Outdated Internet Browser Detected

The Internet Browser you are using cannot establish a secure connection to SummitRacing.com which will prevent you from being able to Log In or Checkout. This is most likely because SSL 3.0 is your default SSL setting. This makes you vulnerable to the "POODLE exploit" and to ensure your security, it is not allowed on our site. Please change your browser security settings to not allow SSL 3.0 or attempt to update your browser using these links.

In-Store Pickup Location Close

PerTronix Ignitor® Solid-State Ignition Systems 1181LS

Distributor Conversion, Ignitor®, 12 V, Kit

Estimated Ship Date: Today Would you rather pick it up? Select Location

Brand: PerTronix

Manufacturer's Part Number: 1181LS

Part Type: Electronic Distributor Conversion Kits

Product Line: PerTronix Ignitor® Solid-State Ignition Systems

Summit Racing Part Number: PNX-1181LS

UPC: 694342015206

Conversion Kit Trigger Style: Hall effect

Ground: Negative

Advance Type: Vacuum and mechanical

Rev Limiter: No

Volts: 12 V

Quantity: Sold as a kit.

Notes: Built-in point cam lobe sensor.

CARB EO Number: D-57-22 (pdf)
To see a list of qualifying vehicles, enter CARB EO Number D-57-22

In-Store Pickup: Choose In-store pick-up (OH, GA, NV) on our web site.

PerTronix's Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. The systems are immune to heat, oil, and debris and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap.

Warranty

Most Helpful Reviews Review this Product

4 Customer Reviews for PerTronix 1181LS - PerTronix Ignitor® Solid-State Ignition Systems

Average Customer Review

5 Star

(4)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)
+See All 4 Reviews

Ignitor ignition system

Summit RacingSummit Racing Verified Purchase

I purchased the 1181LS unit for my 56 Olds 324 and the installation is a snap. Remove the old points and condenser, the new unit sits where the old condenser was, using the same holes. Use a box cutter to cut thru the old grommet at the bottom of the distributor to install the new grommet.Thread the wires thru the grommet connecting the red wire to the + terminal on the coil and the black wire to the - terminal. I also installed the 40K volt flame thrower coil, it fit inside the polished coil housing I already had. The engine fired immediately ...read more

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: CHARLES from IL

Date: December 08, 2014

Appearance
Ease of Installation
Price/Value
Quality

jake

Summit RacingSummit Racing Verified Purchase

easy to install, better design than 1181

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: RONALD from UT

Date: October 04, 2014

Appearance
Ease of Installation
Price/Value
Quality

Pertronix 1181LS

Summit RacingSummit Racing Verified Purchase

Had trouble with my 68 Camaro Convertible starting.Has 327 small block. Put this easy to install ignition system in my standard distributor. Placed my rotary cap on and my cap with plugs. Placed the new Coil for the Pertronix in and WHAT A DIFFERENCE. Timed the engine and away I went. Has lots of get up and go now. No slow down when I put on the gas. ...read more

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: FLORA from MD

Date: June 20, 2014

Appearance
Ease of Installation
Price/Value
Quality

petronix ignition

Summit RacingSummit Racing Verified Purchase

very good product. had problems when first installed, followed instructions in the diagnosis chart and made it work.

0 of 0 found this review helpful.

report abuse

Report Abuse Close

If you feel that this review is inappropriate and should be removed from the site, report it to us by clicking the "Report Abuse" button below.

Cancel

Reviewer: JOHN from TX

Date: April 29, 2014

Appearance
Ease of Installation
Price/Value
Quality

Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles

Back To Results
Email this page Close
Close