARWOOD
Beginning Year: 1991
Ending Year: 1992
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.500 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.
Make: JEEP
Model: CHEROKEE
Submodel: BRIARWOOD
Beginning Year: 1991
Ending Year: 1992
Engine Type: L6
Engine Family: AMC inline 6-cylinder
Fuel Type: Gasoline
Amount of Lift Front: 3.500 in.
Amount of Lift Rear: 3.500 in.
Drivetrain: 4WD
Front Suspension: Solid front axle
Number of Lugs: 5
Maximum Tire Height (in): 31 in.
Maximum Tire Width (in) (application): 10.5 in.
Recommended Wheel Width (in): 8.00 in.
Recommended Wheel Backspace (in): 4.750 in.
Footnotes: 1 - Vehicle will require alignment after kit is installed.
8 - Rear pinion shims required if CV driveshaft is used.
11 - Any tire wider than a 10.5 in. will need a BSM of 4.00-4.75 in.
12 - Kit comes standard with D35 axle u-bolts.
17 - For D44 rear axle use RE2445 u-bolts.
23 - 1997-2001 Cherokees have smaller fender openings. Next size down tire is recommended.
32 - Over 3.50 in. of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft when driving in part-time or locked constant use 4WD.
33 - All ride height increases are approximate and will vary due to vehicle specifications.
36 - For C8.25 or D44 u-bolts order kit with RE1225.

1 Result Found

Narrow Your Results

Rubicon Express RE15152 - Rubicon Express Braided Stainless Steel Brake Lines

Click here for more information about Rubicon Express RE15152 - Rubicon Express Braided Stainless Steel Brake Lines

Brake Hose, Braided Stainless Steel, 18.00 in. Length, Rear, Jeep, Each

Part Number: REX-RE15152

Estimated Ship Date: Tomorrow

$41.99

  • Drop Ship

    This part is normally shipped directly from the manufacturer / Supplier.



6 Results Found

Narrow Your Results

Rubicon Express RE1463 - Rubicon Express Extreme-Duty Lift Leaf Springs

Click here for more information about Rubicon Express RE1463 - Rubicon Express Extreme-Duty Lift Leaf Springs

Leaf Springs, Rear, Silver Powdercoated, Jeep, 3.5 in. Lift, Each

Part Number: REX-RE1463

Estimated Ship Date: Tomorrow

$174.99

  • Free Shipping

    Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Rubicon Express RE1300 - Rubicon Express Lift Coil Springs

Click here for more information about Rubicon Express RE1300 - Rubicon Express Lift Coil Springs

Coil Springs, Front, Silver Powdercoated, Jeep, 3.5 in. Lift, Pair

Part Number: REX-RE1300

Estimated Ship Date: Tomorrow

$174.99

  • Drop Ship

    This part is normally shipped directly from the manufacturer / Supplier.

  • Free Shipping

    Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Rubicon Express RE3705 - Rubicon Express Super-Ride Control Arms

Click here for more information about Rubicon Express RE3705 - Rubicon Express Super-Ride Control Arms

Control Arms, Super-Ride, Front Lower, Tubular, Chromoly, Silver Powdercoated, Jeep, 4WD, Pair

Part Number: REX-RE3705

Estimated Ship Date: Tomorrow

$179.99

  • Free Shipping

    Order this item and get free delivery and handling on your entire order! Oversize fees also waived on this item. Valid on orders shipped in the contiguous United States.

Rubicon Express RE2421 - Rubicon Express Leaf Spring U-Bolts

Click here for more information about Rubicon Express RE2421 - Rubicon Express Leaf Spring U-Bolts

U-Bolt, Round Style, Steel, Zinc Plated, Jeep, Dana 35, Rear, Kit

Part Number: REX-RE2421

Estimated Ship Date: Tomorrow

$37.99

Rubicon Express RE1171 - Rubicon Express Sway Bar Disconnect Adapters

Click here for more information about Rubicon Express RE1171 - Rubicon Express Sway Bar Disconnect Adapters

Sway Bar Disconnect Adapter

Part Number: REX-RE1171

Estimated Ship Date: Tomorrow

$29.99

Rubicon Express RE1175 - Rubicon Express Sway Bar End Links

Click here for more information about Rubicon Express RE1175 - Rubicon Express Sway Bar End Links

Sway Bar End Link

Part Number: REX-RE1175

Estimated Ship Date: Tomorrow

$29.99

  • Drop Ship

    This part is normally shipped directly from the manufacturer / Supplier.


Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close