Outdated Internet Browser Detected

The Internet Browser you are using cannot establish a secure connection to SummitRacing.com which will prevent you from being able to Log In or Checkout. This is most likely because SSL 3.0 is your default SSL setting. This makes you vulnerable to the "POODLE exploit" and to ensure your security, it is not allowed on our site. Please change your browser security settings to not allow SSL 3.0 or attempt to update your browser using these links.

In-Store Pickup Location Close

Pfadt Johnny O'Connell Signature Stage 1 Suspension Packages 1150028

Suspension Package, Johnny O'Connell Signature Stage 1, Shocks/Struts, Sway Bars, Chevy, Kit

Would you rather pick it up? Select Location

View Similar Products

See parts for Pfadt Race Engineering

Pfadt Johnny O'Connell Signature Stage 1 Suspension Packages

Brand: Pfadt Race Engineering

Manufacturer's Part Number: 1150028

Part Type: Suspension Handling Packages

Product Line: Pfadt Johnny O'Connell Signature Stage 1 Suspension Packages

Summit Racing Part Number: PRE-1150028

Front Coil Springs Included: No

Rear Coil Springs Included: No

Rear Leaf Springs Included: No

Front Shocks/Struts Included: Yes

Front Shock Type: Gas-charged monotube

Rear Shocks/Struts Included: Yes

Rear Shock Type: Gas-charged monotube

Front Sway Bar Included: Yes

Front Sway Bar Finish: Yellow powdercoated

Front Sway Bar Type: Hollow

Front Sway Bar Diameter (in): 1.374 in.

Front Sway Bar Diameter (mm): 34.90mm

Rear Sway Bar Included: Yes

Rear Sway Bar Finish: Yellow powdercoated

Rear Sway Bar Type: Hollow

Rear Sway Bar Diameter (in): 1.125 in.

Rear Sway Bar Diameter (mm): 28.60mm

Tie Rod Sleeves Included: No

End Link Bushings Included: Yes

Rear Leaf Spring Bushings Included: No

Sway Bar Bushings Included: Yes

Upper Trailing Arms Included: No

Lower Trailing Arms Included: No

Trailing Arm Mount Braces Included: No

Panhard Bar Included: No

Torque Arm Included: No

Upper Control Arms Included: No

Lower Control Arms Included: No

Front Strut Tower Bar Included: No

K-Member Support Brace Included: No

Rear Strut Tower Bar Included: No

Subframe Connectors Included: No

Chassis Stiffener Included: No

Calipers Included: No

Rotors Included: No

Brake Pads Included: No

Brake Lines Included: No

Wheel Studs Included: No

Center Link Included: No

Spindles Included: No

Inner Tie Rod Ends Included: No

Outer Tie Rod Ends Included: No

Mounting Hardware Included: Yes

Quantity: Sold as a kit.

In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

Pfadt and Johnny O'Connell have teamed up to create Signature Stage 1 suspension packages for your Corvette! When the professional racing skills of a 4-time LeMans winner joined the engineering expertise of Pfadt Race Engineering, a suspension package tuned to perfection was born. Designed and well-tested, these Signature Stage 1 packages deliver race car level road-holding ability with daily driver streetability. The packages include a set of Sport sway bars, bushings and end links, plus bolt-in shock replacements for each corner. And, you don't need to know how to tune the suspension--that job has been done for you! Your Corvette will be better balanced, better performing, and more easily managed on the street--and the track. Get suspension optimized by professionals for your Corvette with these Pfadt Johnny O'Connell Signature Stage 1 packages.

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close